DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Only One Name Means ProTek’Tion™ www.protekdevices.com05434.R0 7/13 Page 1
05434 PLRO1210 Series
deScRiPtiOn
Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, por- table electronics and automotive applications. These devices are suitable for automated assembly and are designed to save on board space.
FeatuReS
- Resettable Over-Current Protection
- Very Low Resistance
- High Current Rating
- Small Footprint of 1210
- Fast Time-to-Trip
- Lead-Free Solder Termination
- RoHS & REACH Compliant mechanica L cha Racte RiStic S
- Surface Mount Device: Size 1210
- Approximate Weight: 0.0164 grams
- Lead-Free
- 8mm Tape and Reel Per EIA Standard 481 aPPL icati OnS
- Mobile Phone Battery Packs
- Cordless Phone Battery Packs
- Mobile Radio Packs
- Computer Battery Packs
- Camcorder Battery Packs
- SMART Phone Battery Packs
- Computer Motherboards envi ROnmenta L SP eciFicati OnS
- Recommended Storage Conditions: 40°C to 85°C
- Passive Aging: 85°C, 1000 Hours
- Moisture Resistance: 85% RH, 85°C, 1000 Hours
- Thermal Shock: -40°C to 85°C, 30 Minute Cycle, 20 Cycles
- Solder Leach Resistance and Terminal Adhesion: Per EIA-576 Test Ptc device
Only One Name Means ProTek’Tion™ www.protekdevices.com05434.R0 7/13 Page 2 tyPica L device cha Racte RiStic S the RmaL deRatinG cha Rt - ih(a) PaRt num BeR -40°c -20°c 0°c 25°c 40°c 50°c 60°c 70°c eLectRica L SPeciFicati OnS @ 25°c PaRt num BeR maRkin G cOde hOLdin G cuRRent ih amPS tRiP cuRRent it amPS OPeRatinG vOLtaGe vdc vOLtS inte RRuPt cuRRent imaX amPS maXium time -tO-tRiP @5 iha ttRiP Seconds maXimum tRiPPed State POWeR diSSiPatiOn @6v Pd WattS ReFeRence ReSiStance (note 1) R OhmS maXimum tWO hOuRS POSt ReFLOW ReSiStance R OhmSmin tyP nOteS 1. The maximum resistance of two hours post reflow is a reference value. The value may change a little according to reflow conditions and soldering state.
Only One Name Means ProTek’Tion™ www.protekdevices.com05434.R0 7/13 Page 3 Packa Ge OutLine and Pad LayOut inFORmatiOn OutLine dimen SiOnS dim miLLimete RS inche S min maX min maX A 3.00 3.43 0.12 0.14 B 2.35 2.80 0.09 0.11 C 1.00 0.04 D 0.25 0.75 0.01 0.03 E 0.10 0.50 0.04 0.02 nOteS 1. Dimensions are exclusive of mold flash and metal burrs. OutLine dimen SiOnS dim miLLimete RS inche S nOm nOm F 2.50 0.01 G 1.00 0.04 H 2.00 0.08 nOteS 1. Dimensions are exclusive of mold flash and metal burrs. D E A F C G G H B
Only One Name Means ProTek’Tion™ www.protekdevices.com05434.R0 7/13 Page 4
ORdeRinG inFORmatiOn
BaSe PaRt num BeR LeadFRee SuFFiX taPe SuFFiX Qty/ReeL ReeL SiZe tuBe Qty PLRO1210-xxx N/A -T7 4,000 7” N/A This device is only available in a Lead-Free configuration.
10 Pitches Cumulative
Tolerance on tape ± 0.2 WF EP2 P0D P t User Direction of Feed Top Cover Tape SPeciFicati OnS Ree L dia. taPe Width a0 B0 k0 d e F W P0 P2 P t nOteS 1. Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA-481. 3. Suffix - T7 = 7” Reel - 4,000 pieces per 8mm tape. 4. Marking on Part - marking code.
Only One Name Means ProTek’Tion™ www.protekdevices.com05434.R0 7/13 Page 5 COPYRIGHT © ProTek Devices 2013 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. cOmPany PROFiLe In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage pro- tection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electro- magnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. cOntact uS corporate headquarters
2929 South Fair Lane
Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Protek devices (asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com