PLO WELWYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Inductance less than 10 nanohenries Note: When ordering the alternate configuration please add an ‘A’ after the part number. (ie. PLO-3A) Standard test points for PLO-3 and PLO-5 are 44.45mm; test points for PLO-7, PLO-10 and PLO-15 are 63.50mm. Low Resistance Power Wirewounds PLO Series
- 3 watts to 15 watts
- ±1, 2, 3, 5 and 10% tolerance
- 0.005 ohm to 0.18 ohm
- TC’s from 30 ppm/°C to +500 ppm/°C Dimensions (mm) Type L W H d E General Note Welwyn Components reserves the right to make changes in product specification without notice or liability. All information is subject to Welwyn’s own data and is considered accurate at time of going to print. © Welwyn Components Limited · Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com Type PLO-3 PLO-5 PLO-7 PLO-10 PLO-15 Power @ 25°C watts 3 5 7 10 15 Resistance range ohms R005 to R18 R005 to R18 R01 to R18 R01 to R18 R01 to R18 Electrical Data Physical Data Issue B · 03.02 A subsidiary of TT electronics plc Welwyn Components 106 L d W H Packaging Resistors are supplied bulk packed. Standard Configuration Type PLO Type PLO-XA EE Alternate Configuration Percent Rated Load Hot Spot Temperature (°C) Ambient Temperature (°C) Percent Rated Load Power Derating Temperature Rise