PLH-P AIM-TTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
For more complete information on any product, please visit our web site: www.aimtti.com Measurably better value Model Outputs Voltage / Current Power Interfaces PL068 One 0 to 6V / 0 to 8A 48W PL155 One 0 to 15V / 0 to 5A 75W - PL303 One 0 to 30V / 0 to 3A 90W - PL601 One 0 to 60V / 0 to 1.5A 90W - PL303QMD Two 2 x (0 to 30V / 0 to 3A) 180W - PL303QMT Three 2 x (0 to 30V / 0 to 3A) + 0 to 6V / 0 to 8A 228W PL068P One 0 to 6V / 0 to 8A 48W RS232/USB/LAN PL155P One 0 to 15V / 0 to 5A 75W RS232/USB/LAN PL303P One 0 to 30V / 0 to 3A 90W RS232/USB/LAN PL601P One 0 to 60V / 0 to 1.5A 90W RS232/USB/LAN PL303QMDP Two 2 x (0 to 30V / 0 to 3A) 180W RS232/USB/LAN PL303QMTP Three 2 x (0 to 30V / 0 to 3A) + 0 to 6V / 0 to 8A 228W RS232/USB/LAN Brief specifications for main outputs: Line & load regulation: <0.01%. Output noise: < 0.4mV rms. Meter accuracies: voltage - 0.1% ± 1digit, current - 0.3% ± 3 digits. Sizes: singles - 105 x 130 x 290/315mm; dual - 210 x 130 x 290mm triple - 315 x 130 x 290mm (WxHxD) manual & bus programmable - Laboratory Power Supplies High performance power supplies Single, dual and triple outputs Linear regulation, 48W to 228W Manual or bus programmable RS-232, USB, LAN or GPIB The New PL series represents the successor to best-selling PL series which became an “industry standard”. This ultra-compact linear regulated design retains the traditional analog controls of the PL but adds important digital features. PL & PL-P series Linear regulation provides ultra-low noise Highly compact (¼ rack 3U) with small bench footprint True analog controls with advanced digital features Settings can be locked at the touch of a button 4 digit voltage and current meters on each output Low current range with 0.1mA resolution Constant voltage or constant current operation Independent, tracking or true parallel modes (QMD & QMT) High current (8A), high precision (1mV resolution) output on PL303QMT Front and rear power and sense terminals (PL-P models) Analog remote control (PL-P single output models) RS-232, USB and LAN/LXI interfaces (PL-P models) GPIB optional The New PL series is the solution for users requiring an advanced linear regulated precision bench power supply that retains conventional analog controls. It’s ultra-compact design uses minimal space on the bench or in the rack. The New PL-P series offers the same manual control features but adds full remote control using analog, RS232, USB and LAN interfaces, the latter conforming with LXI. When working with any piece of equipment, engineers tend to require a voltage source variable over only a narrow range. That’s where the V-Span function comes in. It allows the user to redefine the end-stop values of the voltage control to create a specific voltage range. For example - An engineer is working on a circuit that will operate from four NiMh cells. They use V-Span to set a Vmax of 5.8 volts (to prevent over-voltage damage) and a Vmin of 3.6 volts (to ensure that the circuit doesn’t reset). They now have a power supply which provides high-resolution analog control over the exact voltage range they need. The New PL-P series offers a comprehensive set of digital interfaces including RS232, USB and LAN (Ethernet) as standard, with GPIB optional. The LAN interface is compliant with LXI-C. LXI (LAN eXtensions for Instrumentation) is the next-generation, modular architecture standard for automated test systems, and is expected to become the successor to GPIB in many systems. For more information concerning LXI visit: www.aimtti.com/go/lxi High voltage versions of PL Series Manual or bus programmable 90W power at 120V or 250V RS-232, USB, LAN or GPIB Model Outputs Voltage / Current Power Interfaces PLH120 One 0 to 120V / 0 to 0.75A 90W - PLH250 One 0 to 250V / 0 to 0.375A 94W - PLH120-P One 0 to 120V / 0 to 0.75A 90W RS232/USB/LAN PLH250-P One 0 to 250V / 0 to 0.375A 94W RS232/USB/LAN Brief specifications for main outputs: Line & load regulation: <0.01%. Output noise: < 2mV rms. Meter accuracies: voltage - 0.1% ± 1digit, current - 0.3% ± 3 digits. Size: PLH - 105 x 130 x 290mm; PLH-P - 105 x 130 x 315mm The PLH series has been developed from the New PL series (see below) and retains all of its advanced features at output voltages of 120V or 250V. Linear regulation offers the highest possible performance, and the compact quarter-rack width design provides an impressive 90 watts of power. A low current range provides 0.01mA resolution. PLH-P series units have the same comprehensive set of interfaces as the PL-P (below), but with electrical isolation of the analog inputs. PLH & PLH-P series