PLG

PLG NICHICON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PLG Radial Lead Type, Higher Capacitance Specifications Temperature Characteristics (Max.Impedance Ratio) Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Tangent of loss angle (tan δ) ESR ( 1) Leakage Current ( 2) Performance CharacteristicsItem –55 to +105°C 2.5 to 16V 330 to 3900µF ± 20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Endurance Damp Heat (Steady State) Resistance to Soldering Heat Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. After soldering the capacitor under the soldering conditions prescribed here as preheat at 150 to 200°C for 60 to 180 seconds and peak temperature at 265°C for 10 seconds or less, the capacitor shall meet the specifications listed at right, provided that its temperature profile is measured at both of terminal ends facing the soldering side. Navy blue print on the case top Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence Compliant to the RoHS directive (2011/65/EU). 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. P L G G M C O Configuration Size code Capacitance tolerance (±20%) Rated capacitance (1200µF) Rated voltage (4V) Series name Type L+0.5MAX. 15MIN 4MIN φD±0.5 Resin coated Case φd L G 1 2 0 0 g 8 4 1 Capacitance Series Lot. No. Voltage(g:4V) P±0.5 Dimensions Type numbering system (Example : 4V 1200µF) Size φD L P φd φ8 × 9L 8.0 8.5 3.5 0.6 φ8 × 12L 8.0 11.5 3.5 0.6 φ10 × 13L 10.0 12.5 5.0 0.6 (mm) Dimension table in next page. PLG PLF Higher Capacitance Voltage V 2.5 4 6.3 10 16 Code e g j A C Please refer to page 20 about the end seal configuration. Frequency coefficient of rated ripple current

0 Frequency0/

120Hz 1kHz 10kHz 100kHz or more 0.05 0.30 0.70 1.00

CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PLG Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Rated ripple current (mArms) at 105°C 100kHz Dimensions 2.5 (0E) (1C) (1A) 6.3 (0J) (0G) 2.8 18.4 11.5 7.2 4.6 1800 2200 2700 3900 1200 1800 2700 820 1200 1500 1800 560 820 1200 330 470 820 900 1100 1350 1950 960 1440 2160 1033 1512 1890 2268 1120 1640 2400 1056 1504 2624 6000 6700 5560 7000 5900 6500 6900 5700 6100 6300 6600 5100 5800 6200 4700 5400 5600 PLG0E182MCO1 PLG0E222MDO1 PLG0E272MDO1 PLG0E392MDO1 PLG0G122MCO1 PLG0G182MDO1 PLG0G272MDO1 PLG0J821MCO1 PLG0J122MDO1 PLG0J152MDO1 PLG0J182MDO1 PLG1A561MCO1 PLG1A821MDO1 PLG1A122MDO1 PLG1C331MCO1 PLG1C471MDO1 PLG1C821MDO1 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 × 9 8 × 12 10 × 13 10 × 13 8 × 9 8 × 12 10 × 13 8 × 9 8 × 12 10 × 13 10 × 13 8 × 9 8 × 12 10 × 13 8 × 9 8 × 12 10 × 13 Rated Capacitance (µF) Rated Voltage (V) Code Surge Voltage (V) Leakage Current (µA) ESR (mΩ) (at 100kHz 20°C) Rated Ripple (mArms)tan δ Part NumberCase Size φD × L (mm)