PLED64S

PLED64S LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Revision: 10/15/18 ©2018 Littelfuse, Inc. Specifications are subject to change without notice. PLED Ultra Low Holding Current Series

Description

This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching electronic characteristics for an fluorescent tube replacement by an LED string. It helps to make the Fluorescent ballast and LED string compatible with each other. This ensures the ballast will be able to activate the LED string; especially for those ballast that need a high voltage output detection during ignition.The PLED ultra- low IH makes the LED driver widely used in the output of fluorescent tubes a compatible direct replacement for indoor and outdoor LED lighting strings. Electrical Characteristics (All parameters are measured at TA=25°C unless otherwise noted) Part Number Marking VBR Breakdown VDRM IH IS VT @ IT = 1 Amp IO

1 Critical rate of

Volts Volts mAmps mAmps Volts Amps Volts Min Max Min Max Max Max Max Min PLED64S PL64 58 71 56 21 800 2 1. 0 250V/µs PLED70S PL70 65 81 63 21 800 2 1. 0 250V/µs PLED90S PL90 75 90 73 21 800 2 1. 0 250V/µs PLED110S PL110 90 120 87 21 800 2 1. 0 250V/µs PLED130S PL130 120 149 116 21 800 2 1. 0 250V/µs PLED150S PL150 136 167 132 21 800 2 1. 0 250V/µs PLED180S PL180 170 203 165 21 800 2 1. 0 250V/µs PLED230S PL230 190 240 184 21 800 2 1. 0 250V/µs PLED260S PL260 220 2 74 213 21 800 2 1. 0 250V/µs PLED310S PL310 275 330 267 21 800 2 1. 0 250V/µs PLED350S PL350 320 380 310 21 800 2 1. 0 250V/µs PLED380S PL380 350 430 340 21 800 2 1. 0 250V/µs PLED450S2 PL450 410 495 397 21 800 2 1. 0 250V/µs PLED480S2 PL480 450 600 436 21 800 2 1. 0 250V/µs Features & Benefits

• Fast switching
• Automatically resets after power cycle
• Available in low profile, Standard DO-214AA packages
• IEC-61000-4-2 ESD 30kV (Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2 (IEC 801-2)
• Compatible with industrial lighting environments
• RoHS compliant and halogen-free RoHSPLED Ultra Low Holding Current Series Schematic Symbol Control Circuit note: 1. IO- Operation current tested @ aluminum boards, ambient temp 85°C 2. PLED450S and PLED480S are still under developed, please contact local sales representative for further information

Revision: 10/15/18 ©2018 Littelfuse, Inc. Specifications are subject to change without notice. PLED Ultra Low Holding Current Series Package Symbol Parameter Value Unit TJ Operating Junction Temperature Range -40 to +125 °C TS Storage Temperature Range -65 to +150 °C RθJA Thermal Resistance: Junction to Ambient 901 402 °C/W Thermal Considerations IH IT IS VDRMVT +V-V VBR V-I Characteristics 0.4 -40 -20 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Case Temperature (TC ) – ˚C fo oitaR iH iH T( C C˚ 52 =) 25 ˚C 0 20 40 60 80 100 120 140 160 -40 -20 Junction Temperature (TJ ) – ˚C reP fo tnecV BR – egnahC% 25 ˚C 0 20 40 60 80 100 120 140 160 VBR vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature Notes: 1) Standard FR-4 PCB with Copper Pads (Recommended Size) 2) Aluminum PCB Thickness: 1 .6mm Grade: 1-2 W/mK Thermal Conductivity Trace thickness: 2 oz Insulation layer thickness: 215 um Solder Pad Dimensions: 2.0mm x 2.8mm (Recommended Size) DO-214

Revision: 10/15/18 ©2018 Littelfuse, Inc. Specifications are subject to change without notice. PLED Ultra Low Holding Current Series Soldering Parameters Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max Do not exceed 260°C Physical Specifications Environmental Specifications T erminal Material Copper Alloy T erminal Finish 100% Matte Tin Plated Body Material UL Recognized compound meeting flammability rating V-0. Dimensions - DO-214 AA Package B D AC H G K F CASE TEMPERATURE MEASURING POINT 0.079" (2.0mm) 0.079" (2.0mm) 0.110" (2.8mm) E Recommended solder pad layout (Reference Only) Dimensions Inches Millimeters Min Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1 .95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1 .60 F 0.075 0.096 1 .90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1 .95 2.65 K 0.006 0.016 0.15 0.41 High T emperature Voltage Blocking MIL -STD-750: Method 1040, Condition A 80% min VDRM (VAC-peak), 125°C,1008 hours T emperature Cycling MIL -STD-750: Method 1051,-55°C to 150°C, 15-minute dwell,1000 cycles Biased T emperature & Humidity EIA/JEDEC: JESD22-A101 52VDC, 85°C, 85%RH, 1008 hours Thermal Shock MIL -STD-750: Method 1056 0°C to 100°C, 5-minute dwell, 10-second transfer, 10 cycles Resistance to Solder Heat MIL -STD-750: Method 2031 260°C, 10 seconds Moisture Sensitivity Level 85%RH, +85°C, 168 hours, 3 reflow cycles (+260°C peak). JEDEC-J-STD-020, Level 1

Revision: 10/15/18 ©2018 Littelfuse, Inc. Specifications are subject to change without notice. PLED Ultra Low Holding Current Series Part Marking System PLX XXXXX Part Numbering System Packaging Package Description Packaging Quantity Industry Standard S DO-214AA 2500 EIA-481-1 PLED 310 S TYPE PLED: LED Protector V PACKAGE TYPE S:DO-214AA BR See Electrical Characteristic table DO-214 Embossed Carrier Reel Pack (RP) Meets all EIA-481-1 Standards 0.47 (12.0) 0.315 (8.0) 0.157 (4.0) 0.49 (12.5) 0.80 (20.2) Arbor Hole Dia. 13.0 (330) Dimensions are in inches (and millimeters). Direction of Feed 0.059 DIA(1.5) Cover tape Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.