PLE NICHICON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PLE Radial Lead Type, Ultra-low ESR Specifications Temperature Characteristics (Max.Impedance Ratio) Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Tangent of loss angle (tan δ) ESR ( 1) Leakage Current ( 2) Performance CharacteristicsItem –55 to +105°C 2.5 to 6.3V 470 to 1500µF ± 20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Endurance Damp Heat (Steady State) Resistance to Soldering Heat The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. After soldering the capacitor under the soldering conditions prescribed here as preheat at 150 to 200°C for 60 to 180 seconds and peak temperature at 265°C for 10 seconds or less, the capacitor shall meet the specifications listed at right, provided that its temperature profile is measured at both of terminal ends facing the soldering side. Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value Ultra-low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence Compliant to the RoHS directive (2011/65/EU). P L E G M C O Configuration Capacitance tolerance (±20%) Rated capacitance (560µF) Rated voltage (4V) Series name Type Size code L+0.5MAX. 15MIN 4MIN φD±0.5 Resin coated Case φd L E 5 6 0 g 8 4 1 Capacitance Series Lot. No. Voltage(g:4V) P±0.5 Dimensions Type numbering system (Example : 4V 560µF) Dimension table in next page. PLELow ESRPLF Please refer to page 20 about the end seal configuration. Voltage V 2.5 4 6.3 Code e g j Size φD L P φd φ8 × 9L 8.0 8.5 3.5 0.6 φ8 × 12L 8.0 11.5 3.5 0.6 φ10 × 13L 10.0 12.5 5.0 0.6 (mm) Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. Frequency coefficient of rated ripple current
0 Frequency0/
120Hz 1kHz 10kHz 100kHz or more 0.05 0.30 0.70 1.00
CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PLE Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Rated ripple current (mArms) at 105°C 100kHz Dimensions 2.5 (0E) 2.8 6.3 (0J) 7.2 (0G) 4.6 560 820 820 1000 1500 560 680 820 1200 470 680 820 280 410 410 500 750 448 544 656 960 592 857 1033 6100 6300 6600 7100 7300 6000 6500 7000 7200 6400 6700 6800 PLE0E561MCO1 PLE0E821MCO6 PLE0E821MDO1 PLE0E102MDO1 PLE0E152MDO1 PLE0G561MCO1 PLE0G681MDO1 PLE0G821MDO1 PLE0G122MDO1 PLE0J471MDO1 PLE0J681MDO1 PLE0J821MDO1 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 × 9 8 × 9 8 × 12 10 × 13 10 × 13 8 × 9 8 × 12 10 × 13 10 × 13 8 × 12 10 × 13 10 × 13 Rated Capacitance (µF) Rated Voltage (V) Code Surge Voltage (V) Leakage Current (µA) ESR (mΩ) (at 100kHz 20°C) Rated Ripple (mArms)tan δ Part NumberCase Size φD × L (mm) : In this case, 6 will be put at 12th digit of type numbering system. No marked, 1 will be put at 12th digit of type numbering system.