PLC496_07 PROTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
ULTRA LOW CAPACITANCE TVS ARRAY 105109.R7 2/07 www.protekdevices.com
APPLICATIONS
✔ Sensor & Control Circuits ✔ FireWire ✔ Ethernet - 10/100/1000 Base T ✔ Handheld Electronics ✔ RF Applications IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Ground) & Level 3(Line-Line)
FEATURES
✔ 500 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Bidirectional Configuration ✔ ESD Protection > 40 kilovolts ✔ Low Clamping Voltage < 5 Volts ✔ Ultra Low Capacitance: 1.25pF ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Weight 70 milligrams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin One Defined by Dot on Top of Package 05109 PIN CONFIGURATION SO-8 /MT49 /MT50 /MT52 /MT56 /MT51 /MT53/MT54/MT55
305109.R7 2/07 www.protekdevices.com GRAPHS 0 25 50 75 100 125 150 TL - Lead Temperature - °C 100 % Of Rated Power Peak Pulse Power 8/20µs Average Power FIGURE 3 POWER DERATING CURVE FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR PLC496 ESD Test Pulse: 25 kilovolt, 1/30ns (waveshape)
5 Volts per Division
505109.R7 2/07 www.protekdevices.com SO-8 PACKAGE OUTLINE & DIMENSIONS Outline & Dimensions: Rev 1 - 11/01, 06009 TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., PLC496-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PLC496-LF-T7. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. A B C D F G J K P R 4.80 3.80 1.35 0.35 0.40
1.27 BSC
0.18 0.10 5.80 0.25 5.00 4.00 1.75 0.49 1.250 0.25 0.25 6.20 0.50 0.189 0.150 0.054 0.014 0.016
0.05 BSC
0.007 0.004 0.229 0.010 0.196 0.157 0.068 0.019 0.049 0.009 0.008 0.244 0.019 DIM MIN MAX MIN MAX MILLIMETERS INCHES PACKAGE DIMENSIONS NOTES 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusion. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. /MT45/MT65/MT45 /MT56/MT53 /MT49 /MT52 /MT45/MT66/MT32/MT45/MT80 /MT71 /MT68 /MT45/MT84/MT45 /MT67 /MT75 /MT74 /MT82/MT32/MT120/MT32/MT52/MT53/MT176 /MT48/MT176/MT32/MT45/MT32/MT49/MT48/MT176 /MT70 /MT52/MT32/MT80/MT76 /MT48/MT46/MT48/MT49/MT48/MT148/MT32/MT40/MT48/MT46/MT50/MT53/MT32/MT77/MT77/MT41/MT77/MT77/MT66/MT43 /MT56/MT32/MT80/MT76 /MT48/MT46/MT48/MT49/MT48/MT148/MT32/MT40/MT48/MT46/MT50/MT53/MT32/MT77/MT77/MT41/MT77 /MT83/MT66/MT43 /MT83/MT65/MT84 PACKAGE OUTLINE SO-8 /MT48/MT46/MT48/MT53/MT48/MT32/MT177/MT32/MT48/MT46/MT48/MT48/MT53/MT148 /MT48/MT46/MT48/MT51/MT48/MT32/MT177/MT32/MT48/MT46/MT48/MT48/MT53/MT148 /MT48/MT46/MT50/MT52/MT53/MT148/MT32/MT77/MT73/MT78/MT48/MT46/MT49/MT54/MT48/MT32/MT177/MT32/MT48/MT46/MT48/MT48/MT53/MT148 /MT48/MT46/MT48/MT52/MT53/MT32/MT177/MT32/MT48/MT46/MT48/MT48/MT53/MT148 MOUNTING PAD COPYRIGHT © ProT ek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the s election or specifications of such products. ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com