PLAD30KP10 MICROSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

30kW Surface Mount Transient Voltage Suppressor WWW.Microsemi .COM SCOTTSDALE DIVISION PLAD30KP10 thru PLAD30KP400CA, e3 PLAD30KP10 thru 400CA, e3 DESCRIPTION APPEARANCE These Microsemi 30 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltage- sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and class levels with various source impedances described herein. This series is available in 10 to 400 volt Standoff Voltages (V WM) in both unidirectional and bi-directional with either 5% or 10% tolerances of the Breakdown Voltage (V BR). Microsemi also offers numerous other TVS products to meet higher or lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS

  • Available in both Unidirectional and Bidirectional construction (Bidirectional with C or CA suffix)
  • Selections for 10 to 400 volt Standoff Voltages V WM
  • Suppresses transients up to 30 kW @ 10/1000 µs and 200 kW @ 8/20 µs (see Figure 1)
  • Fast response
  • Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55oC to +125oC (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in the operating direction for unidirectional or both directions for bidirectional)
  • Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, and JANTXV are available by adding MQ, MX, or MV prefixes respectively to part numbers.
  • Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
  • RoHS Compliant devices available by adding an “e3” suffix
  • Protection from switching transients and induced RF
  • Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4
  • Secondary lightning protection per IEC61000-4-5 with

42 Ohms source impedance:

Class 1,2,3,4: PLAD30KP10 - PLAD30KP400A or CA Class 5: PLAD30KP10 - PLAD30KP400A or CA (short distance) Class 5: PLAD30KP10 - PLAD30KP220A or CA (long distance)

  • Secondary lightning protection per IEC61000-4-5 with

12 Ohms source impedance:

Class 1,2, 3: PLAD30KP10 to PLAD30KP400A or CA Class 4: PLAD30KP10 to PLAD30KP220A or CA

  • Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: PLAD30KP10 to PLAD30KP400A or CA Class 3: PLAD30KP10 to PLAD30KP220A or CA Class 4: PLAD30KP10 to PLAD30KP110A or CA MAXIMUM RATINGS MECHANICAL AND PACKAGING
  • Peak Pulse Power dissipation at 25 ºC: 30,000 watts at 10/1000 μs (also see Figures 1 and 2)
  • Impulse repetition rate (duty factor): 0.05%
  • t clamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional
  • Operating & Storage temperature: -65ºC to +150ºC
  • Thermal resistance: 0.5 ºC/W junction to case, or 50ºC/W junction to ambient when mounted on FR4 PC board with recommended mounting pad with 1 oz Cu (see last page)
  • Steady-State Power dissipation: 250 watts at T c = 25oC, or 2.5 watts at TA = 25ºC when mounted on FR4 PC board as described for thermal resistance above
  • Forward Surge: 1500 Amps (theoretical) at 8.3 ms half- sine wave for unidirectional devices only
  • Solder temperatures: 260 ºC for 10 s (maximum)
  • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0
  • FINISH: Tin-Lead or RoHS Compliant annealed matte-Tin plating readily solderable per MIL- STD-750, method 2026
  • MARKING: Body marked with part number
  • POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom)
  • WEIGHT: 1.7-2.0 grams (approximate)
  • TAPE & REEL option: Standard per EIA-296 for axial package (add “TR” suffix to part number)
  • See package dimension on last page Microsemi Scottsdale Division Page 1Copyright © 2007 9-12-2007 Rev G 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

30kW Surface Mount Transient Voltage Suppressor WWW.Microsemi .COM SCOTTSDALE DIVISION PLAD30KP10 thru PLAD30KP400CA, e3 PLAD30KP10 thru 400CA, e3

ELECTRICAL CHARACTERISTICS

(Note 2) REVERSE STAND-OFF VOLTAGE VWM (Note 1) VOLTS BREAKDOWN VOLTAGE V(BR) V (BR) @ I (BR) VOLTS mA MAXIMUM CLAMPING VOLTAGE VC @ IPP VOLTS MAXIMUM STANDBY CURRENT I D @ VWM μA MAXIMUM PEAK PULSE CURRENT I PP (FIG. 3) A MAXIMUM TEMPERATURE COEFFICIENT OF V (BR) αV(BR) mV/ ºC PLAD30KP10 PLAD30KP10A PLAD30KP11 PLAD30P11A 12.8– 14.6 12.8– 14.0 13.0 – 15.5 13.0 – 14.5 150 150 150 150 19.2 18.4 22.4 19.2 15,000 15,000 15,000 15,000 1560 1629 1490 1560 8.0 8.0 8.0 8.0 PLAD30KP12 PLAD30KP12A PLAD30KP13 PLAD30KP13A 13.3 – 16.3 13.3 – 14.7 14.4 – 17.6 14.4 – 15.9 150 150 150 150 22.8 20.6 24.6 22.4 15,000 15,000 6000 6000 1317 1455 1221 1341 8.0 8.0 8.0 8.0 PLAD30KP14 PLAD30KP14A PLAD30KP15 PLAD30KP15A 15.6 – 19.1 15.6 – 17.2 16.7 – 20.4 16.7 – 18.5 150 150 26.6 24.0 28.6 25.8 3000 3000 750 750 1134 1251 1350 1164 PLAD30KP16 PLAD30KP16A PLAD30KP17 PLAD30KP17A 17.8 – 21.8 17.8 – 19.7 18.9 – 23.1 18.9 – 20.9 30.0 27.2 31.8 28.8 450 450 150 150 999 1101 942 1041 PLAD30KP18 PLAD30KP18A PLAD30KP20 PLAD30KP20A 20.0 – 24.4 20.0 – 22.1 22.2 – 27.1 22.2 – 24.5 33.8 30.8 37.6 34.0 120 885 975 798 882 PLAD30KP22 PLAD30KP22A PLAD30KP24 PLAD30KP24A 24.4 – 29.8 24.4 – 26.9 26.7 – 32.6 26.7 – 29.5 40.2 36.4 44.0 39.8 747 822 681 753 PLAD30KP26 PLAD30KP26A PLAD30KP28 PLAD30KP28A 28.9 – 35.3 28.9 – 31.9 31.1 – 38.0 31.1 – 34.4 47.6 43.0 51.6 46.4 630 696 582 645 PLAD30KP30 PLAD30KP30A PLAD30KP33 PLAD30KP33A 33.3 – 40.7 33.3 – 36.8 36.7 – 44.9 36.7 – 40.6 53.8 48.8 59.0 53.3 564 618 510 564 PLAD30KP36 PLAD30KP36A PLAD30KP40 PLAD30KP40A 40.0 – 48.9 40.0 – 44.2 44.4 – 54.3 44.4 – 49.1 64.3 58.1 71.4 64.5 468 516 420 468 PLAD30KP43 PLAD30KP43A PLAD30KP45 PLAD30KP45A 47.8 – 58.4 47.8 – 52.8 50.0 – 61.1 50.0 – 55.3 76.7 69.4 80.3 72.7 390 432 372 414 PLAD30KP48 PLAD30KP48A PLAD30KP51 PLAD30KP51A 53.3 – 65.1 53.3 – 58.9 56.7 – 69.3 56.7 – 62.7 85.5 77.4 91.1 82.4 348 390 330 366 PLAD30KP54 PLAD30KP54A PLAD30KP58 PLAD30KP58A 60.0 – 73.3 60.0 – 66.3 64.4 – 78.7 64.4 – 71.2 96.3 87.1 103.0 93.6 312 342 294 318 PLAD30KP60 PLAD30KP60A PLAD30KP64 PLAD30KP64A 66.7 – 81.5 66.7 – 73.7 71.1 – 86.9 71.1 – 78.6 107.0 96.8 114.0 103.0 282 312 264 294 Microsemi Scottsdale Division Page 2Copyright © 2007 9-12-2007 Rev G 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

30kW Surface Mount Transient Voltage Suppressor WWW.Microsemi .COM SCOTTSDALE DIVISION PLAD30KP10 thru PLAD30KP400CA, e3 PLAD30KP10 thru 400CA, e3 MICROSEMI PART NUMBER (Note 2) REVERSE STAND- OFF VOLTAGE VWM (Note 1) VOLTS BREAKDOWN VOLTAGE V(BR) V (BR) @ I (BR) VOLTS mA MAXIMUM CLAMPING VOLTAGE VC @ IPP VOLTS MAXIMUM STANDBY CURRENT I D @ VWM μA MAXIMUM PEAK PULSE CURRENT I PP (FIG. 3) A MAXIMUM TEMPERATURE COEFFICIENT OF V(BR) αV(BR) mV/ ºC PLAD30KP70 PLAD30KP70A PLAD30KP75 PLAD30KP75A 77.8 – 95.1 77.8 – 86.0 83.3 – 102.0 83.3 – 92.1 125 113 134 121 240 264 222 246 100 PLAD30KP78 PLAD30KP78A PLAD30KP85 PLAD30KP85A 86.7 – 106.0 86.7 – 95.8 94.4 – 115.0 94.4 – 104.0 139 126 151 137 216 240 198 216 104 115 104 PLAD30KP90 PLAD30KP90A PLAD30KP100 PLAD30KP100A 100 100 100 – 122 100 – 111 111 – 136 111 – 123 160 146 179 162 186 204 168 186 120 109 134 122 PLAD30KP110 PLAD30KP110A PLAD30KP120 PLAD30KP120A 110 110 120 120 122 – 149 122 – 135 133 – 163 133 – 147 196 177 214 193 156 168 140 156 147 132 161 145 PLAD30KP130 PLAD30KP130A PLAD30KP150 PLAD30KP150A 130 130 150 150 144 – 176 144 – 159 167 – 204 167 – 185 231 209 268 243 130 142 112 124 174 157 202 183 PLAD30KP160 PLAD30KP160A PLAD30KP170 PLAD30KP170A 160 160 170 170 178 – 218 178 – 197 189 – 231 189 – 209 287 259 304 275 104 116 110 216 195 229 207 PLAD30KP180 PLAD30KP180A PLAD30KP200 PLAD30KP200A 180 180 200 200 200 – 244 200 – 221 222 – 271 222 – 245 321 291 356 322 104 242 219 269 243 PLAD30KP220 PLAD30KP220A PLAD30KP250 PLAD30KP260A 220 220 250 260 245 – 299 245 – 271 278 – 308 289 – 320 293 356 403 419 297 269 306 318 PLAD30KP280A PLAD30KP300A PLAD30KP350A PLAD30KP400A 280 300 350 400 311 – 345 333 – 369 389 – 431 444 - 492 451 483 564 644 344 368 430 490 NOTE 1: Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” VWM which should be equal to or greater than the dc or continuous peak operating voltage level. NOTE 2: For bidirectional construction, indicate a C or CA suffix after the part number. SYMBOLS & DEFINITIONS Symbol Definition Symbol Definition VWM Working Peak (Standoff) Voltage IPP Peak Pulse Current PPP Peak Pulse Power VC Clamping Voltage V(BR) Breakdown Voltage I(BR) Breakdown Current for V(BR) ID Standby Current Microsemi Scottsdale Division Page 3Copyright © 2007 9-12-2007 Rev G 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

30kW Surface Mount Transient Voltage Suppressor WWW.Microsemi .COM SCOTTSDALE DIVISION PLAD30KP10 thru PLAD30KP400CA, e3 PLAD30KP10 thru 400CA, e3 PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm] Microsemi Scottsdale Division Page 5Copyright © 2007 9-12-2007 Rev G 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503