PLA10BS1522R0A2M

C09E MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 24

Technical content

Datasheet sections

Cat.No.C09E-11 Murata Manufacturing Co., Ltd. EMI Suppression Filters (EMIFILr) for AC Power Lines

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numberingo Part Numbering (Part Number) AC Line Filters eApplications Code for AC Line

Applications

A B qProduct ID PL Common Mode Choke Coils Product ID wType A H Y AC Standard Type AC High-frequency Type AC Hybrid Choke Coils Type Code Type !0Packaging B M All series Bulk Magazine Package Code Packaging Series iWinding Mode A B D R P Parallel Winding Type Parallel Winding Type (High Performance Type) Sectional Winding Type Standard Type Single Layer Winding Type Code Winding Mode uRated Current Expressed by three figures. The unit is in amperes (A). A decimal point is expressed by the capital letter "R ". In this case, all figures are significant digits. oLead Dimensions 2 3.5mm Code Lead Dimensions rStructure Code Safety Recognized General Use

Features

S N tFeatures yInductance Expressed by three figures. The unit is micro-henry (µH). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R ". In this case, all figures are significant digits. If inductance is less than 0.1 µH, the inductance code is expressed by a combination of two figures and capital letter "N ", and the unit of inductance is nano-henry (nH). The capital letter "N " indicates the unit of "nH", and also expresses a decimal point. In this case, all figures are significant digits. y 152 t S u 2R0 q PL r A e w A i R o B

• Please contact us for FKOB series.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI (Electro Magnetic Interference) suppression filter for AC power lines eliminate noise entering equipment from commercial power lines or noise generated from electronic equipment. Common mode chokes, line bypass capacitors, across the line capacitors are generally used as AC EMI suppression filter device. In suppressing common mode noise, common mode chokes are most important devices. Because the characteristics of common mode chokes influences performance of total filter block MURATA provides two types of common mode chokes. (Standard type, High frequency type) Hybrid choke coil is high performance EMI suppression device which can suppress both common mode noise and differential mode noise at the same time. It is effective in AC power supplies with active device for higher harmonic countermeasure, which tend to emit relatively higher differential mode noise. n Classification of EMI Suppression Filter for AC Power Lines Product Name Common Mode Choke Coil Standard Type Suppression of general common mode noise Suppression of common mode noise contains high frequency noise above 10MHz Suppression of conduction noise in AC power line with active device for higher harmonic countermeasure. Suppression of AC power line noise which contains both common mode noise and differential mode noise. PLA10 PLH10 PLY10 High Frequency Type Hybrid Choke Coil Hybrid Choke Coil Appearance Effective Frequency Range (Hz) 10k 100k 1M 10M 100M 1G Application Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines For AC power supply, AC adaptor. Set for low profile equipment. FKOB PLY17
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. O utline of EM I Suppression Filter (EM IFILr) for A C Pow er Lines n Common Mode Choke Coil Standard Winding and Sectional Winding n Noise Measures for Switching Power Supply Standard W inding Sectional W inding End of W inding End of W inding Beginning of W inding H igh-frequency noise can pass through the Filter easily because both edges of coils are close as show n above Beginning of W inding H igh-frequency noise can hardly pass through the Filter because both edges of coil are not close as show n above Standard W inding Large inductance is available → H ighly Efficient in Low Frequency Sectional W inding Excellent perform ance in high frequency Stray capacity betw een w indings is low Frequency (M H z) Insertion Loss (dB) 0.1 1 10 100 0.01 (Standard W inding) (Sectional W inding) N oise are generated from Sw itching Pow er Supply C om m on M ode N oise D ifferential M ode N oise PLA 10/PLH 10 C om m on M ode C hoke C oil suppresses C om m on M ode N oise Across the Line C apacitor (X C apacitor) suppresses D ifferential M ode N oise Across the Line C apacitor (X C apacitor) suppresses D ifferential M ode N oise D ifferential M ode C hoke C oil suppresses D ifferential M ode N oise D ifferential M ode C hoke C oil suppresses D ifferential M ode N oise Line Bypass C apacitor (Y C apacitor) suppresses C om m on M ode N oise LoadSw itching Pow er Supply
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (EMIFILr) for AC Power Lines Common Mode Choke Coil FKOB Series The FKOB series is compact size AC common mode choke coil which uses troidal type ferrite core. Its broad band frequency characteristic enables simple filter composition in relative low noise equipments. 8–0.5 ø23 max. 10–0.5 10–2 17 max. (in mm) FKOB160MH02/25/23/26/24 ø23 max. 4.5–1 17 max. 10–0.5 13–0.5 (in mm) FKOB160MH06/13/14/16/15 Part Number Common Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) FKOB160MH02 250 2.5 250 100 FKOB160MH06 250 2.5 250 100 FKOB160MH13 600 2.5 250 100 FKOB160MH25 600 2.5 250 100 FKOB160MH14 800 2.5 250 100 FKOB160MH23 800 2.5 250 100 FKOB160MH16 1000 1.5 250 100 FKOB160MH26 1000 1.5 250 100 FKOB160MH15 1500 1.5 250 100 FKOB160MH24 1500 1.5 250 100 Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -20°C to 95°C Winding Temperature Rise (at Rated Current) (max.): 35K n Equivalent Circuit Diagram (1) (4) (2) (3) N1 : N2 = 1 : 1 n Insertion Loss-Frequency Characteristics 70 0.1 0.5 1 5 10 50 100 16, 26 15, 24 02, 06 13, 14, 23, 25 Frequency (MHz) Insertion Loss (dB)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. The PLA10 series is a com pact size AC com m on m ode choke coil. It can obtain a high inductance value in spite of its com pact size. n Features 1. C om pact and light w eight 2. Low profile in vertical core layout 3. Both a standard w inding type and a sectional w inding type for higher frequency noise are available. (in m m ) 17.5 m ax. 18 m ax. 13–0.5 10–0.5 16 m ax. ø0.9 m ax. 3.5–1 (1) [(2)] (4) [(3)] (4) [(1)] (3) [(2)] Standard Winding Type (in m m ) 17.5 m ax. 16 m ax.18 m ax. 13–0.5 10–0.5 ø0.9 m ax. 3.5–1 (1) (4) [(2)] (4) [(1)] (3) [(2)][(3)] Sectional Winding Type PLA 10 Series Part Number Common Mode Inductance (min.) (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLA 10A N 1522R 0R 2 1.5 2.0 300 100 PLA 10A N 1821R 7R 2 1.8 1.7 300 100 PLA 10A N 2221R 5R 2 2.2 1.5 300 100 PLA 10A N 3021R 3R 2 3.0 1.3 300 100 PLA 10A N 3521R 2R 2 3.5 1.2 300 100 PLA 10A N 5521R 0R 2 5.5 1.0 300 100 PLA 10A N 7420R 8R 2 7.4 0.8 300 100 PLA 10A N 1030R 7R 2 10.0 0.7 300 100 PLA 10A N 1230R 6R 2 12.0 0.6 300 100 PLA 10A N 2030R 5R 2 20.0 0.5 300 100 PLA 10A N 3030R 4R 2 30.0 0.4 300 100 PLA 10A N 4330R 3R 2 43.0 0.3 300 100 O perating Tem perature R ange (Am bient Tem perature R ange + W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K Part Number Common Mode Inductance (min.) (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLA 10A N 9012R 0D 2 0.9 2.0 300 100 PLA 10A N 1321R 7D 2 1.3 1.7 300 100 PLA 10A N 1821R 5D 2 1.8 1.5 300 100 PLA 10A N 2021R 3D 2 2.0 1.3 300 100 PLA 10A N 3621R 0D 2 3.6 1.0 300 100 PLA 10A N 7720R 7D 2 7.7 0.7 300 100 PLA 10A N 1330R 5D 2 13.0 0.5 300 100 PLA 10A N 2230R 4D 2 22.0 0.4 300 100 PLA 10A N 3630R 3D 2 36.0 0.3 300 100 O perating Tem perature R ange (Am bient Tem perature R ange + W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K o Standard W inding Type o Sectional W inding Type
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Equivalent Circuit Diagram (1) (4) (2) (3) N 1 N 2 N 1 : N 2 = 1 : 1 n Insertion Loss-Frequency Characteristics Standard Winding Type 0.1 1 10 100 0.01 Frequency (M H z) PLA10AN 1522R 0R 2 PLA10AN 1821R 7R 2 PLA10AN 2221R 5R 2 PLA10AN 3021R 3R 2 PLA10AN 3521R 2R 2 PLA10AN 5521R 0R 2 Insertion Loss (dB) PLA10AN 7420R 8R 2 PLA10AN 1030R 7R 2 PLA10AN 1230R 6R 2 PLA10AN 2030R 5R 2 PLA10AN 3030R 4R 2 PLA10AN 4330R 3R 2 Sectional Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLA10AN 9012R 0D 2 PLA10AN 1321R 7D 2 PLA10AN 1821R 5D 2 PLA10AN 2021R 3D 2 PLA10AN 3621R 0D 2 PLA10AN 7720R 7D 2 PLA10AN 1330R 5D 2 PLA10AN 2230R 4D 2 PLA10AN 3630R 3D 2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. (in m m ) 17.5 m ax. 18 m ax. 13–0.5 10–0.5 16 m ax. ø0.9 m ax. 3.5–1 (1) [(2)] (4) [(3)] (4) [(1)] (3) [(2)] Standard Winding Type (in m m ) 17.5 m ax. 16 m ax.18 m ax. 13–0.5 10–0.5 ø0.9 m ax. 3.5–1 (1) (4) [(2)] (4) [(1)] (3) [(2)][(3)] Sectional Winding Type PLA 10 Series (Safety Standard R ecognized) Part Number Common Mode Inductance (min.) (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLA 10A S1522R 0R 2 1.5 2.0 250 100 PLA 10A S1821R 7R 2 1.8 1.7 250 100 PLA 10A S2221R 5R 2 2.2 1.5 250 100 PLA 10A S3021R 3R 2 3.0 1.3 250 100 PLA 10A S3521R 2R 2 3.5 1.2 250 100 PLA 10A S5521R 0R 2 5.5 1.0 250 100 PLA 10A S7420R 8R 2 7.4 0.8 250 100 PLA 10A S1030R 7R 2 10.0 0.7 250 100 PLA 10A S1230R 6R 2 12.0 0.6 250 100 PLA 10A S2030R 5R 2 20.0 0.5 250 100 PLA 10A S3030R 4R 2 30.0 0.4 250 100 PLA 10A S4330R 3R 2 43.0 0.3 250 100 O perating Tem perature R ange : -25°C to 60°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K Part Number Common Mode Inductance (min.) (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLA 10A S9012R 0D 2 0.9 2.0 250 100 PLA 10A S1321R 7D 2 1.3 1.7 250 100 PLA 10A S1821R 5D 2 1.8 1.5 250 100 PLA 10A S2021R 3D 2 2.0 1.3 250 100 PLA 10A S3621R 0D 2 3.6 1.0 250 100 PLA 10A S7720R 7D 2 7.7 0.7 250 100 PLA 10A S1330R 5D 2 13.0 0.5 250 100 PLA 10A S2230R 4D 2 22.0 0.4 250 100 PLA 10A S3630R 3D 2 36.0 0.3 250 100 O perating Tem perature R ange : -25°C to 60°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K o Standard W inding Type o Sectional W inding Type n Features 1. C om pact and light w eight 2. Low profile in vertical core layout 3. Both a standard w inding type and a sectional w inding type for higher frequency noise are available. 4. Safety standards: EN 60065 n Applications N oise suppression of AC pow er lines
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Equivalent Circuit Diagram (1) (4) (2) (3) N 1 N 2 N 1 : N 2 = 1 : 1 n Insertion Loss-Frequency Characteristics Standard Winding Type 0.1 1 10 100 0.01 Frequency (M H z) PLA10AS1522R 0R 2 PLA10AS1821R 7R 2 PLA10AS2221R 5R 2 PLA10AS3021R 3R 2 PLA10AS3521R 2R 2 PLA10AS5521R 0R 2 Insertion Loss (dB) PLA10AS7420R 8R 2 PLA10AS1030R 7R 2 PLA10AS1230R 6R 2 PLA10AS2030R 5R 2 PLA10AS3030R 4R 2 PLA10AS4330R 3R 2 Sectional Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLA10AS9012R 0D 2 PLA10AS1321R 7D 2 PLA10AS1821R 5D 2 PLA10AS2021R 3D 2 PLA10AS3621R 0D 2 PLA10AS7720R 7D 2 PLA10AS1330R 5D 2 PLA10AS2230R 4D 2 PLA10AS3630R 3D 2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PLH 10 Series The PLH 10 series is a com m on m ode choke coil for high frequency use. The sam e dim ensions as the PLA10 series enables flexible design. n Features 1. H igh perform ance in high frequency range 2. Low profile in vertical core layout 3. C om pact and light w eight 17.5 m ax. 18 m ax. 13–0.5 (in m m ) 10–0.5 16 m ax. ø0.9 m ax. 3.5–1 (4) [(1)] (3) [(2)] (4) [(3)] (1) [(2)] Part Number Common Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLH 10A N 7003R 6P2 70 3.6 300 100 PLH 10A N 1112R 6P2 110 2.6 300 100 PLH 10A N 1612R 1P2 160 2.1 300 100 PLH 10A N 2211R 5P2 220 1.5 300 100 PLH 10A N 2911R 2P2 290 1.2 300 100 PLH 10A N 3711R 0P2 370 1.0 300 100 O perating Tem perature R ange (Am bient Tem perature R ange + W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K n Equivalent Circuit Diagram (1) (4) (2) (3) N 1 N 2 N 1 : N 2 = 1 : 1 n Insertion Loss-Frequency Characteristics Insertion Loss (dB) Frequency (M H z) 0.1 1.0 10 1000 100 PLH 10AN 1112R 6P2 PLH 10AN 1612R 1P2 PLH 10AN 2211R 5P2 PLH 10AN 2911R 2P2 PLH 10AN 3711R 0P2 PLH 10AN 7003R 6P2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PLH 10 Series (Safety Standard R ecognized) n Features 1. H igh perform ance in high frequency range 2. Low profile in vertical core layout 3. C om pact and light w eight 4. Safety standards: EN 60065 n Applications Suppressing radiation noise in sw itching pow er supply and inverter (AC -AC converter) 17.5 m ax. 18 m ax. 13–0.5 (in m m ) 10–0.5 16 m ax. ø0.9 m ax. 3.5–1 (4) [(1)] (3) [(2)] (4) [(3)] (1) [(2)] Part Number Common Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLH 10A S7003R 6P2 70 3.6 250 100 PLH 10A S1112R 6P2 110 2.6 250 100 PLH 10A S1612R 1P2 160 2.1 250 100 PLH 10A S2211R 5P2 220 1.5 250 100 PLH 10A S2911R 2P2 290 1.2 250 100 PLH 10A S3711R 0P2 370 1.0 250 100 O perating Tem perature R ange : -25°C to 60°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K n Equivalent Circuit Diagram (1) (4) (2) (3) N 1 N 2 N 1 : N 2 = 1 : 1 n Insertion Loss-Frequency Characteristics Insertion Loss (dB) Frequency (M H z) 0.1 1.0 10 1000 100 PLH 10AS1112R 6P2 PLH 10AS1612R 1P2 PLH 10AS2211R 5P2 PLH 10AS2911R 2P2 PLH 10AS3711R 0P2 PLH 10AS7003R 6P2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (EMIFILr) for AC Power Lines H ybrid C hoke C oil The PLY10 is a com pact and high perform ance hybrid choke coil w hich can handle differential m ode noise caused by the harm onics currents regulation circuit as w ell as com m on m ode noise. It can handle noise problem s m uch m ore com pactly than a com bination of a conventional com m on m ode choke coil and a differential m ode choke coil. n Features 1. PLY10 has both functions of a com m on m ode choke coil and a differential m ode choke coil in its com pact body. 2. Low profile in vertical core layout 3. PLY10 has the sam e pin layout as a general type com m on m ode choke coil w hich enables it to replace conventional com ponents. 4. Both a standard w inding type and a sectional w inding type for higher frequency noise are available. n EMI Problem for harmonics currents regulation There are som e m ethods m eet harm onics currents regulations (IEC 1000-3, EN 60555-2) such as an active filter type and one converter type. H ow ever, they cause new EM I problem s of differential m ode noise because they use active com ponents. For that reason, additional filter com ponents to m eet differential m ode noise m ust be applied. 17.5 m ax. 18 m ax. 13±0.5 10±0.5 16 m ax. ø0.9 m ax. (in m m ) 3.5±1 (4) [(1)] (3) [(2)] (4) [(3)] (1) [(2)] Standard Winding Type 17.5 m ax. 18 m ax. 13±0.5 10±0.5 (in m m ) 16 m ax. ø0.9 m ax. 3.5±1 (4) [(1)] (3) [(2)] (4) [(3)] (1) [(2)] Sectional Winding Type PLY10 Series Part Number Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY10A N 9012R 0R 2 0.9 65 2.0 300 PLY10A N 1121R 8R 2 1.1 90 1.8 300 PLY10A N 1521R 6R 2 1.5 110 1.6 300 PLY10A N 2121R 4R 2 2.1 150 1.4 300 PLY10A N 2821R 2R 2 2.8 190 1.2 300 PLY10A N 4321R 0R 2 4.3 300 1.0 300 PLY10A N 6220R 8R 2 6.2 400 0.8 300 PLY10A N 8720R 7R 2 8.7 530 0.7 300 PLY10A N 9920R 6R 2 9.9 690 0.6 300 PLY10A N 1430R 5R 2 14.0 1000 0.5 300 O perating Tem perature (Am bient Tem perature R ange+W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K Part Number Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY10A N 7012R 0D 2 0.7 50 2.0 300 PLY10A N 1121R 7D 2 1.1 65 1.7 300 PLY10A N 1421R 4D 2 1.4 110 1.4 300 Continued on the following page. o Standard W inding Type o Sectional W inding Type
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Part Number Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) Continued from the preceding page. PLY10A N 2321R 2D 2 2.3 160 1.2 300 PLY10A N 3521R 0D 2 3.5 240 1.0 300 PLY10A N 4420R 8D 2 4.4 320 0.8 300 PLY10A N 8720R 7D 2 8.7 500 0.7 300 PLY10A N 9720R 6D 2 9.7 670 0.6 300 PLY10A N 1130R 5D 2 11.0 840 0.5 300 PLY10A N 2430R 4D 2 24.0 1800 0.4 300 O perating Tem perature (Am bient Tem perature R ange+W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K n Equivalent Circuit Diagram C om m on M ode Inductor D ifferential M ode Inductor (1) (2) (3)(4) n Common Mode Insertion Loss-Frequency Characteristics Standard Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY10AN 9012R 0R 2 PLY10AN 1121R 8R 2 PLY10AN 1521R 6R 2 PLY10AN 2121R 4R 2 PLY10AN 2821R 2R 2 PLY10AN 4321R 0R 2 PLY10AN 6220R 8R 2 PLY10AN 8720R 7R 2 PLY10AN 9920R 6R 2 PLY10AN 1430R 5R 2 Sectional Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY10AN 4420R 8D 2 PLY10AN 8720R 7D 2 PLY10AN 9720R 6D 2 PLY10AN 1130R 5D 2 PLY10AN 2430R 4D 2 PLY10AN 7012R 0D 2 PLY10AN 1121R 7D 2 PLY10AN 1421R 4D 2 PLY10AN 2321R 2D 2 PLY10AN 3521R 0D 2 n Differential Mode Insertion Loss-Frequency Characteristics Standard Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY10AN 2121R 4R 2 PLY10AN 2821R 2R 2 PLY10AN 4321R 0R 2 PLY10AN 6220R 8R 2 PLY10AN 8720R 7R 2 PLY10AN 9920R 6R 2 PLY10AN 1430R 5R 2 PLY10AN 9012R 0R 2 PLY10AN 1121R 8R 2 PLY10AN 1521R 6R 2 Sectional Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY10AN 7012R 0D 2 PLY10AN 1121R 7D 2 PLY10AN 1421R 4D 2 PLY10AN 2321R 2D 2 PLY10AN 3521R 0D 2 PLY10AN 4420R 8D 2 PLY10AN 8720R 7D 2 PLY10AN 9720R 6D 2 PLY10AN 1130R 5D 2 PLY10AN 2430R 4D 2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. The PLY10 is a com pact and high perform ance hybrid choke coil w hich can handle differential m ode noise caused by the harm onics currents regulation circuit as w ell as com m on m ode noise. It can handle noise problem s m uch m ore com pactly than a com bination of a conventional com m on m ode choke coil and a differential m ode choke coil. n Features 1. PLY10 has both functions of a com m on m ode choke coil and a differential m ode choke coil in its com pact body. 2. Low profile in vertical core layout 3. PLY10 has the sam e pin layout as a general type com m on m ode choke coil w hich enables it to replace conventional com ponents. 4. Safety standards: EN 60065 n EMI Problem for harmonics currents regulation There are som e m ethods m eet harm onics currents regulations (IEC 1000-3, EN 60555-2) such as an active filter type and one converter type. H ow ever, they cause new EM I problem s of differential m ode noise because they use active com ponents. For that reason, additional filter com ponents to m eet differential m ode noise m ust be applied. 17.5 m ax. 18 m ax. 13±0.5 10±0.5 16 m ax. ø0.9 m ax. (in m m ) 3.5±1 (4) [(1)] (3) [(2)] (4) [(3)] (1) [(2)] Standard Winding Type 17.5 m ax. 18 m ax. 13±0.5 10±0.5 (in m m ) 16 m ax. ø0.9 m ax. 3.5±1 (4) [(1)] (3) [(2)] (4) [(3)] (1) [(2)] Sectional Winding Type PLY10 Series (Safey Standard R ecognized) Part Number Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY10A S9012R 0R 2 0.9 65 2.0 300 PLY10A S1121R 8R 2 1.1 90 1.8 300 PLY10A S1521R 6R 2 1.5 110 1.6 300 PLY10A S2121R 4R 2 2.1 150 1.4 300 PLY10A S2821R 2R 2 2.8 190 1.2 300 PLY10A S4321R 0R 2 4.3 300 1.0 300 PLY10A S6220R 8R 2 6.2 400 0.8 300 PLY10A S8720R 7R 2 8.7 530 0.7 300 PLY10A S9920R 6R 2 9.9 690 0.6 300 PLY10A S1430R 5R 2 14.0 1000 0.5 300 O perating Tem perature (Am bient Tem perature R ange+W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K Part Number Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY10A S7012R 0D 2 0.7 50 2.0 300 PLY10A S1121R 7D 2 1.1 65 1.7 300 PLY10A S1421R 4D 2 1.4 110 1.4 300 PLY10A S2321R 2D 2 2.3 160 1.2 300 PLY10A S3521R 0D 2 3.5 240 1.0 300 PLY10A S4420R 8D 2 4.4 320 0.8 300 PLY10A S8720R 7D 2 8.7 500 0.7 300 PLY10A S9720R 6D 2 9.7 670 0.6 300 PLY10A S1130R 5D 2 11.0 840 0.5 300 PLY10A S2430R 4D 2 24.0 1800 0.4 300 O perating Tem perature (Am bient Tem perature R ange+W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K o Standard W inding Type o Sectional W inding Type
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Equivalent Circuit Diagram C om m on M ode Inductor D ifferential M ode Inductor (1) (2) (3)(4) n Common Mode Insertion Loss-Frequency Characteristics Standard Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY10AS9012R 0R 2 PLY10AS1121R 8R 2 PLY10AS1521R 6R 2 PLY10AS2121R 4R 2 PLY10AS2821R 2R 2 PLY10AS4321R 0R 2 PLY10AS6220R 8R 2 PLY10AS8720R 7R 2 PLY10AS9920R 6R 2 PLY10AS1430R 5R 2 Sectional Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY10AS7012R 0D 2 PLY10AS1121R 7D 2 PLY10AS1421R 4D 2 PLY10AS2321R 2D 2 PLY10AS3521R 0D 2 PLY10AS4420R 8D 2 PLY10AS8720R 7D 2 PLY10AS9720R 6D 2 PLY10AS1130R 5D 2 PLY10AS2430R 4D 2 n Differential Mode Insertion Loss-Frequency Characteristics Standard Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY10AS2121R 4R 2 PLY10AS2821R 2R 2 PLY10AS4321R 0R 2 PLY10AS6220R 8R 2 PLY10AS8720R 7R 2 PLY10AS9920R 6R 2 PLY10AS1430R 5R 2 PLY10AS9012R 0R 2 PLY10AS1121R 8R 2 PLY10AS1521R 6R 2 Sectional Winding Type 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY10AS2321R 2D 2 PLY10AS3521R 0D 2 PLY10AS4420R 8D 2 PLY10AS8720R 7D 2 PLY10AS9720R 6D 2 PLY10AS1130R 5D 2 PLY10AS2430R 4D 2 PLY10AS7012R 0D 2 PLY10AS1121R 7D 2 PLY10AS1421R 4D 2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Features 1. Integration of choke coil function to suppress differential m ode/Low and H igh Frequency com m on m ode noise. 2. Low Profile (H =<13m m ) n Applications 1. For AC pow er supply, AC adapter 2. Low profile equipm ent such as lighting equipm ent, FPD , D igital Am plifier (in m m ) 22.5–0.5 12.5–0.5 ø1.0 m ax. [(2)] (4) [(3)] 15.0–0.5(4) [(1)] (3) [(2)] A/B Type PLY17 Series Part Number Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY17B N 4912R 4A 2 0.49 18 2.4 300 PLY17B N 9612R 0A 2 0.96 36 2.0 300 PLY17B N 1023R 0A 2 1.0 36 3.0 300 PLY17B N 1121R 8A 2 1.1 44 1.8 300 PLY17B N 1721R 5A 2 1.7 67 1.5 300 PLY17B N 2921R 2A 2 2.9 110 1.2 300 PLY17B N 3721R 0A 2 3.7 140 1.0 300 PLY17B N 5620R 8A 2 5.6 210 0.8 300 PLY17B N 7820R 7A 2 7.8 290 0.7 300 PLY17B N 9320R 6A 2 9.3 350 0.6 300 O perating Tem perature (Am bient Tem perature R ange+W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K Part Number Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY17B N 4912R 4B 2 0.49 24 2.4 300 PLY17B N 9612R 0B 2 0.96 47 2.0 300 PLY17B N 1023R 0B 2 1.0 47 3.0 300 PLY17B N 1121R 8B 2 1.1 58 1.8 300 PLY17B N 1721R 5B 2 1.7 88 1.5 300 PLY17B N 2921R 2B 2 2.9 140 1.2 300 PLY17B N 3721R 0B 2 3.7 180 1.0 300 PLY17B N 5620R 8B 2 5.6 280 0.8 300 PLY17B N 7820R 7B 2 7.8 390 0.7 300 PLY17B N 9320R 6B 2 9.3 460 0.6 300 O perating Tem perature (Am bient Tem perature R ange+W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K o A Type o B Type
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Equivalent Circuit Diagram (1) (2) (4) (3) n Common Mode Insertion Loss-Frequency Characteristics 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY17BN 9320R 6-2 PLY17BN 7820R 7-2 PLY17BN 5620R 8-2 PLY17BN 3721R 0-2 PLY17BN 2921R 2-2 PLY17BN 1721R 5-2 PLY17BN 1121R 8-2 PLY17BN 9612R 0-2 PLY17BN 4912R 4-2 PLY17BN 1023R 0-2 n Differential Mode Insertion Loss-Frequency Characteristics PLY17BN*A2 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY17BN 9320R 6A2 PLY17BN 7820R 7A2 PLY17BN 5620R 8A2 PLY17BN 3721R 0A2 PLY17BN 2921R 2A2 PLY17BN 1721R 5A2 PLY17BN 1121R 8A2 PLY17BN 9612R 0A2 PLY17BN 4912R 4A2 PLY17BN 1023R 0A2 PLY17BN*B2 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY17BN 9320R 6B2 PLY17BN 7820R 7B2 PLY17BN 5620R 8B2 PLY17BN 3721R 0B2 PLY17BN 2921R 2B2 PLY17BN 1721R 5B2 PLY17BN 1121R 8B2 PLY17BN 9612R 0B2 PLY17BN 4912R 4B2 PLY17BN 1023R 0B2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Features 1. Integration of choke coil function to suppress differential m ode/Low and H igh Frequency com m on m ode noise. 2. Low Profile (H =<13m m ) 3. Safety standards: EN 60065 n Applications 1. For AC pow er supply, AC adapter 2. Low profile equipm ent such as lighting equipm ent, FPD , D igital Am plifier (in m m ) 22.5–0.5 12.5–0.5 ø1.0 m ax. [(2)] (4) [(3)] 15.0–0.5(4) [(1)] (3) [(2)] A/B Type Part Number Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY17B S4912R 4A 2 0.49 18 2.4 250 PLY17B S9612R 0A 2 0.96 36 2.0 250 PLY17B S1023R 0A 2 1.0 36 3.0 250 PLY17B S1121R 8A 2 1.1 44 1.8 250 PLY17B S1721R 5A 2 1.7 67 1.5 250 PLY17B S2921R 2A 2 2.9 110 1.2 250 PLY17B S3721R 0A 2 3.7 140 1.0 250 PLY17B S5620R 8A 2 5.6 210 0.8 250 PLY17B S7820R 7A 2 7.8 290 0.7 250 PLY17B S9320R 6A 2 9.3 350 0.6 250 O perating Tem perature (Am bient Tem perature R ange+W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K Part Number Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY17B S4912R 4B 2 0.49 24 2.4 250 PLY17B S9612R 0B 2 0.96 47 2.0 250 PLY17B S1023R 0B 2 1.0 47 3.0 250 PLY17B S1121R 8B 2 1.1 58 1.8 250 PLY17B S1721R 5B 2 1.7 88 1.5 250 PLY17B S2921R 2B 2 2.9 140 1.2 250 PLY17B S3721R 0B 2 3.7 180 1.0 250 PLY17B S5620R 8B 2 5.6 280 0.8 250 PLY17B S7820R 7B 2 7.8 390 0.7 250 PLY17B S9320R 6B 2 9.3 460 0.6 250 O perating Tem perature (Am bient Tem perature R ange+W inding Tem perature R ise): -25°C to 120°C W inding Tem perature R ise (at R ated C urrent) (m ax.): 60K PLY17 Series (Safety Standard R ecognized) o A Type o B Type
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Equivalent Circuit Diagram (1) (2) (4) (3) n Common Mode Insertion Loss-Frequency Characteristics 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY17BS9320R 6-2 PLY17BS7820R 7-2 PLY17BS5620R 8-2 PLY17BS3721R 0-2 PLY17BS2921R 2-2 PLY17BS1721R 5-2 PLY17BS1121R 8-2 PLY17BS9612R 0-2 PLY17BS4912R 4-2 PLY17BS1023R 0-2 n Differential Mode Insertion Loss-Frequency Characteristics PLY17BS*A2 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY17BS9320R 6A2 PLY17BS7820R 7A2 PLY17BS5620R 8A2 PLY17BS3721R 0A2 PLY17BS2921R 2A2 PLY17BS1721R 5A2 PLY17BS1121R 8A2 PLY17BS9612R 0A2 PLY17BS4912R 4A2 PLY17BS1023R 0A2 PLY17BS*B2 0.1 1 10 100 0.01 Frequency (M H z) Insertion Loss (dB) PLY17BS9320R 6B2 PLY17BS7820R 7B2 PLY17BS5620R 8B2 PLY17BS3721R 0B2 PLY17BS2921R 2B2 PLY17BS1721R 5B2 PLY17BS1121R 8B2 PLY17BS9612R 0B2 PLY17BS4912R 4B2 PLY17BS1023R 0B2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

N oise Suppression Effect of PLY10 Series !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. The data show s noise suppression effects com parison PLY10 w ith existing com m on m ode choke coil. (In AC adaptor of note PC )
• N oise Level The filter circuit w ith hybrid choke coil has suppressed conducted noise as w ell as conventional filter in spite of its com pact com position. 1000pF680µH 0.1µF0.33µF C om m on m ode choke coil and differentical m ode choke coil are used. H ybrid choke coil PLY10 24m H 1000pF 0.1µF0.33µF PLY10A1130R 5D 0.5 1 5 10 30 Frequency (M H z) N oise Level (dBµV) 0.5 1 5 10 30 Frequency (M H z) C om m on m ode choke coil and differencial m ode choke coil are used. H ybrid choke coil PLY10 N oise Level (dBµV)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!C aution /N otice !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n !Caution (Rating) 1. R ated C urrent O perating current should not exceed the rated value. Even if operating current is under the rated value, adequate ventilation is required to avoid excessive heat generated w ithin the product (choke coil) and from surrounding heat sources. If exceeding these conditions, excessive heat m ay cause fum es or perm anent dam age to the product. Please ensure that product (choke coil) is evaluated and confirm ed against the specification w hen it is m ounted in your final assem bled product. -> W inding tem perature should be less than 120 degree C . *As for FKO B series w inding tem perature should be less than 95 degree C . M axim um allow able tem perature at the surface of coil (am bient tem perature + w inding tem perature rise) is in accordance w ith each safety standard applicable to final assem bled product. W hen the tem perature at w inding exceeds m axim um allow able tem perature of safety standard, the rated current should be derated. 2. Inrush C urrent Inrush current should not exceed 10 tim es rated current w ithin 1/4 cycle of 50/60H z com m ercial pow er line. Inrush current should be lim ited to a m inim um of 10 seconds after last inrush. If these conditions are exceeded, excessive heat m ay cause fum es or perm anent dam age to the com ponent, or at w orst cause ignition. n Notice (Storage and Operating Condition) 1. Soldering C onditions
• R osin-based flux should be used. D o not use strong acidic flux w ith halide content exceeding 0.2w t% (chlorine conversion value)
• U se 63/37 solder (Sn/Pb = 63/37) or 60/40 solder (Sn/Pb = 60/40). In case of lead-free solder, use Sn-3.0Ag-0.5C u solder 2. C leaning Avoid cleaning product due to non-w aterproof construction. 3. Storage and H andling R equirem ents Product should be used w ithin 12 m onths after receiving. Solderability should be checked if this period is exceeded. (1) Flux, Solder (1) Storage period Storage Tem perature: -10 to 40 °C R elative hum idity: 30 to 70% Avoid sudden changes in tem perature and hum idity. D on't keep products in corrosive gases such as sulfur, chlorine gas or acid, or it m ay cause oxidation of lead term inals resulting in poor solderability or corrosion of com ponent w indings. (2) Storage conditions C are should be taken w hen transporting or handling product to avoid excessive vibration or m echanical shock. For additional m ounting m ethods, please contact M urata. (3) H andling conditions (2) Flow soldering profile Standard profile Limit profile Sn/Pb = 60/40, Sn/Pb = 63/37 Sn-3.0Ag-0.5Cu solder Soldering temp. 240-260°C Soldering time 5s max. Soldering temp. 250–2°C Soldering time 4-6s Soldering temp. 265–3°C Soldering time Cycle of flow 2 times Pre-heating Soldering G radual cooling (in air) 150°C 300 250 200 150 100 Tem perature (°C ) 60s m in. Soldering tim e Soldering tem perature n Notice (Soldering and Mounting) M agnetic Flux Leakage C hoke coils generate sm all am ounts of m agnetic flux leakage that m ay adversely affect equipm ent operation according to com ponent arrangem ent. Testing should be com pleted on final assem bly to ensure equipm ent perform ance is not affected. n Notice (Rating) C oil H um m ing N oise M agnetic flux generated betw een coil and core or betw een the choke coil w indings creates repulsive pow er betw een the coil w indings. This repulsive pow er causes the coil w inding to vibrate and create a hum m ing noise. The am ount of hum produced by the coil is proportionate to the am ount of harm onic distortion generated by the operating current. This does not influence the electrical perform ance of the coils, but it should be considered and tested in actual circuit application.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Minimum Quantity Part Number FK O B PLA 10 PLH 10 PLY10 PLY17 1800 1800 1800 1920 Magazine Package 100 1260 1260 1200 1080 Box Minimum Quantity (pcs.)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9

Note: 1. Export Control <For customers outside Japan> No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. <For customers in Japan> For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above 3. Product specifications in this catalog are as of January 2006. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp Head Office 1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 http://www.murata.com/

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C09E.pdf 06.2.9