PL8600 PULSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Toroid - Military/Aerospace POGO Series Ruggedized header with POGO pins for secure board mounting Current Rating: up to 8.3ADC Inductance Range: 2.0µH to 336µH For More Information: Pulse Worldwide Headquarters
2 Pearl Buck Court
Bristol, PA 19007 U.S.A. www.pulseeng.com TEL: 215 781 6400 FAX: 215 781 6403 Pulse Northern Europe
3 Huxley Road
Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Pulse Southern Europe Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 Pulse South Asia
150 Kampong Ampat
#07-01/02 KA Centre Singapore 368324 TEL: 65 6287 8998 FAX: 65 6280 0080 Pulse North Asia 3F-4, No. 81, Sec. 1 Hsin Tai Wu Road Hsi-Chih Taipei Hsien Taiwan TEL: 886 2 26980228 FAX: 886 2 26980948 Pulse China Headquarters No. 1 Industrial District Changan, Dongguan China TEL: 86 769 5538070 FAX: 86 769 5538870 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2005. Pulse Engineering, Inc. All right reserved. Pulse North China Room 1002 No. 819 Nanjing West Rd Shanghai China TEL: 86 21 32181071 FAX: 86 21 32181396 www.pulseeng.com M114.A (10/05) Mechanical Schematic /MT49 /MT50 /MT52 /MT51 /MT49/MT58/MT49/MT32/MT177/MT50/MT37 /MT51/MT50 /MT52/MT49 /MT83/MT85/MT71/MT71/MT69/MT83/MT84/MT69/MT68/MT32/MT80/MT65/MT68/MT32/MT76/MT65/MT89/MT79/MT85/MT84 /MT32/MT46/MT52/MT48/MT48 /MT49/MT48/MT44/MT49/MT54 /MT32/MT46/MT53/MT48/MT48 /MT49/MT50/MT44/MT55/MT48 /MT46/MT48/MT56/MT48 /MT50/MT44/MT48/MT51/MT52/MT88 /MT32/MT46/MT52/MT48/MT48 /MT49/MT48/MT44/MT49/MT54 /MT77/MT65/MT88 /MT32/MT46/MT53/MT50/MT53 /MT49/MT51/MT44/MT51/MT52 /MT32/MT46/MT53/MT48/MT48 /MT49/MT50/MT44/MT55/MT48 /MT32/MT46/MT54/MT50/MT53 /MT49/MT53/MT44/MT56/MT56 /MT77/MT65/MT88 /MT46/MT50/MT51/MT53 /MT53/MT44/MT57/MT55 /MT46/MT48/MT48/MT52/MT47/MT48/MT44/MT49/MT48 /MT52/MT32/MT83/MT85/MT82/MT70/MT65/MT67/MT69/MT83 /MT77/MT65/MT88 /MT32/MT46/MT51/MT49/MT48 /MT32/MT55/MT44/MT56/MT55 Inductance Inductance 100 Gauss 1 Amp DCPart @ Irated Irated DCR (MAX) ET @0ADC ET100 H1 ConnectionNumber (µH MIN) (A) (m Ω) (V-µsec) (µH ±10%) (V-µsec) (Orsted) Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C NOTES: 1. Temperature rise is 50°C in typical buck or boost circuits at 250kHz and with the reference ET applied to the inductor. 2. Total loss in the inductor is 380mWatts for a 50°C temperature rise above ambient. 3. To estimate temperature rise in a given application, determine copper and core losses, divide by 380 and multiply by 50. 4. For the copper loss, calculate IDC2 X RN. 5. For core loss, using frequency (f) and operating flux density (B), calculate 6.11 x 10-18 x B2.7 x f2.04. 6. For flux density (B), calculate ET (V-µsec) for the application, divide by ET100 from the table, and multiply by 100. 7. Limit the DC bias (H) to 46 orsteds. Calculate H by multiplying H1 from the table by IDC of the application. 8. The maximum DCR listed is approximately 17% over the nominal DCR. 9. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. PL8600 becomes PL8600T). Pulse complies to industry standard tape and reel specification EIA481. POGO 25 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25