DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Specifications subject to change without notice. Please check our website for latest information. US UK Taiwan China Singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Primary Primary Leakage Volt-time Height Part turns inductance2 inductance3 DCR max (mOhms) product typ5 max number1 N1 N 2 min (µH) max (µH) Primary (N1) Primary (N2) Secondary 4 (Vµsec) (in / mm) SMT Planar Transformers Document 1072-1 Document 1072-1 Revised 05/04/15 1. To order a transformer with an optional auxiliary winding, add an “X” and the turn count after the PL160, e.g. PL160X3-100LB. Turn counts of 2, 3, 4, 5, 7 and 9 are available for the auxiliary winding. Transformers with auxiliary windings are not stocked. 2. Inductance measured on an Agilent/HP 4284 at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5 with pins 3 and 4 connected. 3. Leakage inductance measured at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5, with pins 3 and 4 connected, and with all secondary pins shorted. 4. DCR for secondary is measured between pins 7 and 11. 5. Volt-time product is based on primary windings connected in series. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. For Applications up to 160 Watts Pri N1 Pri N2 Aux (Opt) 1T Core material Ferrite Terminations Matte tin over nickel over brass Weight 12.0 – 12.8 g Ambient temperature –40°C to +125°C Storage temperature Component: –40°C to +125°C. Tray packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 36 per tray PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf
- Rated for 160 Watts
- Designed to operate between 200 kHz and 700 kHz with a nominal 48 V input.
- High efficiency; excellent DCR; very low leakage inductance; 1500 Vrms, one minute primary to secondary isolation.
- Provides 0.009″ (0.229 mm) clearance above the seating plane
- May be special ordered with an auxiliary winding
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. PL160 Series SMT Planar Transformers Document 1072-2 Document 1072-2 Revised 05/04/15 Height (see table) 0.920 23,37 0.050 1,27 0.080 2,03 max Dot indicates pin 1I nternal code 0.800 20,32 Recommended Land Pattern 0.125 3,175 0.090 2,285 0.200 5,080 0.110 2,790.080 2,03 ∅ ∅0.390 9,91 CL Dash Height max number (inches / mm) -100L 0.352 / 8.94 -101L 0.352 / 8.94 -102L 0.360 / 9.14 -103L 0.375 / 9.53 -104L 0.375 / 9.53 PL160-10xL XXXX Y 0.820 20,83 max 0.009 0,229 min 0.004/0,102 Dimensions are in inches mm