LEDXR90S BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

LED Ring Lights for Use with PresencePLUS® Pro Sealed Sensors Shown with cable installed; see Cables list for op- tions

  • Rugged, waterproof housing, rated IEC IP68
  • 90 mm light diameter
  • Solid-state LED matrix; continuous or strobed operation is selectable via sen- sor software.
  • Available with 316 stainless steel or nickel-plated aluminum housing and a choice of either acrylic or tempered optical glass windows
  • Mounts directly to PresencePLUS Pro washdown sensors
  • LEDs directly illuminate target Models LED Color Housing Optional Ambient Light Filter Kit Optional Polarizing Filter KitAcrylic Window Glass Window LEDIR90S-P LEDIR90S-G Infrared, 940 nm Nickel-plated alu- minum FLTI, included with IR lights LEDRPFK90 LEDRR90S-P LEDRR90S-G Visible Red, 630 nm FLTR, included with LEDRPFK90 LEDWR90S-P LEDWR90S-G White, All Visible FLTB or FLTG LEDBR90S-P LEDBR90S-G Blue, 464 to 475 nm FLTB LEDGR90S-P LEDGR90S-G Green, 520 to 540 nm FLTG LEDIR90SS-P LEDIR90SS-G Infrared, 940 nm

316 Stainless steel

FLTI, included with IR lights LEDRR90SS-P LEDRR90SS-G Visible Red, 630 nm FLTR, included with LEDRPFK90 LEDWR90SS-P LEDWR90SS-G White, All Visible FLTB or FLTG LEDBR90SS-P LEDBR90SS-G Blue, 464 to 475 nm FLTB LEDGR90SS-P LEDGR90SS-G Green, 520 to 540 nm FLTG Specifications Supply Voltage and Current Infrared: 24V dc @ 180 mA max. All other colors: 24V dc @ 250 mA max. Connections 8 mm male Pico-style connector; accessory cable re- quired for operation, see page 3 for options Construction Housing: Nickel-plated aluminum or 100% 316 stain- less steel, depending on model Window: Acrylic or tempered optical glass window, de- pending on model Environmental Rating Nickel-plated models: IEC IP68 Light Source LED, see Models table above for wavelengths Illumination High-intensity ring light Useful Life When operated within specifications, output will de- crease less than 30% after 20,000 hours and less than 50% (less than 40% for red and IR models) after 30,000 hours. Cleaning Instructions Regularly remove any dust, dirt, or fingerprints from the light source. 1. Blow off dust using anti-static compressed air. LEDxR90S Series Sealed Ring Lights P/N 128842 rev. D 8/2/2012 0 128842 7

  1. If necessary, use a lens cloth and lens cleaner or

use any other chemicals for cleaning. Figure 1. Dimensions ing unwanted ambient light. See Models table for further information.

  1. Install and focus lens while holding ring light beside the sensor, illuminating the target.
  2. Thread on ring light assembly until it is seated against the sensor.
  3. Loosen the set screw and rotate the cable outlet to the desired position. Tighten set screw. Do not overtighten.
  4. Install cable (not included, see page 3) to cable outlet.
  5. Connect cable to power source.
  6. Connect strobe signal output from Pro controller to strobe input wire (black) of light (optional).

from perpendicular to a shiny surface.

Cables for the LEDxR90S Series Sealed Ring Lights Model Length Description Use With PKG3M-4 4 m (13') Female Pico-style (8 mm) connector at one end; fly- ing leads at opposite end Nickel-plated aluminum models PKG3M-7 7 m (23') PKG3M-10 10 m (33') PKGV3M-4 4 m (13') Female Pico-style (8 mm) 316 stainless steel connec- tor at one end; flying leads at opposite end Stainless steel models PKGV3M-7 7 m (23') PKGV3M-10 10 m (33') Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (IN- CLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPEN- SES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WAR- RANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. LEDxR90S Series Sealed Ring Lights