Q20 BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

  • Photoelectric sensors in a compact, rugged, sealed, over-molded plastic housing
  • Standard 3 mm threaded mounting holes on 25.4 mm (1 in) spacing
  • Advanced electronic design for excellent noise immunity and cross-talk avoidance
  • Threaded metal M8 connector on Pico-style quick-disconnect models
  • 10 V dc to 30 V dc operation with complementary solid-state outputs (1 normally open, 1 normally closed); PNP or NPN, depending on model
  • Complete offering of mounting brackets and apertures available
  • Crosstalk prevention filters available for visible red opposed mode pairs
  • Exceptional optical performance with easy to align visible red emitters
  • Background suppression models provide reliable detection up to 150 mm while ignoring objects in the background
  • Background suppression models provide stable detection in the presence of fluorescent lights WARNING:
  • Do not use this device for personnel protection
  • Using this device for personnel protection could result in serious injury or death.
  • This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de- energized (off) output condition. Models Model1 Sensing Mode Range Output2 Q20E Opposed, 624 nm Visible Red Effective Beam: 10 mm (0.4 in) 12 m (39.4 ft) N/A Q20PR PNP Q20NR NPN Q20EL Opposed, 850 nm Infrared Effective Beam: 10 mm (0.4 in) 20 m (65.6 ft) N/A Q20PRL PNP Q20NRL NPN Q20PLP Polarized Retroreflective, 645 nm Visible Red 4 m (13 ft) (specified using reflector BRT-84) PNP Q20NLP NPN Q20PLV Retroreflective, 645 nm Visible Red 6 m (20 ft) (specified using reflector BRT-84) PNP Q20NLV NPN Q20PDL Long-Range Diffuse, 624 nm Visible Red 800 mm (32 in) PNP Q20NDL NPN Diffuse-mode and fixed-field performances are based on the use of a 90% reflectance white test card. Model 1 Sensing Mode Range Output2 Q20PDXL Long Range DIffuse, 850 nm Infrared 1500 mm (59 in) PNP Q20NDXL NPN Q20PD Short Range Diffuse, 624 nm Visible Red 250 mm (10 in) PNP Q20ND NPN Q20PDVS Small Spot Diffuse, 660 nm Visible Red 250 mm (10 in) PNP Q20NDVS NPN Q20PFF50 Fixed Field, 655 nm Visible Red 50 mm (2 in) cutoff PNP Q20NFF50 NPN Q20PFF100 100 mm (4 in) cutoff PNP Q20NFF100 NPN Q20PFF150 150 mm (6 in) cutoff PNP Q20NFF150 NPN 1 Integral 2 m (6.5 ft) unterminated cable models are listed.
  • To order the 9 m (30 ft) PVC cable model, add the suffix "W/30" to the cabled model number. For example, Q20E W/30.
  • To order the 4-pin M8/Pico-style integral quick disconnect model, add the suffix "Q7" to the model number. For example, Q20EQ7.
  • To order the 150 mm (6 in) PVC cable model with a 4-pin M8/Pico-style quick disconnect, add the suffix "Q" to the model number. For example, Q20EQ.
  • To order the 150 mm (6 in) PVC cable model with a 4-pin M12/Euro-style quick disconnect, add the suffix "Q5" to the model number. For example, Q20EQ5.
  • To order the 150 mm (6 in) PUR cable model with a 4-pin M12/Euro-style quick disconnect, add the suffix "QPMA" to the model number. For example, Q20EQPMA.
  • Models with a quick disconnect require a mating cordset. 2 Available with Health or Alarm Mode output; contact Banner Engineering for details. WORLD-BEAM® Q20 Series Sensor Original Document 127816 Rev. M

31 July 2019

Banner’s Q20 family of sensors offers a full complement of sensing modes, with the excellent performance expected of much larger sensors. Their compact plastic housings feature overmolded construction for superior robustness and sealing. Their popular rectangular design is easy to mount into tight spaces; integral threaded mounting holes eliminate the need for separate mounting nuts. The single-turn Gain potentiometer on most models and bright LEDs (positioned on top of the housing for 360° visibility) provide easy alignment and configuration for reliable sensing. 1 23 (varies with model) 1. Output LED 2. Power LED 3. Single-Turn Gain Potentiometer (Retro and Diffuse models only) Wiring Diagrams Cabled wiring diagrams are shown. Quick disconnect wiring diagrams are functionally identical. Emitter 10-30V dc PNP Output 10-30V dc

4 Load

  1. Brown 2. White 3. Blue 4. Black 4-pin M8/Pico-style Male QD 4-pin M12/Euro-style Male QD Specifications Supply Voltage Fixed-Field: 10 to 30V dc (10% maximum ripple within specified limits) at less than 25 mA, exclusive of load All others: 10 to 30V dc (10% maximum ripple within specified limits) at less than 18 mA, exclusive of load Supply Protection Circuitry Protected against reverse polarity and transient voltages Repeatability Opposed mode: 140 microseconds All other models: 90 microseconds Construction ABS housing; PMMA lenses; PBT Gain Adjuster (Retro and Diffuse models only) WORLD-BEAM® Q20 Series Sensor 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 127816 Rev. M

Output Configuration for Receiver 100 mA with short circuit protection OFF-state leakage current: NPN: < 200 µA sinking (see Application Note 2); PNP: < 10 µA sourcing ON-state saturation voltage NPN: < 1.6 V at 100 mA PNP: < 3.0 V at 100 mA Output Configuration for all Other Models Maximum Current ≤ 100 mA PNP Output Voltage: High ≥ Vsupply – Vsaturation Low ≤ 1 V (≤ 1M Ω) NPN Output Voltage: High ≥ Vsupply – 1 V (≤ 1M Ω) Low ≤ Vsaturation Vsaturation ≤ 3 V Output Response Time Opposed mode: 1 millisecond ON/600 microseconds OFF All other models: 850 microseconds ON/OFF 100 millisecond delay on power-up; outputs do not conduct during this time Connections 2 m (6.5 ft) or 9 m (30 ft) 4-wire PVC cable, 150 mm (6 in) cable with 4-pin threaded M8/Pico-style (Q) or M12/Euro-style (Q5) connector, or 4-pin integral threaded M8/Pico-style connector (Q7), depending on the model ordered Indicators Two LED Indicators: Power (green) and Output (amber) Fixed-Field models: Green on: Power ON Amber on: Black (LO) wire conducting All other models: Green on: Power ON Amber on: Black (LO) wire conducting Amber flashing: Marginal excess gain (1 to 1.5×) Black (LO) wire conducting Adjustments Diffuse, Retroreflective, and Polarized Retroreflective models (only): Single-turn Sensitivity (Gain) adjustment potentiometer Applications Notes 1. Opposed mode sensor spacing can be reduced by alternating emitters and receivers or by applying cross talk filters (visible red models only) 2. For receiver only: NPN off-state leakage current is <200 µA for load resistances > 3kΩ or optically isolated loads. For load currents of 100 mA, leakage is <1% of load current. Operating Conditions 95% at +50 °C maximum relative humidity (non-condensing) Environmental Rating IEC IP67; NEMA 6 Vibration and Mechanical Shock All models meet MIL-STD-202F, Method 201A (Vibration: 10 Hz to 60 Hz maximum, 0.06 inch (1.52 mm) double amplitude, 10G maximum acceleration) requirements. Also meets IEC 60947-5-2 (Shock: 30G 11 ms duration, half sine wave) requirements. Certifications (Class 2 power supply required) Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Performance Curves Opposed Mode Models Excess Gain Beam Pattern 100 0.1 m0.3' 1.0 m3.0' 10 m30' 100 m300' 1000 EXCESS GAIN DISTANCE Q20Opposed InfraredFilter Visible 400 mm 800 mm 1200 mm 400 mm 800 mm 1200 mm 16" 31" 47" 16" 31" 47" DISTANCE Q20 Opposed Mode VisibleFilters Infrared WORLD-BEAM® Q20 Series Sensor P/N 127816 Rev. M www.bannerengineering.com - Tel: + 1 888 373 6767 3

Retroreflective Mode Models (based on retroreflector BRT-84) Excess Gain Beam Pattern Excess Gain Beam Pattern 100 EXCESSGAIN DISTANCE Q20 LP Retroreflective Mode 5 m16'4 m13'3 m10'2 m6.6'1 m3.3'0 050 mm100 mm150 mm 50 mm100 mm150 mm 02"4"6" 2"4"6" DISTANCE Q20 LP Retroreflective Mode 100 EXCESSGAIN DISTANCE Q20 LV Retroreflective Mode 8 m26'6 m20'4 m13'2 m6.6'0 050 mm100 mm150 mm200 mm 50 mm100 mm150 mm200 mm 02"4"6"8" 2"4"6"8" DISTANCE Q20 LV Retroreflective Mode Diffuse Mode Models (based on 90% reflectance white test card) Excess Gain Beam Pattern Excess Gain Beam Pattern 100 1000 EXCESSGAIN DISTANCE Q20Short Range Diffuse 250 mm10"200 mm8.0"150 mm6.0"100 mm4.0"50 mm2.0"0 010 mm20 mm30 mm 10 mm20 mm30 mm 00.4"0.8"1.2" 0.4"0.8"1.2" DISTANCE Q20 Diffuse – short range 100 1000EXCESSGAIN DISTANCE Q20Long Range Diffuse InfraredVisible 1500 mm59"1200 mm47"900 mm35"600 mm24"300 mm12"0 020 mm40 mm60 mm 20 mm40 mm60 mm 00.8"1.6"2.4" 0.8"1.6"2.4" DISTANCE Q20 Diffuse – long range Visible Infrared Q20DVS Models Excess Gain Beam Pattern Excess Gain Distance (mm) 11 10 100 1000 100 Distance (mm) Width (mm) 0 50 100 150 200 250-4 Fixed-Field Excess Gain (based on 90% reflectance white test card) 100 1000 EXCESS GAIN DISTANCE Q20 FF 50 mm 100 1000 EXCESS GAIN DISTANCE Q20 FF 100 mm 100 1000 EXCESS GAIN DISTANCE Q20 FF 150 mm WORLD-BEAM® Q20 Series Sensor 4 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 127816 Rev. M

Fixed-Field Excess Gain (based on 90% reflectance white test card) Ø 6 mm spot size at 25 mm Ø 6 mm spot size at 50 mm cutoff Using 18% gray test card: cutoff distance will be 95% of value shown Using 6% black test card: cutoff distance will be 90% of value shown Ø 6 mm spot size at 50 mm Ø 6 mm spot size at 100 mm cutoff Using 18% gray test card: cutoff distance will be 90% of value shown Using 6% black test card: cutoff distance will be 85% of value shown Ø 6 mm spot size at 75 mm Ø 9 mm spot size at 150 mm cutoff Using 18% gray test card: cutoff distance will be 80% of value shown Using 6% black test card: cutoff distance will be 70% of value shown See Accessories (p. 5), the Accessories section of the current Banner catalog, or www.bannerengineering.com for complete information. Note: Polarized sensors require corner cube type retroreflective targets only. Dimensions 25.4 mm (1.00") 3.3 mm (0.13") 3.3 mm (0.13") 32.0 mm (1.26") 42.0 mm (1.65") 1.8 mm (0.07") 12.0 mm (0.47") 2X M3 X0.5 Max. Torque 0.56 Nm (5 in. lbs.) Cabled and Pigtail QD Models Integral QD Models 2 - M3 screws (12 mm) washers included 9.9 mm (0.39") 10.5 mm (0.42") 20.0 mm (0.79") Accessories Mounting Brackets SMBQ20L

  • Sensor vertical base mount
  • ±5° tip, ±7° swivel
  • Stainless steel 40 4 X Ø3.2 4 X Ø3.4 SMBQ20LV
  • Sensor vertical back mount
  • ±10° tip
  • Stainless steel 15Ø3.2 2 X Ø3.2 4 X Ø3.4 WORLD-BEAM® Q20 Series Sensor P/N 127816 Rev. M www.bannerengineering.com - Tel: + 1 888 373 6767 5
  • Sensor horizontal flange mount
  • ±10° swivel
  • Stainless steel 55 2316 4 X Ø3.2 4 X Ø3.4 SMBQ20U
  • Sensor vertical base mount with protection
  • ±22.5° swivel
  • Stainless steel 12.534 4 X Ø3.2 39 4 X Ø3.2 Cross Talk Prevention Filters Model 3 Description Reduced Sensor Range E/R (two apertures used) PFQ20-H Stainless steel (natural color) Quick-Disconnect (QD) Cordsets 4-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) 4-Pin Snap-on M8/Pico-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) PKG4-2 2 m (6.56 ft) Straight ø 9.0 32 Typ. 3 1 1 = Brown 2 = White 3 = Blue 4 = Black PKW4Z-2 2 m (6.56 ft) Right-Angle ø 10.9 29 Typ. 15 Typ. 3 For visible red models only. The "H" and "V" in the model numbers refer to the polarization of the filter material. Since they are visually identical, the "H" models have been left the natural stainless steel and the "V" models have been colored black. WORLD-BEAM® Q20 Series Sensor 6 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 127816 Rev. M

4-Pin Threaded M8/Pico-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) PKG4M-2 2 m (6.56 ft) Straight ø 9.5 35 Typ. M8 x 1 3 1 1 = Brown 2 = White 3 = Blue 4 = Black PKG4M-5 5 m (16.4 ft) PKG4M-9 9 m (29.5 ft) PKW4M-2 2 m (6.56 ft) Right Angle ø 9.5 28 Typ. 20 Typ. M8 x 1 PKW4M-5 5 m (16.4 ft) PKW4M-9 9 m (29.5 ft) Apertures Model Reduced Sensor Range E/R (two apertures used) Reduced Sensor Range EL/RL (two apertures used)

Description

APK-Q20 Includes two of each type Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. WORLD-BEAM® Q20 Series Sensor P/N 127816 Rev. M www.bannerengineering.com - Tel: + 1 888 373 6767 7

FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the manufacturer. WORLD-BEAM® Q20 Series Sensor © Banner Engineering Corp. All rights reserved