PKG3M-10

Q12 BANNER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Miniature self-contained photoelectric sensors in universal housing

• Bright, visible red (640 nm) light source
• Standard models available with 4-wire 2 m (6.5 ft) or 9 m (30 ft) cable or 3 or 4- wire 150 mm (6 in) pigtail with Pico-style M8 threaded connector
• Solid-state, bipolar outputs: one current sourcing (PNP) and one current sinking (NPN) standard on 4-wire models
• Single output solid-state PNP or NPN standard on Q3 models
• Light Operate (L.O.) or Dark Operate (D.O.), depending on model
• Models available with PFA chemical-resistant jacket (1200 psi washdown rated) for use in harsh environments
• Compact 8 mm (0.31 in) housing mounts almost anywhere
• Crosstalk avoidance circuitry for applications with multiple sensors
• LED status indicators for Power ON, Output Overload, Signal Received, and Marginal Signal
• Models with black housing are available Standard Model Chemical-Resistant Model WARNING:
• Do not use this device for personnel protection
• Using this device for personnel protection could result in serious injury or death.
• This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de- energized (off) output condition. Chemical-Resistant Models Sensing Mode Model1 2 Range Output 640 nm Visible Red Q126ECR 1.5 m (4.9 ft) N/A OPPOSED Effective Beam: 5.7 mm (0.22 in) Q12AB6RCR Bipolar LO Q12RB6RCR Bipolar DO Performance based on use of 90% reflectance white test card. FIXED-FIELD VISIBLE RED 640 nm Visible Red Q12AB6FF15CR 13 mm (0.5 in) cutoff; 8 mm (0.3 in) focus Bipolar LO Q12RB6FF15CR Bipolar DO Q12AB6FF30CR 28 mm (1.1 in) cutoff; 14 mm (0.6 in) focus Bipolar LO Q12RB6FF30CR Bipolar DO Q12AB6FF50CR 48 mm (1.9 in) cutoff; 14 mm (0.6 in) focus Bipolar LO Q12RB6FF50CR Bipolar DO 1 Only standard 2 m (6.5 ft) cables are available for chemical-resistant models. 2 To order the black housing model, add the prefix D to the model number, for example, DQ12AB6FF15CR. WORLD-BEAM® Q12 Series Sensor Original Document 119223 Rev. K

31 July 2019

Sensing Mode Model3 Range Connection Output 640 nm Visible Red Q126E (emitter) 2 m (6.5 ft) 2 m (6.5 ft) cable N/A OPPOSED Effective Beam: 5.7 mm (0.22 in) Q12AB6R 2 m (6.5 ft) cable Bipolar LO Q12RB6R Bipolar DO Q12AP6RQ3 150 mm (6 in) cable with a 3-pin M8/Pico-style QD

1 PNP LO

P POLAR RETRO 640 nm Visible Red Q12AB6LP 1 m (40 in) 4 2 m (6.5 ft) cable Bipolar LO Q12RB6LP Bipolar DO Q12AP6LPQ3 150 mm (6 in) cable with a 3-pin M8/Pico-style QD 1.5 m (59 in) 4 2 m (6.5 ft) cable Bipolar LO Q12RB6LV Bipolar DO Q12AP6LVQ3 150 mm (6 in) cable with a 3-pin M8/Pico-style QD Performance based on use of 90% reflectance white test card. FIXED-FIELD VISIBLE RED 640 nm Visible Red Q12AB6FF15 15 mm (0.6 in) cutoff; 10 mm (0.4 in) focus 2 m (6.5 ft) cable Bipolar LO Q12RB6FF15 Bipolar DO Q12AP6FF15Q3 150 mm (6 in) cable with a 3-pin M8/Pico-style QD 30 mm (1.2 in) cutoff; 16 mm (0.63 in) focus 2 m (6.5 ft) cable Bipolar LO Q12RB6FF30 Bipolar DO Q12AP6FF30Q3 150 mm (6 in) cable with a 3-pin M8/Pico-style QD 50 mm (2 in) cutoff; 16 mm (0.63 in) focus 2 m (6.5 ft) cable Bipolar LO Q12RB6FF50 Bipolar DO Q12AP6FF50Q3 150 mm (6 in) cable with a 3-pin M8/Pico-style QD 3 • To order the black housing model, add the prefix D to the model number, for example DQ12AB6FF15.

• To order the 9 m (30 ft) cable model, add the suffix W/30 to the model number. For example, Q126E W/30.
• To order the 150 mm (6 in) cable with a 4-pin M8/Pico-style (M8 threaded) QD model, add the suffix Q to the model number. For example, Q126EQ.
• To order the 150 mm (6 in) cable with a 4-pin M12/Euro-style QD model, add the suffix Q5 to the model number. For example Q126EQ5. 4 Retroreflective range is specified using one model BRT-60X40C retroreflector. Actual sensing range may be more or less than specified, depending upon efficiency and reflective area of the retroreflector(s) used. WORLD-BEAM® Q12 Series Sensor 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 119223 Rev. K

1 1 - Amber and green LEDs

• Green on: power to sensor is on
• Green flashing: output is overloaded
• Amber on: received signal
• Amber flashing: marginal signal Chemical-Resistant models: LEDs are visible through translucent PFA jacket. Rated to 1200 psi washdown. Wiring Cabled wiring diagrams are shown. Connections for QD models are functionally identical. (Emitters have no connection to black and white.) CAUTION: Observe proper ESD precautions (grounding) when connecting QD models. Emitters 10-30V dc Bipolar Models 10-30V dc Load Load PNP Models 10-30 V dc

4 Load

1 = Brown 2 = White 3 = Blue 4 = Black NPN Models 10-30 V dc 3-pin M8/Pico-style Male QD 1 3 4-pin M8/Pico-style Male QD 4-pin M12/Euro-style Male QD Specifications Supply Voltage and Current 10 to 30 V dc (10% maximum ripple) at 20 mA maximum current Sensing Beam 640 nm visible red Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Bipolar (1 NPN and 1 PNP) solid-state output or Single output (PNP or NPN), LO or DO, depending on model Repeatability 175 microseconds Switching Frequency Opposed Mode: 385 Hz All Other Modes: 715 Hz WORLD-BEAM® Q12 Series Sensor P/N 119223 Rev. K www.bannerengineering.com - Tel: + 1 888 373 6767 3

NOTE: 120 ms delay on power-up; outputs do not conduct during this time. duration, half sine wave) requirements. application per the supplied table. Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com.

0.9 Nm (8 in-lbf)

Figure 1. Standard Models

the max. torque applied should be 0.1 Nm (1 in-lbf). Figure 2. Chemical-Resistant Models Performance is based on the use of a model BRT-60X40C retroreflector.

Performance Curves - Fixed-Field Focus and spot sizes are typical. Performance based on use of 90% reflectance white test card.* Fixed Field -- 15 mm Fixed Field -- 30 mm Fixed Field -- 50 mm 100 10 mm0.4" 100 mm4.0" 1000 mm40.0"1 mm0.04" 1000 DISTANCE Q12..FF15 Fixed-Field Standard Chemical-Resistant Q12..FF15 Fixed-Field EXCESS GAIN 100 10 mm0.4" 100 mm4.0" 1000 mm40.0"1 mm0.04" 1000 DISTANCE Q12..FF30 Fixed-Field Standard Chemical-Resistant EXCESS GAIN 100 10 mm0.4" 100 mm4.0" 1000 mm40.0"1 mm0.04" 1000 DISTANCE Standard Chemical-Resistant Q12..FF50 Fixed-Field Mode EXCESS GAIN Standard Models:

• Ø 0.4 mm spot size at 10 mm focus
• Ø 1.5 mm spot size at 15 mm cutoff Chemical-Resistant Models:
• Ø 0.4 mm spot size at 8 mm focus
• Ø 1.5 mm spot size at 13 mm cutoff * Using 18% gray test card: cutoff distance will be 95% of value shown. Using 6% black test card: cutoff distance will be 90% of value shown. Standard Models:
• Ø 0.5 mm spot size at 16 mm focus
• Ø 3.0 mm spot size at 30 mm cutoff Chemical-Resistant Models:
• Ø 0.5 mm spot size at 14 mm focus
• Ø 3.0 mm spot size at 28 mm cutoff * Using 18% gray test card: cutoff distance will be 90% of value shown. Using 6% black test card: cutoff distance will be 80% of value shown. Standard Models:
• Ø 0.5 mm spot size at 16 mm focus
• Ø 6.5 mm spot size at 50 mm cutoff * Using 18% gray test card: cutoff distance will be 80% of value shown. Using 6% black test card: cutoff distance will be 60% of value shown. Chemical-Resistant Models:
• Ø 0.5 mm spot size at 14 mm focus
• Ø 6.5 mm spot size at 48 mm cutoff * Using 18% gray test card: cutoff distance will be 70% of value shown. Using 6% black test card: cutoff distance will be 50% of value shown. Accessories Cordsets 3-Pin Threaded M8/Pico-Style Cordsets Model Length Style Dimensions Pinout (Female) PKG3M-2 2 m (6.56 ft) Straight ø 9.5 35 Typ. M8 x 1 4 3 1 1 = Brown 3 = Blue 4 = Black PKG3M-5 5 m (16.40 ft) PKG3M-7 7 m (22.97 ft) PKG3M-9 9 m (29.53 ft) PKG3M-10 10 m (32.81 ft) PKW3M-2 2 m (6.56 ft) Right-Angle ø 9.5 28 Typ. 20 Typ. M8 x 1 PKW3M-5 5 m (16.40 ft) PKW3M-9 9 m (29.53 ft) WORLD-BEAM® Q12 Series Sensor 6 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 119223 Rev. K

4-Pin Threaded M8/Pico-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) PKG4M-2 2 m (6.56 ft) Straight ø 9.5 35 Typ. M8 x 1 3 1 1 = Brown 2 = White 3 = Blue 4 = Black PKG4M-5 5 m (16.4 ft) PKG4M-9 9 m (29.5 ft) PKW4M-2 2 m (6.56 ft) Right Angle ø 9.5 28 Typ. 20 Typ. M8 x 1 PKW4M-5 5 m (16.4 ft) PKW4M-9 9 m (29.5 ft) 4-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) Brackets SMBQ12T

• Right-angle bracket
• 20-ga. 300 series stainless steel Ø3.34 X 2 X Ø3.2 Hole center spacing: A to B = 7.6 Hole size: A = 3.5 x 8.1, B=ø 3.2 SMBQ12A
• Adjustable right-angle bracket
• 20-ga. 300 series stainless steel Ø3.3 Ø3.2 Hole center spacing: A to B = 7.6 Hole size: A = 3.5 x 8.1, B=ø 3.2 Apertures Opposed-mode Q12 sensors (standard models only) may be fitted with apertures to narrow or shape the sensor’s effective beam to more closely match the size or profile of the objects being sensed. A common example is the use of “line” (or “slot”) type apertures to sense thread. Note: The use of apertures will reduce the sensing range (see table below). WORLD-BEAM® Q12 Series Sensor P/N 119223 Rev. K www.bannerengineering.com - Tel: + 1 888 373 6767 7

Model Description Pieces Reduced Sensor Range (Two Apertures Used) Circular APQ12-.5 0.5 mm (0.02 in) diameter 10 60 mm (2.4 in) APQ12-1 1 mm (0.04 in) diameter 10 190 mm (7.5 in) APQ12-1.5 1.5 mm (0.06 in) diameter 10 400 mm (15.7 in) APQ12-2 2 mm (0.08 in) diameter 10 725 mm (28.5 in) Horizontal Slot APQ12-.5H 0.5 mm (0.02 in) 10 350 mm (13.8 in) APQ12-1H 1 mm (0.04 in) 10 725 mm (28.5 in) Vertical Slot APQ12-.5V 0.5 mm (0.02 in) 10 450 mm (17.7 in) APQ12-1V 1 mm (0.04 in) 10 900 mm (35.4 in) Protective Jacket APQ12-4S 4 mm (0.16 in) square 10 2000 mm (78.7 in) APKQ12 Kit containing two of each aperture above 18 — Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the manufacturer. WORLD-BEAM® Q12 Series Sensor © Banner Engineering Corp. All rights reserved