PK25-D5-S15

PK25 CUI | Alldatasheet

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

rev. page date rev. page date DESCRIPTION: dc-dc converter 1 of 5 PART NUMBER: PK25

features

• industry standard pin out
• wide 2:1 input range
• fully isolated
• output voltage trimmable
• low ripple & noise
• over-current protection
• over-voltage protection
• output on/off control
• HI-POT tested
• constant switching frequency
• high efficiency
• compact size 2.56”x2.0”x0.375”
• 3 year warranty MODEL 1 output input output output output ripple & noise 2 efficiency power voltage voltage current current mV P-P (typ.) (max) (min) (max) PK25-D5-S5 16.0W 4.5-9VDC 5VDC 0A 3.2A 75 75% PK25-D5-S12 20.4W 4.5-9VDC 12VDC 0A 1.7A 120 77% PK25-D5-S15 21.0W 4.5-9VDC 15VDC 0A 1.4A 150 77% PK25-D5-D5 16.0W 4.5-9VDC ±5VDC 0A 1.6A 100/100 75% PK25-D5-D12 20.4W 4.5-9VDC ±12VDC 0A 0.85A 120/120 77% PK25-D5-D15 21.0W 4.5-9VDC ±15VDC 0A 0.7A 150/150 77% PK25-D12-S5 20.0W 9-18VDC 5VDC 0A 4.0A 75 85% PK25-D12-S12 25.2W 9-18VDC 12VDC 0A 2.1A 120 89% PK25-D12-S15 25.5W 9-18VDC 15VDC 0A 1.7A 150 89% PK25-D12-D5 20.0W 9-18VDC ±5VDC 0A 2.0A 100/100 80% PK25-D12-D12 25.2W 9-18VDC ±12VDC 0A 1.05A 120/120 86% PK25-D12-D15 25.5W 9-18VDC ±15VDC 0A 0.85A 150/150 86% PK25-D24-S3.3 13.2W 18-36VDC 3.3VDC 0A 4.0A 75 83% PK25-D24-S5 20.0W 18-36VDC 5VDC 0A 4.0A 75 85% PK25-D24-S12 25.2W 18-36VDC 12VDC 0A 2.1A 120 89% PK25-D24-S15 25.5W 18-36VDC 15VDC 0A 1.7A 150 90% PK25-D24-D5 20.0W 18-36VDC ±5VDC 0A 2.0A 100/100 82% PK25-D24-D12 25.2W 18-36VDC ±12VDC 0A 1.05A 120/120 86% PK25-D24-D15 25.5W 18-36VDC ±15VDC 0A 0.85A 150/150 86% PK25-D48-S3.3 13.2W 32-72VDC 3.3VDC 0A 4.0A 75 83% PK25-D48-S5 20.0W 32-72VDC 5VDC 0A 4.0A 75 85% PK25-D48-S12 25.2W 32-72VDC 12VDC 0A 2.1A 120 90% PK25-D48-S15 25.5W 32-72VDC 15VDC 0A 1.7A 150 90% PK25-D48-D5 20.0W 32-72VDC ±5VDC 0A 2.0A 100/100 82% PK25-D48-D12 25.2W 32-72VDC ±12VDC 0A 1.05A 120/120 86% PK25-D48-D15 25.5W 32-72VDC ±15VDC 0A 0.85A 150/150 86% NOTE: 1. All models (excluding the 5 V dc input, D5) are also available in an extended temperature range of -40°C~85°C. For these models, append “M” to the model number, e.g. PK25-D12-S3.3M. 2. Ripple & noise measured with a 20MHz bandwidth, off a 10uF electrolytic and a 0.1uF ceramic cap in parallel at the ouptut. Discontinued For more information, please visit the product page.

rev. page date DESCRIPTION: dc-dc converter 2 of 5 PART NUMBER: PK25 INPUT parameter conditions/description min nom max units input voltage range 4.5 5 9 VDC 9 12 18 VDC 18 24 36 VDC 36 48 72 VDC switching frequency constant 300 KHz OUTPUT parameter conditions/description min nom max units set point accuracy -2% +2% line regulation all models -0.5% +0.5% load regulation single output models -1.0% +1.0% dual output models (10% min. load) -2.5% +2.5% minimum load 0.0 Amps ripple and noise 20 MHz bandwidth 1.0% Vout mVpp PROTECTION parameter conditions/description min nom max units over-current continuous auto recovery 3 105% 135% over-voltage internally zener clamped 3 110% 140% NOTE: 3 continuous operation in a protected state may compromise long-term reliability. GENERAL parameter conditions/description min nom max units efficiency typical at full load 80% 89% dielectric withstand input/case, input/output, output/case 500 VAC insulation resistance at 500 VDC 100M Ohms agency standards approved to UL1950, EN60950, CISPR22, CE case material STS material flammability 94 V-0 weight 65 grams (2.29) (ounces) MTBF MIL-HDBK-217F 470k hours operating temperature regular models -20 +71 °C extended temperature models -40 +85 °C storage temperature -40 +105 °C humidity operating (non-condensing) 20% 90% RH washability not intended for aqueous wash Discontinued For more information, please visit the product page.

rev. page date DESCRIPTION: dc-dc converter 3 of 5 PART NUMBER: PK25 DIMENSIONS (mm) All dimensions are in inches (mm). TOP VIEW Outside edge Label IN OUT 0.2 (5.08) 0.6 (15.24) 0.2 (5.08) 7- 0.05(1.3) 0.3 (7.62) 0.3 (7.62) 0.2 (5.08) CL 2.2 (55.88) 0.2 (5.08) 0.6 (15.24) 0.2 (5.08) 0.19 (4.68) CL CL 0.04 (1.0) 0.18 (4.56) 1.6 (41.0) 2.2 (55.88) 0.37 (9.5) 2.56 (65.0) 2.0 (50.0) 0.3 (7.62) 0.3 (7.62) 0.2 (5.08) 0.19 (4.68) Single Output 1. +Vin 2. -Vin 3. CNT 4. +Vout 5. No pin 6. G nd 7. Trim Dual Output Pin Assignments 1. +Vin 2. -Vin 3. CNT 4. +Vout 5. C om 6. -Vout 7. Trim Discontinued For more information, please visit the product page.

function is not used, please short between CNT and -V input. FIGURE 4. CONNECTION EXAMPLE For more information, please visit the product page.