PK15-D48-S15

PK15 CUI | Alldatasheet

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

rev. page date rev. page date DESCRIPTION: dc-dc converter 1 of 4 PART NUMBER: PK15

features

• industry standard pin out
• wide 2:1 input range
• fully isolated
• low ripple & noise
• over-current protection
• output voltage variation (TRM)
• HI-POT tested
• constant switching frequency
• high efficiency
• compact size 1.8”x2.0”x0.375”
• 3 year warranty MODEL1 output input output output output ripple & noise 2 efficiency power voltage voltage current current mV P-P (typ.) (max) (min) (max) PK15-D5-S5 10.0W 4.5-7.2VDC 5VDC 0A 2.0A 50 78% PK15-D5-S12 12.0W 4.5-7.2VDC 12VDC 0A 1.0A 120 80% PK15-D5-S15 12.0W 4.5-7.2VDC 15VDC 0A 0.8A 150 80% PK15-D5-D5 10.0W 4.5-7.2VDC ±5VDC 0A 1.0A 120/120 80% PK15-D5-D12 12.0W 4.5-7.2VDC ±12VDC 0A 0.5A 150/150 80% PK15-D5-D15 12.0W 4.5-7.2VDC ±15VDC 0A 0.4A 150/150 80% PK15-D12-S5 12.0W 8-16.5VDC 5VDC 0A 2.4A 50 85% PK15-D12-S12 14.4W 8-16.5VDC 12VDC 0A 1.2A 120 88% PK15-D12-S15 15.0W 8-16.5VDC 15VDC 0A 1.0A 150 88% PK15-D12-D5 15.0W 8-16.5VDC ±5VDC 0A 1.5A 120/120 85% PK15-D12-D12 14.4W 8-16.5VDC ±12VDC 0A 0.6A 150/150 85% PK15-D12-D15 15.0W 8-16.5VDC ±15VDC 0A 0.5A 150/150 85% PK15-D24-S3.3 7.92W 18-32VDC 3.3VDC 0A 2.4A 50 84% PK15-D24-S5 12.0W 18-32VDC 5VDC 0A 2.4A 50 85% PK15-D24-S12 14.4W 18-32VDC 12VDC 0A 1.2A 120 88% PK15-D24-S15 15.0W 18-32VDC 15VDC 0A 1.0A 150 87% PK15-D24-D5 15.0W 18-32VDC ±5VDC 0A 1.5A 120/120 86% PK15-D24-D12 14.4W 18-32VDC ±12VDC 0A 0.6A 150/150 86% PK15-D24-D15 15.0W 18-32VDC ±15VDC 0A 0.5A 150/150 86% PK15-D48-S3.3 7.92W 32-63VDC 3.3VDC 0A 2.4A 50 78% PK15-D48-S5 12.0W 32-63VDC 5VDC 0A 2.4A 50 80% PK15-D48-S12 14.4W 32-63VDC 12VDC 0A 1.2A 120 83% PK15-D48-S15 15.0W 32-63VDC 15VDC 0A 1.0A 150 83% PK15-D48-D5 15.0W 32-63VDC ±5VDC 0A 1.5A 120/120 83% PK15-D48-D12 14.4W 32-63VDC ±12VDC 0A 0.6A 150/150 83% PK15-D48-D15 15.0W 32-63VDC ±15VDC 0A 0.5A 150/150 83% NOTE: 1. All models (excluding the 5 V dc input, D5) are also available in an extended temperature range of -40°C~85°C. For these models, append “M” to the model number, e.g. PK15-D12-S3.3M. 2. Ripple & noise measured with a 20MHz bandwidth, off a 10uF electrolytic and a 0.1uF ceramic cap in parallel at the ouptut. Discontinued For more information, please visit the product page.

rev. page date DESCRIPTION: dc-dc converter 2 of 4 PART NUMBER: PK15 INPUT parameter conditions/description min nom max units input voltage range 4.5 5 7.2 VDC 8 12 16.5 VDC 18 24 32 VDC 32 48 63 VDC switching frequency constant 300 KHz (CNT) remote on / off TTL compatible on: 0 to 1.2 VDC or short Vin-V off: 2.4 to 5.5 VDC or open OUTPUT parameter conditions/description min nom max units set point accuracy -2% +2% line regulation all models -0.5% +0.5% load regulation single output models -1.0% +1.0% dual output models (10% min. load) -2.5% +2.5% minimum load 0.0 Amps ripple and noise 20 MHz bandwidth 1.0% Vout mVpp PROTECTION parameter conditions/description min nom max units over-current continuous auto recovery 3 105% 135% over-voltage internally zener clamped 3 110% 140% NOTE: 3 continuous operation in a protected state may compromise long-term reliability. GENERAL parameter conditions/description min nom max units efficiency typical at full load 76% 87% dielectric withstand input/case, input/output, output/case 500 VAC insulation resistance at 500 VDC 100M Ohms agency standards approved to UL1950, EN60950, CISPR22, CE case material STS material flammability 94 V-0 weight 55 grams (1.94) (ounces) MTBF MIL-HDBK-217F 520k hours operating temperature regular models -20 +71 °C extended temperature models -40 +85 °C storage temperature -40 +105 °C humidity operating (non-condensing) 20% 90% RH washability not intended for aqueous wash Discontinued For more information, please visit the product page.

rev. page date DESCRIPTION: dc-dc converter 3 of 4 PART NUMBER: PK15 DIMENSIONS (mm) Single Output 1. +Vin 2. -Vin 3. CNT 4. +Vout 5. No pin 7. Trim All dimensions are in inches (mm). Dual Output 1. +Vin 2. -Vin 3. CNT 4. +Vout 5. Com 6. -Vout 7. Tri m 6. -Vout Pin Assignments TOP VIEW Outside edge Label IN OUT 0.2 (5.08) 0.6 (15.24) 0.2 (5.08) 7- 0.05(1.3) 0.3 (7.62) 0.3 (7.62) 0.2 (5.08) CL 0.2 (5.08) 0.6 (15.24) 0.2 (5.08) 0.19 (4.68) CL CL 0.04 (1.0) 0.37 (9.5) 2.0 (50.0) 0.3 (7.62) 0.3 (7.62) 0.2 (5.08) 0.19 (4.68) 1.4 (35.56) 1.8 (45.0) 1.4 (35.56) Discontinued For more information, please visit the product page.