DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor Rev.1502 PIT03020 TYPE
- FEATURE 1. Shielded construction 2. Frequency range up to 5MHz, Low DCR(uH),Low Buzz Noise
- Applications 1. Notebook, server application, High current power supplier
- Shape and Dimension ●Schematics and Land Patterns(mm) G=4.10m/m ; H=1.45m/m ; I=1.90m/m
- Specification P/N L (μH) RDC (mΩ) Typical RDC (mΩ)Max Isat (A) Irms (A) PIT03020-3R3□ 3.3 125 145 3.5 3.0 PIT03020-4R7□ 4.7 172 200 3.0 2.6 PIT03020-5R6□ 5.6 205 238 2.6 2.2 PIT03020-6R8□ 6.8 260 300 2.2 1.9 PIT03020-8R2□ 8.2 340 390 1.9 1.6 PIT03020-100□ 10 366 422 1.6 1.4 Note1. Measurement frequency of Inductance value : at 100KHz, 1V Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. Isat: DC current at which the inductance drops 30%(typ) from its value without current Note4. Irms: Average current for 40℃ temperature rise from 25℃ ambient(typical) Note5. Inductance tolerance□: M: ±20% ; N: ±30% Note6. Packing: reel ; Quantity: 3000 Piece Note7. Inductance: 2R2=2.2uH；Marking: 2.2
FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor Rev.1502
- Typical Electrical Curve: Inductance VS Isat , Irms VS TEMP.
FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor Rev.1502
FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor Rev.1502 GENERAL CHARACTERISTICS 1. Operating temperature range: -55 TO +125℃(Includes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Ywithstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute bet ween coil and core. 6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃). 7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ± 2℃and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow) 11. Storage environment: Storage condition: Temperature Range: 10℃ ~ 35℃ (Generally: 21℃ ~ 31℃) , Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range: -35℃ ~ 85℃ , Humidity Range: 50% ~ 95% RH 12. Use components within 6 months. If 6 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245 ℃ Peak 230 ℃ 170 ± 10℃ ,6 0-120S 300 250 200 150 100 T( ℃ ) T(s) 300240180120600 Lead-free the recom m ended refl ow condi ti on