PIR21844

IR2184PBF IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 24

Technical content

IR2184(4)(S) & (PbF) Typical Connection HALF-BRIDGE DRIVERFeatures

• Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune
• Gate drive supply range from 10 to 20V
• Undervoltage lockout for both channels
• 3.3V and 5V input logic compatible
• Matched propagation delay for both channels
• Logic and power ground +/- 5V offset.
• Lower di/dt gate driver for better noise immunity
• Output source/sink current capability 1.4A/1.8A
• Also available LEAD-FREE (PbF) IR21844 IR2184 www.irf.com 1 Data Sheet No. PD60174 revG /g86/g67/g67 /g86/g66 /g86/g83 /g72/g79 /g76/g79/g67/g79/g77 /g73/g78 /g83/g68/g83/g68 /g73/g78 /g117/g112/g32/g116/g111/g32/g54/g48/g48/g86 /g84/g79 /g76/g79/g65/g68 /g86/g67/g67 /g73/g78 /g117/g112/g32/g116/g111/g32/g54/g48/g48/g86 /g84/g79 /g76/g79/g65/g68 /g86/g67/g67 /g86/g66 /g86/g83 /g72/g79 /g76/g79 /g67/g79/g77 /g73/g78 /g68/g84 /g86/g83/g83 /g83/g68 /g86/g67/g67 /g83/g68 /g86/g83/g83 /g82/g68/g84 (Refer to Lead Assignments for correct configuration). This/These diagram(s) show electrical connections only. Please refer to our Application Notes and DesignTips for proper circuit board layout. Packages 14-Lead PDIP IR21844 8-Lead SOIC IR2184S 14-Lead SOIC IR21844S 8-Lead PDIP IR2184

Description

The IR2184(4)(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Pro- prietary HVIC and latch immune CMOS technologies enable rugge- dized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts. /g80/g97/g114/g116/g32/g73/g110/g112/g117/g116/g32 /g108/g111/g103/g105/g99/g32 /g67/g114/g111/g115/g115/g45 /g99/g111/g110/g100/g117/g99/g116/g105/g111/g110/g32/g32 /g112/g114/g101/g118/g101/g110/g116/g105/g111/g110/g32 /g108/g111/g103/g105/g99/g32 /g68/g101/g97/g100/g45/g84/g105/g109/g101/g32 /g71/g114/g111/g117/g110/g100/g32/g80/g105/g110/g115/g32 /g84/g111/g110/g47/g84/g111/g102/g102/g32 /g50/g49/g56/g49/g32 /g67/g79/g77/g32 /g50/g49/g56/g49/g52/g32/g72/g73/g78/g47/g76/g73/g78/g32 /g110/g111/g32 /g110/g111/g110/g101/g32/g86/g83/g83/g47/g67/g79/g77/g32/g49/g56/g48/g47/g50/g50/g48/g32/g110/g115/g32 /g50/g49/g56/g51/g32 /g73/g110/g116/g101/g114/g110/g97/g108/g32/g53/g48/g48/g110/g115/g32 /g67/g79/g77/g32 /g50/g49/g56/g51/g52/g32/g72/g73/g78/g47/g76/g73/g78/g32 /g121/g101/g115/g32/g80/g114/g111/g103/g114/g97/g109/g32/g48/g46/g52/g32/g126/g32/g53/g32/g117/g115/g32 /g86/g83/g83/g47/g67/g79/g77/g32/g49/g56/g48/g47/g50/g50/g48/g32/g110/g115/g32 /g50/g49/g56/g52/g32 /g73/g110/g116/g101/g114/g110/g97/g108/g32/g53/g48/g48/g110/g115/g32 /g67/g79/g77/g32 /g50/g49/g56/g52/g52/g32/g73/g78/g47/g83/g68/g32 /g121/g101/g115/g32/g80/g114/g111/g103/g114/g97/g109/g32/g48/g46/g52/g32/g126/g32/g53/g32/g117/g115/g32 /g86/g83/g83/g47/g67/g79/g77/g32/g54/g56/g48/g47/g50/g55/g48/g32/g110/g115/g32 IR2181/IR2183/IR2184 Feature Comparison

IR2184(4)(S) & (PbF) 2 www.irf.com Symbol Definition Min. Max. Units VB High side floating absolute voltage -0.3 625 VS High side floating supply offset voltage V B - 25 V B + 0.3 VHO High side floating output voltage V S - 0.3 V B + 0.3 VCC Low side and logic fixed supply voltage -0.3 25 VLO Low side output voltage -0.3 V CC + 0.3 DT Programmable dead-time pin voltage (IR21844 only) V SS - 0.3 V CC + 0.3 VIN Logic input voltage (IN & SD) V SS - 0.3 V SS + 10 VSS Logic ground (IR21844 only) V CC - 25 V CC + 0.3 dVS/dt Allowable offset supply voltage transient — 50 V/ns (8-lead SOIC) — 0.625 (14-lead PDIP) — 1.6 (14-lead SOIC) — 1.0 RthJA Thermal resistance, junction to ambient (8-l ead PDIP) — 125 (8-lead SOIC) — 200 (14-lead PDIP) — 75 (14-lead SOIC) — 120 TJ Junction temperature — 150 TS Storage temperature -50 150 TL Lead temperature (soldering, 10 seconds) — 300 V °C/W W Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Recommended Operating Conditions The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset rating are tested with all supplies biased at 15V differential. Note 1: Logic operational for VS of -5 to +600V. Logic state held for VS of -5V to -VBS. (Please refer to the Design Tip DT97-3 for more details). Note 2: IN and SD are internally clamped with a 5.2V zener diode. VB High side floating supply absolute voltage V S + 10 V S + 20 VS High side floating supply offset voltage Note 1 600 VHO High side floating output voltage V S VB VCC Low side and logic fixed supply voltage 10 20 VLO Low side output voltage 0 V CC VIN Logic input voltage (IN & SD) V SS VSS + 5 DT Programmable dead-time pin voltage (IR21844 only) V SS VCC VSS Logic ground (IR21844 only) -5 5 TA Ambient temperature -40 125 °C V Symbol Definition Min. Max. Units

IR2184(4)(S) & (PbF) www.irf.com 3 Dynamic Electrical Characteristics VBIAS (VCC, VBS) = 15V, VSS = COM, CL = 1000 pF, TA = 25°C, DT = VSS unless otherwise specified. Symbol Definition Min. Typ. Max. Units Test Conditions ton Turn-on propagation delay — 680 900 V S = 0V toff Turn-off propagation delay — 270 400 V S = 0V or 600V tsd Shut-down propagation delay — 180 270 MTon Delay matching, HS & LS turn-on — 0 90 MToff Delay matching, HS & LS turn-off — 0 40 tr Turn-on rise time — 40 60 V S = 0V tf Turn-off fall time — 20 35 V S = 0V DT Deadtime: LO turn-off to HO turn-on(DT LO-HO) & 280 400 520 RDT= 0 HO turn-off to LO turn-on (DT HO-LO) 456 µsec RDT = 200k MDT Deadtime matching = DT LO - HO - DTHO-LO — 0 50 RDT=0 — 0 600 RDT = 200k nsec nsec Static Electrical Characteristics VBIAS (VCC, VBS) = 15V, VSS = COM, DT= VSS and TA = 25°C unless otherwise specified. The VIL, VIH and IIN parameters are referenced to VSS /COM and are applicable to the respective input leads: IN and SD. The VO, IO and Ron parameters are referenced to COM and are applicable to the respective output leads: HO and LO. Symbol Definition Min. Typ. Max. Units Test Conditions VIH Logic “1” input voltage for HO & logic “0” for LO 2.7 — — V CC = 10V to 20V VIL Logic “0” input voltage for HO & logic “1” for LO — — 0.8 V CC = 10V to 20V VSD,TH+ SD input positive going threshold 2.7 —— V CC = 10V to 20V VSD,TH- SD input negative going threshold —— 0.8 VCC = 10V to 20V VOH High level output voltage, VBIAS - VO — — 1.2 I O = 0A VOL Low level output voltage, VO — — 0.1 I O = 0A ILK Offset supply leakage current — — 50 V B = VS = 600V IQBS Quiescent VBS supply current 20 60 150 V IN = 0V or 5V IQCC Quiescent VCC supply current 0.4 1.0 1.6 mA V IN = 0V or 5V IIN+ Logic “1” input bias current — 25 60 IN = 5V, SD = 0V IIN- Logic “0” input bias current — — 1.0 IN = 0V, SD = 5V VCCUV+ VCC and VBS supply undervoltage positive going 8.0 8.9 9.8 VBSUV+ threshold VCCUV- VCC and VBS supply undervoltage negative going 7.4 8.2 9.0 VBSUV- threshold VCCUVH Hysteresis 0.3 0.7 — VBSUVH IO+ Output high short circuit pulsed current 1.4 1.9 — V O = 0V, PW ≤ 10 µs IO- Output low short circuit pulsed current 1.8 2.3 — V O = 15V, PW ≤ 10 µs V µA µA V A

IR2184(4)(S) & (PbF) 4 www.irf.com Functional Block Diagrams 2184 SD UV DETECT DELAY IN VS HO VB PULSE FILTERHV LEVEL SHIFTER R R S Q UV DETECT PULSE GENERATOR VSS/COM LEVEL SHIFT VSS/COM LEVEL SHIFT +5V DEADTIME COM LO VCC 21844 SD UV DETECT DELAY IN DT VSS VS HO VB PULSE FILTERHV LEVEL SHIFTER R R S Q UV DETECT PULSE GENERATOR VSS/COM LEVEL SHIFT VSS/COM LEVEL SHIFT +5V DEADTIME COM LO VCC

IR2184(4)(S) & (PbF) www.irf.com 5 14-Lead PDIP 14-Lead SOIC IR21844 IR21844S Lead Assignments 8-Lead PDIP 8-Lead SOIC Lead Definitions Symbol Description IN Logic input for high and low side gate driver outputs (HO and LO), in phase with HO (referenced to COM for IR2184 and VSS for IR21844) SD Logic input for shutdown (referenced to COM for IR2184 and VSS for IR21844) DT Programmable dead-time lead, referenced to VSS. (IR21 844 only) VSS Logic Ground (21 844 only) VB High side floating supply HO High side gate drive output VS High side floating supply return VCC Low side and logic fixed supply LO Low side gate drive output COM Low side return IR2184 IR2184S IN SD COM LO VB HO VS VCC IN SD COM LO VB HO VS VCC IN SD VSS DT COM LO VCC VB HO VS IN SD VSS DT COM LO VCC VB HO VS

Figure 36. IR21814s vs. Frequency (IRFPE50),

IR2184(4)(S) & (PbF) 22 www.irf.com 01-6014 01-3003 01 (MS-001AB)8-Lead PDIP 01-6027 01-0021 11 (MS-012AA)8-Lead SOIC D B E A e6X H 0.25 [.010] A 4312 4. OUTLI NE CONFORMS TO JEDEC OUTLI NE MS-012AA. NOTES: 1. DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994. 2. CONTROLLI NG DI MENSI ON: MI LLI METER 3. DI MENSI ONS ARE SHOWN I N MI LLI METERS [I NCHES]. K x 45° 8X L 8X c y FOOTPRI NT 8X 0.72 [.028] 6.46 [.255] 5 DI MENSI ON DOES NOT I NCLUDE MOLD PROTRUSI ONS. 6 DI MENSI ON DOES NOT I NCLUDE MOLD PROTRUSI ONS. MOLD PROTRUSIONS NOT TO EXCEED 0.25 [.010].

7 DI MENSI ON I S THE LENGTH OF LEAD FOR SOLDERI NG TO

A SUBSTRATE. MOLD PROTRUSIONS NOT TO EXCEED 0.15 [.006]. 0.25 [.010] CAB A A18X b C 0.10 [.004] D E y b A H K L .189 .1497 .013 .050 BASIC .0532 .0040 .2284 .0099 .016 .1968 .1574 .020 .0688 .0098 .2440 .0196 .050 4.80 3.80 0.33 1.35 0.10 5.80 0.25 0.40

1.27 BASIC

5.00 4.00 0.51 1.75 0.25 6.20 0.50 1.27 MI N MAX MI LLI METERSIN C H E S MI N MAXDI M e c .0075 .0098 0.19 0.25 .025 BASIC 0.635 BASIC

IR2184(4)(S) & (PbF) www.irf.com 23 01-6019 01-3063 00 (MS-012AB)14-Lead SOIC (narrow body) 01-6010 01-3002 03 (MS-001AC)14-Lead PDIP

IR2184(4)(S) & (PbF) 24 www.irf.com Basic Part (Non-Lead Free) 8-Lead PDIP IR2184 order IR2184 8-Lead SOIC IR2184S order IR2184S 14-Lead PDIP IR21844 order IR21844 14-Lead SOIC IR21844 order IR21844S Leadfree Part 8-Lead PDIP IR2184 order IR2184PbF 8-Lead SOIC IR2184S order IR2184SPbF 14-Lead PDIP IR21844 order IR21844PbF 14-Lead SOIC IR21844 order IR21844SPbF ORDER INFORMATION LEADFREE PART MARKING INFORMATION Lead Free Released Non-Lead Free Released Part number Date code IRxxxxxx YWW? ?XXXXPin 1 Identifier IR logo Lot Code (Prod mode - 4 digit SPN code) Assembly site code Per SCOP 200-002 P ? MARKING CODE Thisproduct has been designed and qualified for the industrial market. Qualification Standards can be found on IR’s Web Site http://www.irf.com Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 4/4/2006