PIP AITSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIP

  • FEATURE 1. Low profile and Compact Size 2. Low DC resistance 3. Open magnetic circuit construction
  • APPLICATION 1. LCD panels , DC/DC Converters 2. Digital camera , PDA 3. Portable communication equipment 4. Notebook, Server PIP3015 PIP3020 PIP4032 PIP5020 PIP5045 PIP7030 PIP7050 PIP10040 PIP10050
  • ORDERING INFORMATION PIP3015 -1R0 T PN Inductance M:±20% K:±10%
  • SHAPE AND DIMENSION ●SCHEMATICS AND LAND PATTERNS(mm) PIP3015 PIP3020 PIP4032 PIP5020 PIP5045 PIP7030 PIP7050 PIP10040 PIP10050

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIP

  • SPECIFICATION Dimension in mm TYPE A B C E G F Note1. Measurement frequency of Inductance value: at 100kHz, 0.25V Note2. Measurement ambient temperature of L, DCR and IDC: at 25°C Note3. IDC : This indicates the value of current when the inductances is 10% lower than its initial value at D.C. superimposition at D.C. superimposition (TA=20°C) Note4. Inductance tolerance: M: ±20% ; K: ±10% Note5. Ordering Code: PIP5045, Main Inductance: 100(10uH), Tolerance: M (±20%)

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIP

  • ELECTRICAL CHARACTERISTICS PART NUMBER Inductance (uH) PIP3015 PIP3020 PIP4032 1R5 1.5 2R7 2.7 0.052 / 2.43 3R9 3.9 0.076 / 1.98 5R6 5.6 0.101 / 1.60 6R3 6.3 8R0 8.0 8R2 8.2 0.132 / 1.26 120 12 0.210 / 1.05 180 18 0.500 / 0.80 0.338 / 0.84 270 27 0.912 / 0.70 0.522 / 0.71 390 39 0.587 / 0.59 560 56 0.937 / 0.50 820 82 2.319 / 0.20 1.345 / 0.45 121 120 4.084 / 0.17 1.800 / 0.43 181 180 5.35 / 0.075 3.200 / 0.38 221 220 6.669 / 0.07 3.400 / 0.36 331 330 8.684 / 0.06 5.300 / 0.28 471 470 13.091 / 0.06 6.800 / 0.21 681 680 17.095 / 0.06 10.00 / 0.18 821 820 13.40 / 0.15 102 1000

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIP PART NUMBER Inductance (uH) PIP5020 PIP0504 PIP7030 PIP7050 2R0 2.0 3R0 3.0 3R9 3.9 5R6 5.6 0.054 / 2.31 6R3 6.3 8R0 8.0 471 470 9.282 / 0.10 1.960 / 0.34 681 680 14.040 / 0.10 821 820 102 1000

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIP PART NUMBER Inductance (uH) PIP10040 PIP10050 1R0 1.0 2R0 2.0 2R7 2.7 3R0 3.0 3R3 3.3 3R9 3.9 5R6 5.6 0.040 / 5.00 6R3 6.3 6R8 6.8 8R0 8.0 8R2 8.2 100 10 0.053 / 2.38 0.060 / 2.60 120 12 0.061 / 2.13 0.070 / 2.45 150 15 0.070 / 1.87 0.080 / 2.27 180 18 0.081 / 1.73 0.090 / 2.15 220 22 0.088 / 1.60 0.100 / 1.95 270 27 0.100 / 1.44 0.110 / 1.76 330 33 0.120 / 1.26 0.120 / 1.50 390 39 0.151 / 1.20 0.140 / 1.37 470 47 0.170 / 1.10 0.170 / 1.28 560 56 0.199 / 1.01 0.190 / 1.17 680 68 0.223 / 0.91 0.220 / 1.11 820 82 0.252 / 0.85 0.250 / 1.00 101 100 0.344 / 0.74 0.350 / 0.97 121 120 0.396 / 0.69 0.400 / 0.89 151 150 0.544 / 0.61 0.470 / 0.78 181 180 0.621 / 0.56 0.630 / 0.72 221 220 0.721 / 0.53 0.730 / 0.66 331 330 1.100 / 0.42 1.150 / 0.52 471 470 1.526 / 0.35 1.480 / 0.42 681 680 2.250 / 0.28 821 820 2.550 / 0.24 102 1000

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIP

  • GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 105°C (Includes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has external defects. 3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 10. 0N 10 sec. 4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Inductance coefficient (0~2,000) x10-6/°C (-25~+80°C). 7. Humidity characteristics (Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% Relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three, orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G), shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds. 11. Storage environment Storage condition: Temperature Range: 10°C ~ 35°C (Generally: 21°C ~ 31°C) Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) Transportation condition: Temperature Range: -35°C ~ 85°C, Humidity Range: 50% ~ 95% RH 12. Use components within 12 months. If 12 months or more have elapsed, check soldarability before use. 13. Reflow profile recommend: Lead - free heat endurance test Lead-free the recommended reflow condition