PI4IOE5V6416

Online Datasheet

Read PI4IOE5V6416 online.

Document overview

Manufacturer or author: Diodes Incorporated
PDF pages: 19

Technical content

Features

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

PI4IOE5V6416 www.diodes.com November 2024 Document Number DS40821 Rev 4-2 5 © 2024 Copyright Diodes Incorporated. All Rights Reserved. PI4IOE5V6416 Maximum Ratings Recommended Operating Conditions Symbol Parameter Min. Typ. Max. Unit VDD(I2C-b us) I2C-bus supply voltage 1.65 5.5 V VDD(P) GPIO port supply voltage 1.65 5.5 V VIN Input voltage on ADDR, P1_7 to P0_0 0 VDD(P) V Input voltage on SCL, SDA, RESET 0 VDD(I2C_BUS) V IOH High-Level Output Current 10 mA IOL Low-Level Output Current 25 mA Static Characteristics VDD(I2C_bus) = 1.65V to 5.5V; Temp = -40°C to +85°C; unless otherwise specified. Typical values are at Temp = 25°C. Symbol Parameter Condition Min. Typ. Max. Unit Power supply IDD Supply current Standby mode I/O = inputs; fSCL = 0kHz VDD(P) = 3.6-5.5V 1.5 7 μA Standby mode I/O = inputs; fSCL = 400kHz VDD(P) = 3.6-5.5V 10 25 Active mode I/O = inputs; fSCL = 400kHz, continuous register read VDD(P) = 3.6-5.5V 60 125 VDD(P) = 1.65-2.3V 20 45 VPOR Power-on reset voltage Rising 1.1 1.4 V Falling 0.5 Td(rst ) Reset time Time of VDD(P) drop to VPOR(min) − 50mV for successful Power-on reset 1 μs Input SCL, input/output SDA VIL Low level input voltage -0.5 0.3 VDD(I2C-bus) V VIH High level input voltage 0.7 VDD(I2C-bus) 5.5 V IOL SDA Low level output current VOL = 0.4V 3 mA Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

PI4IOE5V6416 www.diodes.com November 2024 Document Number DS40821 Rev 4-2 6 © 2024 Copyright Diodes Incorporated. All Rights Reserved. PI4IOE5V6416 Symbol Parameter Condition Min. Typ. Max. Unit IL Leakage current VIN = VDD(I2C_bus) or VSS -1 1 μA Ci Input capacitance VIN = VSS 7 8 pF Interrupt INT IOL Low level output current VOL= 0.4V 3 mA Co Output capacitance 7 8 pF Select inputs ADDR and RESET VIL RESET Low level input voltage -0.5 0.3 VDD(I2C-bus) V ADDR Low level input voltage -0.5 0.3 VDD(P) VIH RESET High level input voltage 0.7 VDD(I2C-bus) 5.5 V ADDR High level input voltage 0.7 VDD(P) 5.5 IL Input leakage current -1 1 μA Ci Input capacitance 6 7 pF I/Os VIL Low-level input voltage P0 – P7 -0.5 +0.3* VDD(P) V VIH High-level input voltage P0 – P7 0.7*VDD(P) 5.5 V VOH High-level output voltage IOH = -2.5mA; CCX.X=00b IOH = -5mA; CCX.X=01b IOH = -7.5mA; CCX.X=10b IOH = -10mA; CCX.X=11b VDD(P) = 1.65V 1.1 V VDD(P) = 2.3V 1.7 VDD(P) = 3V 2.5 VDD(P) = 4.5V 4.0 VOL Low-level output voltage IOL = 2.5mA; CCX.X=00b IOL = 5mA; CCX.X=01b IOL = 7.5mA; CCX.X=10b IOL = 10mA; CCX.X=11b VDD(P) = 1.65V 0.5 V VDD(P) = 2.3V 0.3 VDD(P) = 3V 0.25 VDD(P) = 4.5V 0.2 IIH High-level input current P port; VI = VDD(P) 1 μA IIL Low-level input current P port; VI = VSS 1 μA Rpu(int) Internal pull-up resistance Input/Output 50 100 150 kΩ Rpd(int) Internal pull-down resistance Input/Output 50 100 150 kΩ

PI4IOE5V6416 www.diodes.com November 2024 Document Number DS40821 Rev 4-2 7 © 2024 Copyright Diodes Incorporated. All Rights Reserved. PI4IOE5V6416 Dynamic Characteristics Symbol Parameter Standard Mode I2C Fast Mode I2C Unit Min Max Min Max fSCL SCL clock frequency 0 100 0 400 kHz tBUF Bus free time between a STOP and START condition 4.7 1.3 μs tHD;STA Hold time (repeated) START condition 4.0 0.6 μs tSU;STA Set-up time for a repeated START condition 4.7 0.6 μs tSU;STO Set-up time for STOP condition 4.0 0.6 μs tVD;ACK Data valid acknowledge time 3.45 0.9 μs tHD;DAT Data hold time 0 0 ns tVD;DAT Data valid time 3.45 0.9 ns tSU;DAT Data set-up time 250 100 ns tLOW LOW period of the SCL clock 4.7 1.3 μs tHIGH HIGH period of the SCL clock 4.0 0.6 μs tf Fall time of both SDA and SCL signals 300 20 x (VDD/5. 5V) 300 ns tr Rise time of both SDA and SCL signals 1000 20 300 ns tSP Pulse width of spikes that must be suppressed by the input filter 0 50 0 50 ns Interrupt timing tV(INT) Valid time on pin INT 1 1 μs tRST(INT) Reset time on pin INT 1 1 μs Reset timing tw(rst) Reset pulse width 30 30 ns trst_rec Reset recovery time 200 200 ns trst Reset time 600 600 ns P Port timing tV(Q) Data output valid time (from SCL to P Port) 400 400 ns tSU(D) Data input setup time (from P Port to SCL) 0 0 ns th(D) Data input hold time (from P Port to SCL) 300 300 ns

Document Number DS40821 Rev 4-2 10 © 2024 Copyright Diodes Incorporated. All Rights Reserved. Table 2. Input port 0 register (address 00h) Table 3. Input port 1 register (address 01h) Table 4. Output port 0 register (address 02h) Table 5. Output port 1 register (address 03h) Table 6. Polarity inversion port 0 register (address 04h)

Document Number DS40821 Rev 4-2 11 © 2024 Copyright Diodes Incorporated. All Rights Reserved. Table 7. Polarity inversion port 1 register (address 05h) Table 8. Configuration port 0 register (address 06h) Table 9. Configuration port 1 register (address 07h) Table 10. Current control port 0 register (address 40h) Table 11. Current control port 0 register (address 41h) Table 12. Current control port 1 register (address 42h) Table 13. Current control port 1 register (address 43h)

Document Number DS40821 Rev 4-2 12 © 2024 Copyright Diodes Incorporated. All Rights Reserved. Table 14. Input latch port 0 register (address 44h) Table 15. Input latch port 1 register (address 45h) Table 16. Pull-up/pull-down enable port 0 register (address 46h)

Document Number DS40821 Rev 4-2 13 © 2024 Copyright Diodes Incorporated. All Rights Reserved. Table 17. Pull-up/pull-down enable port 1 register (address 47h) Table 18. Pull-up/pull-down selection port 0 register (address 48h) Table 19. Pull-up/pull-down selection port 1 register (address 49h) Table 20. Interrupt mask port 0 register (address 4Ah) bit description Table 21. Interrupt mask port 1 register (address 4Bh) bit description

Document Number DS40821 Rev 4-2 14 © 2024 Copyright Diodes Incorporated. All Rights Reserved. Table 22. Interrupt status port 0 register (address 4Ch) bit description Table 23. Interrupt status port 1 register (address 4Dh) bit description Table 24. Output port configuration register (address 4Fh)

Ordering Information

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. E = Pb-free and Green 5. X suffix = Tape/Reel

PI4IOE5V6416 www.diodes.com November 2024 Document Number DS40821 Rev 4-2 19 © 2024 Copyright Diodes Incorporated. All Rights Reserved. PI4IOE5V6416 IMPORTANT NOTICE 1. DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON -INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes’ products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any prod uct described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes’ products. Diodes’ products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes’ products for their intended applications, (c) ensuring their applications, which incorporate Diodes’ products, comply the applicable legal and regulatory requirements as well as safety and functional -safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfunction prevention, and ap propriate treatment for aging degradation) to minimize the risks associated with their applications. 3. Diodes assumes no liability for any application -related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent ap plications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes’ products are provided subject to Diodes’ Standard Terms and Conditions of Sale ( https://www.diodes.com/about/company/terms-and- conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. 6. Diodes’ products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sa le is prohibited under any applicable laws and regulations. Should customers or users use Diodes’ products in contravention of any applicable laws o r regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or penalti es arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless against any a nd all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicab le laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may c ontain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this document is erro r-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion her eof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. 9. This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/terms-and-conditions/important- notice The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. All other trademarks are the property of their respective owners. © 2024 Diodes Incorporated. All Rights Reserved. www.diodes.com

Product Information

PI4IOE5V6416 specifications and overview.

Summary

Low-Voltage Translating 16-bit I2C-bus I/O Expander September 2018

Description

Low-Voltage Translating 16-bit I2C-bus I/O Expander September 2018

Source title PI4IOE5V6416 Datasheet(PDF) - Diodes Incorporated

Related Parts

More parts from the same family.

Browse manufacturer