PI3DPX1235Q_V01 DIODES | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
diodes.com Announcement New Product The DIODES Advantage Automotive-compliant 13.5Gbps USB Type-C USB 3.2/DP 2.1 UHRB13.5 6:4 active crossbar mux for routing/multiplexing USB-C and/or DP signals. The PI3DPX1235Q is a DisplayPort (DP) 2.1 UHBR13.5/USB 3.2 Gen 2, 6:4 active mux linear ReDriver with data rates up to 13.5Gbps for USB Type-C automotive applications. It is compliant to the VESA DP Alt 2.1 UHBR13.5 and USB 3.2 Gen 2 industry standard. It multiplexes either just one lane of USB 3.2, one lane of USB 3.2 and two channels of DP 2.1 UHBR13.5, or four channels of DP 2.1 UHBR13.5 to the USB Type-C connector. In addition, the AUX± channels are also multiplexed to the USB Type-C connector. The DP 2.1 and USB 3.2 Gen 2 signals’ signal integrity can be easily adjusted using I2C control to amend the equalization, output swing linearity, and flat gain values. This allows the DP/USB 10Gbps signal performance to be optimized over a wide variety of physical media by reducing inter- symbol interference jitters. Non-blocking linear equalization does not block the receiver DFE’s adaptive channel controls, enabling support of DisplayPort Transparent Link Training (LT) without dependency of the DP-Aux channels listener. It is available in the 40-pin W-QFN6040-40 (ZLB40) with a 4mm x 6mm footprint. UHBR13.5 6:4 Active-Crossbar Mux Improves Interconnectivity in Automotive USB 3.2/DP 2.1 USB Type-C® Connections PI3DPX1235Q ▪ Supports the Latest USB 3.2 Spec with Three Operating Modes:
- 1-Port 13.5Gbps USB 3.2
- 1-Port USB 3.2 + 2-Channel DisplayPort 2.1
- 4-Channel DisplayPort 2.1 Provides flexible USB Type-C, USB 3.2/DP-Alt Mode Operation ▪ Programmable Receiver-Side CTLE, Output-Side Flat Gain, and Swing Linearity Settings Extends PCB trace lengths while reducing signal latency ▪ Auto Power-Saving Modes for Both USB and DP Enables USB U2/U3 and DP D3 power-saving modes with built-in AUX listener ▪ Configuration and Performance Set via I2C Allows flexible control and setup for ease of use ▪ Qualified to AEC-Q100 Grade 2 Supports a -40ºC to +105ºC ambient operating temperature
Applications
USB and/or DP routing in: ▪ Smart cockpits ▪ Rear seat entertainment March 2025 Automotive-compliant - AEC qualified, manufactured in facilities certified to IATF 16949, supporting PPAP documents. The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. ReDriver is a trademark of Diodes Incorporated. All other trademarks are the property of their respective owners. © 2025 Copyright Diodes Incorporated. All Rights Reserved.
diodes.com Typical Application March 2025 PI3DPX1235Q Automotive-Compliant USB Type-C ReDriver Portfolio
Ordering Information
(Only Automotive Supports PPAP) Package Moisture Sensitivity Packing Quantity Carrier PI3DPX1235Q2ZLBEX Automotive W-QFN6040-40 (ZLB40) MSL-1 3,500 13” Tape & Reel Part Number Operation Voltage Input Channels Data Rate Output Channels Output Swing Max Programming Interface(s) Operation Temperature Packages V Gbps mV °C PI3DPX1235Q 3.3 6/4 13.5 4 1200 I2C -40 to +105 W-QFN6040-40 (ZLB40) PI3DPX1225Q 3.3 6/4 10 4 1200 I2C -40 to +85 W-QFN6040-40 PI3DPX1207Q 3.3 4 10 4 1200 I2C or Pin-Strapping -40 to +85 42-pin TQFN