PI3CLS9606 | DigiCamel IC Datasheet

Online Datasheet

Read PI3CLS9606 online.

Features

Document overview

PDF pages: 14

Technical content

Features

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen - and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 2 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 Block Diagram Function Table OE Function H An = Bn L Disconnect

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 3 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 Pin Configuration DFN1410-8L (Top View) Pin Description Pin# Name Description

1 B2 Data input or output (referenced to VCCB)

2 GND Supply ground (0V)

3 VCCA Port A supply voltage (0.72V to 1.98V)

4 A2 Data input or output (referenced to VCCA)

5 A1 Data input or output (referenced to VCCA)

6 OE Output enable input (active HIGH, referenced to VCCA)

7 VCCB Port B supply voltage (0.72V to 1.98V)

8 B1 Data input or output (referenced to VCCB)

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 4 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 Maximum Ratings Recommended Operation Conditions Symbol Parameter Conditions Min Max Unit VCCA Supply voltage A VCCA ≤ VCCB 0.72 1.98 V VCCB Supply voltage B VCCA ≤ VCCB 0.72 1.98 V VI Input voltage A port, B port and OE 0 1.98 V VO Output voltage Power-down or 3 -state mode; VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V A port 0 1.98 V B port 0 1.98 V Tamb Ambient temperature -40 +125 °C TJ Junction temperature[2] -40 +125 °C Δt/ΔV Input transition rise and fall rate VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V - <5.3 ns/V Typical Static Characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0V); Tamb = 25 oC Symbol Parameter Conditions Min Typ. Max Unit VOH HIGH-level output voltage A port; VCCA = 1.2V; IO = -20μA 1.1 V VOL LOW-level output voltage A port; VCCA = 1.2V; IO = 20μA 0.09 V II Input leakage current OE input; V I = 0V or 1.98V; V CCA = 0.72V to 1.98V; V CCB = 0.72V to 7.98V ±1 μA IOZ OFF-state output current A or B port; V O = 0V to V CCO(1); VCCA = 0.72V to 1.98V; V CCB = 0.72V to 1.98V ±1 μA IOFF Power-off leakage current A port; VI or VO = 0V to 1.98V; VCCA = 0V; VCCB = 0V to 1.98V ±1 μA B port; VI or VO = 0V to 1.98V; VCCB = 0V; VCCA = 0V to 1.98V ±1 ICC Supply current VI = 0V or VCCI(2); IO = 0V ICC(A); V CCA = 0.72V; VCCB = 0.72V to 1.98V 0.05 μA ICC(B); V CCA = 0.72V; V CCB = 0.72V to 1.98V 3.3 μA ICC(A)+ ICC(B); V CCA = 0.72V; V CCB = 0.72V to 1.98V 3.5 μA Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those in dicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 5 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 Symbol Parameter Conditions Min Typ. Max Unit CI Input capacitance OE input; V CCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 1.0 pF CI/O Input/Output capacitance A port; VCCA = 0.72V to 1.98V; V CCB = 0.72V to 1.98V 4.0 pF B port; VCCA = 0.72V to 1.98V; V CCB = 0.72V to 1.98V 4.0 pF Note: 1. VCCO is the supply voltage associated with the output. 2. VCCI is the supply voltage associated with the input. VCCA, VCCB = 0.72 V to 1.98 V; GND = 0V; Tamb = -40 C to +125 C; unless otherwise specified Parameter Description Test Conditions -40 °C to +85 °C -40 °C to +125 °C Unit Min. Max. Min. Max. A port or B port VIH HIGH-level input voltage VCCA = 0.72V to 0.9V; VCCB = 0.72V to 0.9V VCCI – 0.2 [1] VCCI -0.2 V VCCA = 0.9V to 1.98V; VCCB = 0.9V to 1.98V VCCI -0.4 VCCI -0.4 V VIL LOW-level input voltage VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 0.3VCCA 0.3VCCA V VOH HIGH-level output voltage IO = -20µA; VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V VCCO - 0.4 [2] VCCO - 0.4 V VOL LOW-level output voltage IO = 20µA; VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 0.3 0.3 V ILI Input leakage current OE input, VCCA = 0.72V to 1.98V, VCCB = 0.72V to 1.98V. ±2 ±5 μA IOZ OFF-state output current VO = 0V or VCCO; VCCA = 0.72V to 1.98V VCCB = 0.72V to 1.98V ±2 ±10 μA IOFF Power Off Leakage current A port; VI or VO = 0V to 1.98V; VCCA = 0V; VCCB = 0V to 1.98V ±2 ±10 μA B port; VI or VO = 0V to 1.98V; VCCB = 0V; VCCA = 0V to 1.98V ±2 ±10 μA ICCA Supply Current VI = 0V or VCCI; IO = 0A; OE = LOW; VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 5 15 μA VI = 0V or VCCI; IO = 0A; OE = HIGH VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 6 20 μA VCCA = 1.98V; VCCB = 0V 3.5 15 μA VCCA = 0V; VCCB = 1.98V -2 -15 μA

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 6 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 Parameter Description Test Conditions -40 °C to +85 °C -40 °C to +125 °C Unit Min. Max. Min. Max. ICCB Supply Current VI = 0V or VCCI; IO = 0A; OE = LOW; VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 8 29 μA VI = 0V or VCCI; IO = 0A; OE = HIGH VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 11 36 μA VCCA = 1.98V; VCCB = 0V -2 -15 μA VCCA = 0V; VCCB = 1.98V 6 - 20 μA ICCA + ICCB Supply Current OE = LOW; VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 16 56 μA Enable VIH HIGH-level input voltage VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 0.65VCCA 0.65VCCA V VIL LOW-level input voltage VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V 0.3VCCA 0.3VCCA V ILI Input leakage current VI = 0V to 1.98V; VCCA = 0.72V to 1.98V; VCCB = 0.72V to 1.98V ±2 ±5 μA Notes: 1. VCCI is the supply voltage associated with the input. 2. VCCO is the supply voltage associated with the output. Dynamic Characteristics VCCA = 0.8V ± 10%; GND = 0V; Tamb = -40℃ to +85℃; unless otherwise specified. (1)(2) tEN Enable time OE to A, B; CL = 15pF 125 150 120 160 ns tDIS Disable time OE to A, No external load [2] 25 25 ns OE to B, No external load [2] 25 25 ns OE to A; CL = 15pF 50 50 ns OE to B; CL = 15pF 50 50 ns tSKO Output Skew time Delta between channel [3] 0 0.2 0.4 0 0.2 0.4 ns tW Pulse Width Data input 37 37 ns fDATA Data rate 0.064 26 0.064 26 Mbps Notes: 1. tpd is the same as tPLH and tPHL; ten is the same as tPZL and tPZH; tdis is the same as tPLZ and tPHZ; tt is the same as tTHL and tTLH. 2. Guaranteed by design. Delay between OE going LOW and when the outputs are actually disabled. 3. Skew between any two outputs of the same package switching in the same direction. One channel is not always faster than the other.

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 7 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 VCCA = 1.2V ± 10%; GND = 0V; Tamb = -40℃ to +85℃; unless otherwise specified. tPD propagation delay A to B, CL = 15pF 4.5 6.1 2.5 3.5 ns B to A, CL = 15pF 3.9 5.3 2.8 3.9 ns tPDC propagation delay A to B, CL = 80pF NA NA NA 4.9 7 ns B to A, CL = 30pF NA NA NA 3.4 5 ns tEN Enable time OE to A, B; CL = 15pF 50 100 50 100 ns tDIS Disable time OE to A, No external load 25 25 ns OE to B, No external load 25 25 ns OE to A; CL = 15pF 50 50 ns OE to B; CL = 15pF 50 50 ns tt transition time A port; CL = 15pF 2.6 3.5 1.5 2.5 ns B port; CL = 15pF 3.6 5.1 1.3 2.2 ns ttC transition time A port; CL = 30pF NA NA NA 2.2 3.6 ns B port; CL = 80pF NA NA NA 4.3 6.3 ns tW Pulse Width Data input 15 13.5 ns fDATA Data rate 0.064 52 0.064 52 Mbps VCCA = 1.8V ± 10%; GND = 0V; Tamb = -40℃ to +85℃; unless otherwise specified. (1)(2) Symbol Parameter Test Conditions VCCB = 1.8V ± 10% Unit Min. Typ. Max. tPD propagation delay A to B, CL = 15pF 2.5 3.4 ns B to A, CL = 15pF 2.3 3 ns tEN Enable time OE to A, B; CL = 15pF 25 50 ns tDIS Disable time OE to A, No external load 25 ns OE to B, No external load 25 ns OE to A; CL = 15pF 50 ns OE to B; CL = 15pF 50 ns tt transition time A port; CL = 15pF 1.2 1.7 ns B port; CL = 15pF 1.7 2.5 ns tSKO Output Skew time Delta between channel [3] 0 0.1 0.2 ns tW Pulse Width Data input 13.5 ns fDATA Data rate 0.064 52 Mbps VCCA = 0.8V ± 10%; GND = 0V; Tamb = -40℃ to +125℃; unless otherwise specified. (1)(2) tPD [1] propagation delay A to B, CL = 15pF 5.6 7.7 3.9 5.3 ns B to A, CL = 15pF 10.6 19.9 9.6 17.2 ns tEN Enable time OE to A, B; CL = 15pF 125 150 120 160 ns tDIS Disable time OE to A, No external load [2] 25 25 ns OE to B, No external load [2] 25 25 ns OE to A; CL = 15pF 50 50 ns

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 8 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 OE to B; CL = 15pF 50 50 ns tt transition time A port; CL = 15pF 8.5 17.5 9 15.4 ns B port; CL = 15pF 4 5.8 1.5 2.1 ns tSKO Output Skew time Delta between channel [3] 0 0.2 0.4 0 0.2 0.4 ns tW Pulse Width Data input 37 37 ns fDATA Data rate 0.064 26 0.064 26 Mbps Notes: 1. tpd is the same as tPLH and tPHL; ten is the same as tPZL and tPZH; tdis is the same as tPLZ and tPHZ; tt is the same as tTHL and tTLH. 2. Guaranteed by design. Delay between OE going LOW and when the outputs are actually disabled. 3. Skew between any two outputs of the same package switching in the same direction. One channel is not always faster than the other. VCCA = 1.2V ± 10%; GND = 0V; Tamb = -40℃ to +125℃; unless otherwise specified. (1)(2) tPD propagation delay A to B, CL = 15pF 4.5 6.2 2.5 3.6 ns B to A, CL = 15pF 3.9 5.4 2.8 4.0 ns tPDC propagation delay A to B, CL = 80pF NA NA NA 4.9 7.4 ns B to A, CL = 30pF NA NA NA 3.4 5.3 ns tEN Enable time OE to A, B; CL = 15pF 50 100 50 100 ns tDIS Disable time OE to A, No external load 25 25 ns OE to B, No external load 25 25 ns OE to A; CL = 15pF 50 - 50 ns OE to B; CL = 15pF 50 - 50 ns tt transition time A port; CL = 15pF 2.6 3.5 1.5 2.6 ns B port; CL = 15pF 3.6 5.1 1.3 2.3 ns ttC transition time A port; CL = 30pF NA NA NA 2.2 3.8 ns B port; CL = 80pF NA NA NA 4.3 6.9 ns tSKO Output Skew time Delta between channel 0 0.1 0.2 0 0.1 0.3 ns tW Pulse Width Data input 15 13.5 ns fDATA Data rate 0.064 52 0.064 52 Mbps VCCA = 1.8V ± 10%; GND = 0V; Tamb = -40℃ to +125℃; unless otherwise specified. (1)(2) Symbol Parameter Test Conditions VCCB = 1.8V ± 10% Unit Min. Typ. Max. tPD propagation delay A to B, CL = 15pF 2.5 3.5 ns B to A, CL = 15pF 2.3 3.1 ns tEN Enable time OE to A, B; CL = 15pF 25 50 ns tDIS Disable time OE to A, No external load 25 ns OE to B, No external load 25 ns OE to A; CL = 15pF 50 ns OE to B; CL = 15pF 50 ns tt transition time A port; CL = 15pF 1.2 1.7 ns B port; CL = 15pF 1.7 2.6 ns tSKO Output Skew time Delta between channel [3] 0 0.1 0.2 ns tW Pulse Width Data input 13.5 ns fDATA Data rate 0.064 52 Mbps

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 9 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 Supply Voltage Input Output VCCO VM VM VX VY Supply Voltage Input Load VEXT VCCA VCCB VI Δt/ΔV CL RL tPLH, tPHL tPZH, tPHZ tPZL, tPLZ(3) 0.72V to 1.98V 0.72V to 1.98V VCCI ≤ 1.0 ns/V 15pF 50kΩ, 1MΩ Open Open 2VCCO 1. VCCI is the supply voltage associated with the input. 2. For measuring data rate, pulse width, propagation delay and output rise and fall measurements, RL = 1 MΩ; for measuring enable and disable times, RL = 50 kΩ. 3. VCCO is the supply voltage associated with the output.

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 10 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 Input Driver Requirements Power-up and Power-down Enable and Disable

Ordering Information

Part Number Package Code Description PI3CLS9606HKEX HK 8-Pin, X1-DFN1410 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. E = Pb-free and Green 5. X suffix = Tape/Reel

PI3CLS9606 www.diodes.com November 2023 Document Number DS44908 Rev 3-2 14 © 2023 Copyright Diodes Incorporated. All Rights Reserved. PI3CLS9606 IMPORTANT NOTICE 1. DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON -INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes’ products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes’ products. Diodes’ products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes’ products for their intended applications, (c) ensuring their applications, which incorporate Diodes’ products, comply the applicable legal and regulatory requirements as well as safety and functional -safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfu nction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their applications. 3. Diodes assumes no liability for any application -related information, support, assistance or feedback that may be provided b y Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and liabilities. 4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent ap plications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes’ website) under this document. 5. Diodes’ products are provided subject to Diodes’ Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/ terms-and- conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. 6. Diodes’ products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sa le is prohibited under any applicable laws and regulations. Should customers or users use Diodes’ products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or penalti es arising in connection therewith or as a result thereof, and (b) indemnify and hol d Diodes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicab le laws and regulations, as well as any unintended or unauthorized application. 7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may c ontain technical inaccuracies, omissions and typographical errors. Diodes does not warra nt that information contained in this document is error -free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes. 8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion her eof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use. 9. This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/ter ms-and-conditions/important- notice The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. All other trademarks are the property of their respective owners. © 2023 Diodes Incorporated. All Rights Reserved. www.diodes.com

Product Information

PI3CLS9606 specifications and overview.

Summary

Dual Bidirectional I3C/I2C-bus Voltage-level Translator Rev 3-2 November 2023

Description

Dual Bidirectional I3C/I2C-bus Voltage-level Translator Rev 3-2 November 2023

Source title PI3CLS9606 Datasheet(PDF) - Diodes Incorporated

Related Parts

More parts from the same family.

Browse manufacturer