DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR-RoHS Your Perfect Inductor Rev .1502 PI13050 TYPE

  • FEATURE 1. Shielded constrution 2. Frequency range up to 5MHz, Low DCR(Ω), Low Buzz Noise
  • Applications 1. Notebook, server application, High current power supplier
  • Shape and Dimension ●Schem atics and Land Patterns(mm) A=12.90m/m Max ; B=14.00m/m Max
  • Specification P/N L (μH) RDC (mΩ) Typical RDC (mΩ)Max Isat (A) Irms (A) PI13050-R10M 0.10±20% 0.53 0.60 118 55 PI13050-R22M 0.22±20% 0.64 0.80 110 51 PI13050-R33M 0.33±20% 0.85 1.10 80 42 PI13050-R47M 0.47±20% 1.10 1.30 65 38 PI13050-R56M 0.56±20% 1.30 1.50 55 36 PI13050-R68M 0.68±20% 1.50 1.70 54 34 PI13050-R82M 0.82±20% 2.00 2.30 53 31 PI13050-1R0M 1.0±20% 2.10 2.50 50 29 PI13050-1R5M 1.5±20% 3.40 4.10 48 23 PI13050-2R2M 2.2±20% 4.60 5.50 32 20 PI13050-3R3M 3.3±20% 7.70 9.20 32 15 PI13050-4R7M 4.7±20% 12.8 15.0 27 12 PI13050-5R6M 5.6±20% 14.0 16.5 22 11.5 PI13050-6R8M 6.8±20% 15.4 18.5 21 11 PI13050-8R2M 8.2±20% 18.9 22.5 18 9.5 PI13050-100M 10±20% 21.4 25.5 16 9.0

FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR-RoHS Your Perfect Inductor Rev.1502 Note1. Measurement frequency of Inductance value : at 100KHz, 0.25V Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. Isat: DC current at which the inductance drops 20%(typ) from its value without current Note4. Irms: Average current for 40℃ temperature rise from 25 ℃ ambient(ty pical) Note5. Inductance tolerance: M: ±20% Note6. Packaging: Taping ; Quantity: 250 Piece/reel

FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR-RoHS Your Perfect Inductor Rev.1502 GENERAL CHARACTERISTICS 1. Operating temperature range: -55 TO + 125 (I ncludes temperature when the coil is heated)℃ 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper pl ate and terminals of coil. Push in two directions of X.Ywithstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100M Ω at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdow n at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: I nductance coefficient (0~2,000)x10-6/ (℃ -25~+80 ).℃ 7. Humidity characteristics(Moisture Resistance): Indu ctance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2 and 1 hour drying under normal condition.℃ 8. Vibration resistance: Inductance deviation within ±5%, af ter vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5 %, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260 , 10 seconds(See attached recommend reflow)℃ 11. Storage environment: Storage condition: Temper ature Range: 10 ~ 35 (Generally: 21 ~ 31 ) , ℃℃ ℃℃ Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range: -35 ~ 85 , Humidity Range: 50% ~ 95% RH℃℃ 12. Use components within 6 months. If 6 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245℃ Peak 230℃ 170±10℃,60-120 S 300 250 200 150 100 T(℃) T(s) 300240180120600 Lead-free the recommended reflow condition