DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor Rev.1701 PI13038Q1 TYPE

  • FEATURE 1. Shielded construction，Frequency range up to 5MHz 2. AEC-Q200 Grade 1 qualified
  • Applications 1. Notebook, server application, High current power supplier
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification P/N L (μH) RDC (mΩ) Typical RDC (mΩ)Max Isat (A) Irms (A) PI13038Q1-R10M 0.10±20% 0.80 0.96 84 43 PI13038Q1-R15M 0.15±20% 1.0 1.2 75 41 PI13038Q1-R22M 0.22±20% 1.1 1.3 65 38.5 PI13038Q1-R33M 0.33±20% 1.3 1.5 62 38.5 PI13038Q1-R47M 0.47±20% 1.6 2.0 55 32 PI13038Q1-R60M 0.60±20% 1.8 2.2 51 29 PI13038Q1-R68M 0.68±20% 2.3 2.5 49 28 PI13038Q1-R82M 0.82±20% 2.6 3.0 44 25 PI13038Q1-1R0M 1.0±20% 3.3 3.5 40 24 PI13038Q1-1R5M 1.5±20% 5.1 5.5 35 19 PI13038Q1-1R8M 1.8±20% 6.0 7.0 30 16.5 PI13038Q1-2R2M 2.2±20% 7.2 8.0 29 16 PI13038Q1-3R3M 3.3±20% 11.0 12.0 27 12 PI13038Q1-4R7M 4.7±20% 14.3 15.0 24 10 PI13038Q1-5R6M 5.6±20% 17.1 18.0 19 9.5 PI13038Q1-6R8M 6.8±20% 19.8 22.0 18 9.0 PI13038Q1-8R2M 8.2±20% 24.8 28.0 16 8.5 PI13038Q1-100M 10±20% 30.4 34.0 14 7.0

FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor Rev.1701 Note1. Measurement frequency of Inductance value : at 100KHz Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. Isat: DC current at which the inductance drops 20%(typ) from its value without current Note4. Irms: Average current for 40℃ temperature rise from 25℃ ambient(typical) Note5. Inductance tolerance: M: ±20% Note6. Packaging: Taping ; Quantity: 500pcs/reel

FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor Rev.1701 GENERAL CHARACTERISTICS 1. Operating temperature range: -55 TO + 125℃(Includes temperature when the coil is heated) 2. High temperature exposure(storage) refer MIL-STD-202 Method 108: 1000 hrs at rated operating after test conclusion. 3. Temperature cycling refer JESD22 Method JA-104: 1000 cycles(-55 TO + 125℃). Measurement at 24±4 hours 4. Biased Humidity refer MIL-STD-202 Method 103: 1000 hours 85℃/85%RH. Unpowered. Measurement at 24±4 hours after test conclusion. 5. Operational Life refer MIL-PRF-27: 1000 hrs. at 125 ℃ tested. Measurement at 24±4 hours after test conclusion. 6. External Visual refer MIL-STD-883 Method 2009: Inspect device construction, marking and workmanship. 7. Physical Dimension refer JESD22 Method JB-100: Verify physical dimensions to the applicable device detail specification. 8. Resistance to Solvents refer MIL-STD-202 Method 215: Add aqueous wash chemical - OKEM clean or equivalent. 9. Mechanical Shock refer MIL-STD-202 Method 213: Figure 1 of Method 213. Condition C. 10. Vibration refer MIL-STD-202 Method 204: 5g;s for 20 minutes, 12 cycles each of 3 orientations. Test from 10-2000 Hz. 11. Resistance to soldering Heat refer MIL-STD-202 Method 210: Condition B No pre-heat of samples. Single wave solder-procedure 2 for SMD and procedure 1 for leaded with solder within 1.5mm of device body. 12. ESD refer AEC-Q200-002 or ISO/DIS 10605: Direct contact discharge 2kV. 13. Solderability refer J-STD-002: For both Leaded & SMD. Magnification 50X. Conditions: Leaded, Method A@235℃,category 3 ; SMD, a)Method B, 4hrs@155℃ dry heat @235℃, b)Method B@215℃ category 3., c)Method D category 3@260℃ 14. Electrical Characterization refer spec: Show Min, Max Mean and Standard deviation at room from Min and Max temperature. 15. Flammability refer UL-94: V-0 or V-1 Acceptable. 16. Board Flex refer AEC-Q200-005: 60 sec minimum holding time. 17. Terminal Strength(SMD) refer AEC-Q200-006 18. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245 ℃ Peak 230 ℃ 170 ± 10℃ ,6 0-120S 300 250 200 150 100 T( ℃ ) T(s) 300240180120600 Lead-free the recom m ended refl ow condi ti on