DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor www.fengjui.com.tw Rev.1601 PI07030Q1 TYPE
- FEATURE 1. Shielded construction，Frequency range up to 5MHz 2. AEC-Q200 Grade 1 qualified
- Applications 1. Notebook, server application, High current power supplier
- Shape and Dimension ●Schematics and Land Patterns(mm) G=8.00m/m ; H=3.45m/m ; I=3.70m/m
- Specification P/N L (μH) RDC (mΩ) Typical RDC (mΩ)Max Isat (A) Irms (A) PI07030Q1-R10M 0.10±20% 1.5 1.7 60 32.5 PI07030Q1-R15M 0.15±20% 1.9 2.5 52 26 PI07030Q1-R20M 0.20±20% 2.4 3.0 41 24 PI07030Q1-R22M 0.22±20% 2.5 2.8 40 23 PI07030Q1-R33M 0.33±20% 3.5 3.9 30 20 PI07030Q1-R47M 0.47±20% 4.0 4.2 26 17.5 PI07030Q1-R68M 0.68±20% 5.0 5.5 25 15.5 PI07030Q1-R82M 0.82±20% 6.7 8.0 24 13 PI07030Q1-1R0M 1.0±20% 9.0 10 22 11 PI07030Q1-1R5M 1.5±20% 14 15 18 9.0 PI07030Q1-2R2M 2.2±20% 18 20 14 8.0 PI07030Q1-3R3M 3.3±20% 28 30 13.5 6.0 PI07030Q1-4R7M 4.7±20% 37 40 10.0 5.5 PI07030Q1-5R6M 5.6±20% 48 54 7.5 5.0 PI07030Q1-6R8M 6.8±20% 54 60 8.0 4.5 PI07030Q1-8R2M 8.2±20% 64 68 7.5 4.0 PI07030Q1-100M 10±20% 102 105 7.0 3.0 PI07030Q1-150M 15±20% 152 175 4.0 2.5
FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor www.fengjui.com.tw Rev.1601 P/N L (μH) RDC (mΩ) Typical RDC (mΩ)Max Isat (A) Irms (A) PI07030Q1-220M 22±20% 210 230 3.0 2.0 PI07030Q1-330M 33±20% 340 380 2.5 1.5 PI07030Q1-470M 47±20% 550 580 2.5 1.25 Note1. Measurement frequency of Inductance value : at 100KHz Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. Isat: DC current at which the inductance drops 20%(typ) from its value without current Note4. Irms: Average current for 40℃ temperature rise from 25℃ ambient(typical) Note5. Inductance tolerance: M: ±20% Note6. Packaging: Taping ; 1000 Piece/reel Taping dimension: A0=7.60mm ; B0=7.60mm ; K0=3.80mm
FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR -RoHS Your Perfect Inductor www.fengjui.com.tw Rev.1601 GENERAL CHARACTERISTICS 1. Operating temperature range: -55 TO + 125℃(Includes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Ywithstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃ degree Celsius), inductance deviation within±5.0%, after 96 hours. 7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2℃and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow) 11. Storage condition: Temperature Range: 0℃ ~ 35℃；-40℃ ~ 105℃ (after PCB)，Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245 ℃ Peak 230 ℃ 170 ± 10℃ ,6 0-120S 300 250 200 150 100 T( ℃ ) T(s) 300240180120600 Lead-free the recom m ended refl ow condi ti on