DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR-RoHS Your Perfect Inductor Rev.1701 PI07024 TYPE

  • FEATURE 1. Shielded constrution 2. Frequency range up to 5MHz, Low DCR(Ω) 3. Low Buzz Noise
  • Applications 1. Notebook, server applicati on, High current power supplier
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification P/N L (μH) RDC (mΩ) Typical RDC (mΩ)Max SRF (MHz) ref. Isat (A) Irms (A) PI07024-R10M 0.10±20% 1.5 1.7 20 50 30 PI07024-R22M 0.22±20% 2.9 3.2 18 34 21 PI07024-R33M 0.33±20% 3.7 4.1 16 22 18 PI07024-R47M 0.47±20% 6.0 6.5 14 21 13.5 PI07024-R68M 0.68±20% 8.7 9.4 12 18 11 PI07024-R82M 0.82±20% 10.6 11.8 10 17 10 PI07024-1R5M 1.5±20% 18.5 21.2 9 15 7.5 PI07024-3R3M 3.3±20% 36.5 51.6 8 13 5.0 PI07024-6R8M 6.8±20% 72.5 95.0 7 9 3.5 PI07024-8R2M 8.2±20% 95.0 120 6 8 3.0 PI07024-100M 10±20% 115.6 129 5.5 7 2.5 PI07024-220M 22±20% 320.0 380 5 3.0 1.5

FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR-RoHS Your Perfect Inductor Rev.1701 Note1. Measurement frequency of Inductance value : at 100KHz Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. Isat: DC current at which the inductance drops 20%(typ) from its value without current Note4. Irms: Average current for 40℃ temperature rise from 25 ℃ ambient(typical) Note5. Inductance tolerance: M: ±20% Note6. Packaging: Taping : 1500 Piece/reel

FENG-JUI TECHNOLOGY CO., LTD HIGH CURRENT INDUCTOR-RoHS Your Perfect Inductor Rev.1701 GENERAL CHARACTERISTICS 1. Operating temperature range: -55 TO + 125 (I ncludes temperature when the coil is heated)℃ 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper plat e and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100M Ω at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdow n at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Indu ctance coefficient (0~2,000)x10-6/℃(-25~+80℃ degree Celsius), inductance deviation within±5.0%, after 96 hours. 7. Humidity characteristics(Moisture Resistance): Indu ctance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2℃and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, af ter vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5 %, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow) 11. Storage condition: Temperature Range: 0 ℃ ~ 35 ℃；-55℃ ~ 125 ℃ (after PCB) ，Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245℃ Peak 230℃ 170±10℃,60-120 S 300 250 200 150 100 T(℃) T(s) 300240180120600 Lead-free the recommended reflow condition