PHU9 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

www.sensata.com Copyright © 2021 Sensata Technologies, Inc. Features:

  • Profibus encoder - Ø30mm through shaft version
  • PEEK or aluminum reduction hubs available : 10 to 28mm
  • Robustness and excellent resistance to shocks / vibrations
  • Double or triple mounting possibility (incremental – tacho or absolute interfaces)
  • High protection level IP65
  • High performances in temperature –20°C to +80°C
  • 5 to 30 Vdc power supply
  • High resolution available: 8 192 points par revolution (13 bits resolution)
  • Turns numerisation up to 65 536 (16 bits)
  • DPV0, Class 2, encoder profile 3.062
  • PHU9 also available with SSI, programmable SSI, RS232 & CANopen interface | PHU9 ABSOLUTE MULTI-TURN ENCODER, PROFIBUS INTERFACE, PHU9 SERIE Material Cover : steel Body : aluminum Shaft : stainless steel Bearings 6 807 serie Maximum load Axial : 50 N Radial : 80 N Shaft inertia ≤ 55.10-6 kg.m2 Torque ≤ 25.10-3 N.m Permissible max. speed 6 000 min-1 Continuous max. speed 3 600 min-1 Shaft Seal Viton Shock (EN60068-2-27) ≤ 500 m.s-2 (during 6 ms) Vibration (EN60068-2-6) ≤ 100 m.s-2 (10 … 2 000 Hz) EMC EN 61000-6-4, EN 61000-6-2 Isolation 500V (1 min.) Weight (approx.) 1,200 kg Operating temperature - 20 ... + 80 °C (encoder T°) Storage temperature - 20 ... + 80 °C Protection(EN 60529) IP 65 Torque (ring pressure screw) nominal: 3N.m, break: 4N.m Theoretical mechanical lifetime 10 9 turns (F axial / F radial)

25 N / 40 N : 140 50 N / 80 N : 17

www.sensata.com Page 2 Copyright © 2021 Sensata Technologies, Inc. Switch - on “ON” 1 2 3 4 5 6 7 1 2 4 8 16 32 64 PARAMETERS PROGRAMMABLES CONNECTION GENERALITY Power supply : 5-30V Consumption <200 mA (160mA typ) Transmission frequency : From 9.6Kbaud to 12Mbaud Electronic interface : Opto-isolated RS 485 Address : Permits the addressing of each encoder in an installation (32 master stations or slaves stations per segment without repetition, 127 maximum with repetition) Direction : Permits the definition of the counting direction of the encoder (CW or CCW) following its mechanical position Resolution : The number or points per turn can be between 0 and 8192 Global resolution (MAX RANGE) : Total number of codes of the encoder (2 to 536 870 912) Reset : Defines the value of its actual position Time base : Defines the base time for the speed calculation (10 ms , 100 ms, 1 s, speed in rpm) Integrated terminal box on encoder – ‘’push-in’’ connection – max 1,5mm². ON ON Adress: 0 to 126 (Binary code) End line resistance termination: 1, 2 ‘’ON’’ (Beginning or end line) Switch 8 on “OFF”. Example: Address 5: Switch 1 & 3 on “ON”, others on “OFF”.

www.sensata.com Page 3 Copyright © 2021 Sensata Technologies, Inc. DIMENSIONS PHU9 Profibus connection BTR (Terminal box) - with DACs 9445/009* mounted on bearings housing * : accessory to be ordered separately.

www.sensata.com CONTACT US Americas +1 (800) 350 2727 sales.beisensors@sensata.com Europe, Middle East & Africa +33 (3) 88 20 8080 position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Copyright © 2021 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements, and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-ELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA Revised 07/27/2021 Made In France ORDERING OPTIONS Example : PHU9 _30 //PBGB//13B16//BTR Model PHU9 Codeur embase alu PBU9 Codeur embase inox Shaft Ø 30 : 30mm 10 to 28mm reduction hub available Supply P : 5 to 30Vdc Interface BG : Profibus Code B: Binary Resolution 13 : 8192 points per turn (213) Turns Nb B16 : 65 536 turns (216) Connection BT Terminal Box Connection Orientation R : Radial PHU9 _ 30 // P BG B // 13 B16 // BT R AGENCY APPROVALS & CERTIFICATES