PHR-12100 POWER-SONIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

TERMINALS: (mm) DIMENSIONS: inch (mm) PERFORMANCE SPECIFICATIONS Nominal Voltage 12 volts (6 cells) Nominal Power (15 min.) 93 W/Cell Rated Capacity 20-hr. (1.35A to 10.80 volts) 10-hr. (2.66A to 10.50 volts) 8-hr. (3.22A to 10.50 volts) 27.0 AH 26.6 AH 25.8 AH Approximate Weight 20.9 lbs. (9.48 kg) Internal Resistance (approx.) 10.0 milliohms Max Discharge Current (5 Sec.) 540 amperes Shelf Life (% of nominal capacity at 68°F (20°C)

1 Month

3 Month

6 Month

97% 91% 83% Operating Temperature Range Charge Discharge Case and Cover Flame Retardant ABS Plastic UL94:V-0 Power Sonic Chargers PSC-124000-PC PSC-243500-PC www.power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E CORPORATE HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation

7550 Panasonic Way, San Diego,

T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: customer-service@power-sonic.com POWER-SONIC EUROPE LIMITED (EMEA – EUROPE, MIDDLE EAST AND AFRICA)

3 Buckingham Square,

Hurricane Way, Wickford, Essex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: salesEMEA@power-sonic.com HT H W L

FEATURES

  • Superb high-rate discharge characteristics that ensure reliable performance in UPS applications for up to 10 years
  • Specifically designed for UPS and critical power backup applications
  • Valve regulated, maintenance free spill proof construction
  • Precision plate pasting for higher consistency with 100% load testing to ensure uniform capacity
  • Patented dual-paste process for enhanced active material bonding and computer guided volumetric electrolyte control for precision filling
  • Rugged vibration and impact resistant ABS case and cover flame retardant to UL94-V0 APPROVALS and C.A.B. certified
  • U.L recognized
  • ISO9001:2015 – Quality management systemsL: 6.46 (164) W: 4.92 (125) H: 6.89 (175) HT: 6.50 (165) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. Rev1: 11/18 UPS Data Center PHR-12100 12V 27.0 AH @ 20-hr. 93 W/Cell @ 15-min. Rechargeable Sealed Lead Acid Battery PHR – High-Rate Series T12: Threaded insert with 5mm stud fastener Torque: 2.0~3.0 Nxm 12mm 3mm

www.power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E CORPORATE HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: customer-service@power-sonic.com POWER-SONIC EUROPE LIMITED (EMEA – EUROPE, MIDDLE EAST AND AFRICA) Hurricane Way, Wickford, Essex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: salesEMEA@power-sonic.com PHR-12100 12V 27.0 AH @ 20-hr. 93 W/Cell @ 15-min. Rechargeable Sealed Lead Acid Battery PHR – High-Rate Series CHARGING Cycle Applications: Apply constant voltage charge at Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Temperature Compensation: Charging Voltage for both Cyclic and Standby applications should be regulated in relation to ambient temperature. As temperature rises charging voltage should be reduced to prevent overcharge and increased as temperature falls to avoid undercharge. For further charging information including temperature compensation factors, see Power Sonic Technical Manual/ Power Sonic Charger specifications. CHARGERS Power Sonic offers a wide range of chargers suitable for batteries with a variety of capacities. Please refer to our website for more information on our switch mode and transformer type chargers. Please contact our technical department for advice if you have difficulty in locating a suitable charger. FURTHER INFORMATION Please refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc.

APPLICATIONS

  • High Rate UPS • Data Centers CONSTANT CURRENT DISCHARGE (AMPERES) AT 25°C (77°F) F.V/Time 5min 10min 15min 20min 30min 45min 1h 2h 3h 4h 5h 6h 8h 10h 20h CONSTANT POWER DISCHARGE (WATTS/CELL) AT 25°C (77°F) F.V/Time 5min 10min 15min 20min 30min 45min 1h 2h 3h 4h 5h 6h 8h 10h 20h Rev1: 11/18