MHPM6B15E60D3 MOTOROLA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
1Motorola IGBT Device Data /C0080/C0114/C0111/C0100/C0117/C0099/C0116 /C0080/C0114/C0101/C0118/C0105/C0101/C0119 /C0072/C0121/C0098/C0114/C0105/C0100 /C0080/C0111/C0119/C0101/C0114 /C0077/C0111/C0100/C0117/C0108/C0101 Integrated Power Stage for 230 VAC Motor Drives These modules integrate a 3–phase inverter and 3–phase rectifier in a single convenient package. They are designed for 0.5, 1.0, and 1.5 hp motor drive applications at frequencies up to 15 kHz. The inverter incorporates advanced E–Series insulated gate bipolar transistors (IGBT) matched with ultrafast soft (UFS) free–wheeling diodes to give optimum performance. The input bridge uses rugged, efficient diodes with high surge capability. The top connector pins are designed for easy interfacing to the user’s control board.
- Short Circuit Rated 10 µs @ 125°C, 400 V
- Pin-to-Baseplate Isolation Exceeds 2500 Vac (rms)
- Compact Package Outline
- Access to Positive and Negative DC Bus
- Gate–Emitter Clamp Diodes for ESD Protection
- UL Recognition Pending
ORDERING INFORMATION
PHPM6B7E60D3 600 7.0 0.5 PHPM6B10E60D3 600 10 1.0 PHPM6B15E60D3 600 15 1.5 MAXIMUM DEVICE RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Repetitive Peak Input Rectifier Reverse Voltage (TJ = 25°C to 150°C) VRRM 900 V IGBT Reverse Voltage VCES 600 V Gate-Emitter Voltage VGES ± 20 V Continuous IGBT Collector Current (TC = 25°C) 7E60 10E60 15E60 ICmax 7.0 A Continuous IGBT Collector Current (TC = 80°C) 7E60 10E60 15E60 IC80 7.0 9.9 A Repetitive Peak IGBT Collector Current (1) 7E60 10E60 15E60 IC(pk) 14 A Continuous Free–Wheeling Diode Current (TC = 25°C) 7E60 10E60 15E60 IFmax 7.0 A Continuous Free–Wheeling Diode Current (TC = 80°C) 7E60 10E60 15E60 IF80 5.2 6.8 A Repetitive Peak Free–Wheeling Diode Current (1) 7E60 10E60 15E60 IF(pk) 14 A (1) 1.0 ms = 1.0% duty cycle This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice. Preferred devices are Motorola recommended choices for future use and best overall value. Order this document by MHPM6B15E60D3/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA 7.0, 10, 15 AMP, 600 VOLT HYBRID POWER MODULES /C0077/C0072/C0080/C0077/C0054/C0066/C0049/C0053/C0069/C0054/C0048/C0068/C0051 /C0077/C0072/C0080/C0077/C0054/C0066/C0049/C0048/C0069/C0054/C0048/C0068/C0051 /C0077/C0072/C0080/C0077/C0054/C0066/C0055/C0069/C0054/C0048/C0068/C0051 Motorola Preferred Devices CASE 464–03 ISSUE B Motorola, Inc. 1998
/C0077/C0072/C0080/C0077/C0054/C0066/C0049/C0053/C0069/C0054/C0048/C0068/C0051 /C0077/C0072/C0080/C0077/C0054/C0066/C0049/C0048/C0069/C0054/C0048/C0068/C0051 /C0077/C0072/C0080/C0077/C0054/C0066/C0055/C0069/C0054/C0048/C0068/C0051
2 Motorola IGBT Device Data
MAXIMUM DEVICE RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Average Converter Output Current (Peak–to–Average ratio of 10, TC = 95°C) IOmax 20 A Continuous Input Rectifier Current (TC = 25°C) IDC 20 A Non–Repetitive Peak Input Rectifier Forward Surge Current (2) (TJ = 95°C prior to start of surge) IFSM 475 A IGBT Power Dissipation per die (TC = 95°C) 7E60 10E60 15E60 PD 14 W Free–Wheeling Diode Power Dissipation per die (TC = 95°C) 7E60 10E60 15E60 PD 7.4 9.0 W Input Rectifier Power Dissipation per die (TC = 95°C) PD 13 W Junction Temperature Range TJ –40 to +150 °C Short Circuit Duration (VCE = 400 V, TJ = 125°C) tsc 10 /C0109s Isolation Voltage, pin to baseplate VISO 2500 Vac Operating Case Temperature Range TC –40 to +95 °C Storage Temperature Range Tstg –40 to +150 °C Mounting Torque — Heat Sink Mounting Holes — 12 lb–in ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit DC AND SMALL SIGNAL CHARACTERISTICS Input Rectifier Forward Voltage (I = 15 A) TJ = 125°C VF — 0.97 0.88 1.2 V Maximum Instantaneous Reverse Current (V = 900 V) TJ = 150°C IR — 3000 /C0109A Gate–Emitter Leakage Current (VCE = 0 V, VGE = ± 20 V) IGES — — ±50 /C0109A Collector–Emitter Leakage Current (VCE = 600 V, VGE = 0 V) ICES — 5.0 100 /C0109A Gate–Emitter Threshold Voltage (VCE = VGE , IC = 1.0 mA) VGE(th) 4.0 6.0 8.0 V Collector–Emitter Breakdown Voltage (IC = 10 mA, VGE = 0 V) V(BR)CES 600 — — V Collector–Emitter Saturation Voltage (IC = ICmax , VGE = 15 V) TJ = 125°C VCE(SAT) — 2.0 1.8 2.4 V Free–Wheeling Diode Forward Voltage (IF = IFmax , VGE = 0 V) TJ = 125°C VF — 2.0 1.8 2.3 V Input Capacitance (VGE = 0 V, VCE = 10 V, f = 1.0 MHz) 7E60 10E60 15E60 C ies — 780 1020 1605 pF THERMAL CHARACTERISTICS (EACH DIE) Thermal Resistance — IGBT 7E60 10E60 15E60 R /C0113JC — 3.1 2.6 1.9 3.8 3.2 2.4 °C/W Thermal Resistance — Free–Wheeling Diode 7E60 10E60 15E60 R /C0113JC — 6.0 4.8 3.4 7.5 6.1 4.2 °C/W Thermal Resistance — Input Rectifier R /C0113JC — 3.4 4.2 °C/W (2) 1.0 ms = 10% pulse width (tw 10%)
Figure 1. Schematic of Module, Showing Pin–Out
4 Motorola IGBT Device Data
Figure 2. Package Footprint
- Package is symmetrical, except for a polarizing plastic post near pin 1, indicated by a non–plated thru–hole in the footprint.
- Dimension of plated thru–holes indicates net size after plating.
- Access holes for mounting screws may or may not be necessary depending on assembly plan for finished product.
/C0077/C0072/C0080/C0077/C0054/C0066/C0049/C0053/C0069/C0054/C0048/C0068/C0051 /C0077/C0072/C0080/C0077/C0054/C0066/C0049/C0048/C0069/C0054/C0048/C0068/C0051 /C0077/C0072/C0080/C0077/C0054/C0066/C0055/C0069/C0054/C0048/C0068/C0051 5Motorola IGBT Device Data PACKAGE DIMENSIONS CASE 464–03 ISSUE B 16 15 U A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. LEAD LOCATION DIMENSIONS (ie: G, S, R, H ...) ARE TO THE CENTER OF THE LEAD.DIM MIN MAX MIN MAX INCHESMILLIMETERS A 88.39 89.41 3.480 3.520 B 38.35 39.37 1.510 1.550 C 12.32 13.59 0.485 0.535 D 0.89 1.65 0.035 0.065 E 8.64 9.65 0.340 0.380 F 0.13 0.64 0.005 0.025 G 5.97 6.73 0.235 0.265 H 33.91 34.67 1.335 1.365 J 0.41 1.22 0.016 0.048 K 16.26 17.27 0.640 0.680 L 3.71 4.72 0.146 0.186 M 5.46 6.48 0.215 0.255 N 10.92 11.94 0.430 0.470 P 24.89 25.91 0.980 1.020 Q 2.01 2.62 0.079 0.103 R 16.76 17.53 0.660 0.690 S 15.49 16.26 0.610 0.640 U 75.69 76.71 2.980 3.020 V 55.88 57.15 2.200 2.250 W 29.97 30.99 1.180 1.220 Y 5.26 5.77 0.207 0.227 R H SG 14 PL Y 2 PL Q 3 PL M 4 PL NPB D 16 PL V X K E L W F J DETAIL Z 16 PL DETAIL Z C X 11.30 12.07 0.445 0.475 AA AA 2.29 2.79 0.090 0.110 AB 16.26 17.27 0.640 0.680 AB Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 4–32–1 Nishi–Gotanda, Shagawa–ku, Tokyo, Japan. 03–5487–8488 Customer Focus Center: 1–800–521–6274 Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE : http://motorola.com/sps/ MHPM6B15E60D3/D◊