PHPA VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

www.vishay.com Vishay Dale Thin Film Revision: 27-May-2021 1 Document Number: 60160 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 High Power Thin Film Wraparound Chip Resistor AEC-Q200 Qualified LINKS TO ADDITIONAL RESOURCES PHPA series chip resistors in corporate the self passivated enhanced tantalum nitride film to give superior moisture resistance, ESD, voltage coefficient, and resistance stability performance. They are design ed with enlarged backside terminations to reduce the th ermal resistance between the topside resistor layer and the solder joint on the end user’s circuit board. Actual power handling capabilit y is limited by the end user mounting process. As with any high power chip resistor the ability to remove the generated heat is critical to the overall performance of the device. CONSTRUCTION

FEATURES

  • AEC-Q200 qualified
  • ESD rating 5A (HBM)
  • Moisture resistant
  • High purity ceramic substrate
  • Power rating to 2.5 W
  • Resistance range 10 Ω to 30.1 kΩ
  • Resistor tolerance to ± 0.1 %
  • TCR to ± 25 ppm/°C
  • Flame resistant UL 94 V-0
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

  • Power supplies
  • Power switching
  • Braking system
  • Test and measurement equipment
  • Motor deflection circuits TYPICAL PERFORMANCE Note (1) Dependent on component mounting by user 333DDD3 D 3D Models Solder coating Barrier layer Tantalum nitride film Passivation Overcoat High purity alumina substrate Adhesion layer ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 10 Ω to 30.1 kΩ - TCR: Absolute 25 ppm/°C, 50 ppm/°C, and 100 ppm/°C -55 °C to +155 °C Tolerance: Absolute ± 0.1 % to ± 5 % +25 °C Power Rating: Resistor 1 W to 2.5 W (1) Maximum at +70 °C Stability: Absolute ΔR 0.50 % 4000 h at +70 °C Stability: Ratio Not applicable - Voltage Coefficient < 0.1 ppm/V - Working Voltage 200 V - Operating Temperature Range -55 °C to +155 °C - Storage Temperature Range -55 °C to +155 °C - Noise < -30 dB - Shelf Life Stability: Absolute ± 0.01 % 1 year at +25 °C

www.vishay.com Vishay Dale Thin Film Revision: 27-May-2021 2 Document Number: 60160 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Dependent on component mounting by user Note

  • Typical Vishay performanc e based on the data median COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKIN G VOLTAGE (V) RESISTANCE RANGE ( Ω) 1206 1000 (1) 200 12 to 30.1K 2512 2500 (1) 200 10 to 30.1K ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) ENVIRONMENTAL TEST CONDITIONS TEST LIMITS TYPICAL VISHAY PERFORMANCE Resistance Temperature Characteristic -55 °C to +155 °C ± 25 ppm/°C +11.5 ppm/°C Maximum Ambient Temperature at Rated Wattage See Derating CurveMaximum Ambient Temperature at Power Derating High Temperature Exposure ΔR MIL-STD-202, method 108, 1000 h at 155 °C ± 0.2 % +0.013 % Temperature Cycling ΔR JESD22, JA-104, 1000 cycles, -55 °C to 155 °C ± 0.25 % +0.006 % Biased Humidity ΔR MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, Life ΔR MIL-STD-202, 108, 2000 h at 70 °C, 100 % power ± 0.5 % +0.060 % Mechanical Shock ΔR MIL-STD-202, 213, condition C ± 0.25 % 0.000 % Vibration ΔR MIL-STD-202, 204, 10 Hz to 2 kHz ± 0.25 % 0.000 % Resistance to Soldering Heat ΔR MIL-STD-202, 210, condition D ± 0.25 % +0.006 % Electrostatic Discharge ΔR AEC-Q200-002 > 8 kV ± 1.0 % -0.098 % Solderability Visual J-STD-002, method B and B1 95 % Acceptable Terminal Strength ΔR AEC-Q200-006 at 1 kg for 60 s ± 1.0 % 0.000 Flame Retardance Visual AEC-Q200-001, para 4.0 Acceptable DIMENSIONS in inches CASE SIZE LENGTH WIDTH W (± 0.005) THICKNESS MIN. / MAX. TOP PAD D (± 0.005) BOTTOM PAD E (± 0.005) LAND PATTERN DIMENSIONS in inches D WT L E 0.1730 0.0710 0.0755 0.0220 0.2910 0.1260 0.0910 0.1090

1206 Land Pattern 2512 Lan d Pattern

www.vishay.com Vishay Dale Thin Film Revision: 27-May-2021 3 Document Number: 60160 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes

  • Chip surface temperature measured using FLIR A40 thermal imaging system with an approximate test card surface temperature of 25 °C
  • T h e r m a l i m a g i n g w as conducted under ambient conditions resulting in a steady state test card surface temperature of 85 °C over the full range of power levels
  • Thermal imaging and load life testing was conducted mounting one device to 2" x 3" test ca rds with 2.5 mil copper plating on both surfaces. Thermal vias on 120 mil centers were utilized for heat transfer between surfaces of the test card Notes
  • Chip surface temperature measured using FLIR A40 thermal imaging system with an approximate test card surface temperature of 25 °C STANDARD MATERIAL SPECIFICATIONS Resistive Element Tantalum nitride Substrate Material Alumina (Al2O3) Terminations (Lead (Pb)-Free) Tin solder plate over nickel barrier PHPA1206 SINGLE PULSE CURVE PHPA1206 CHIP TEMP. VS. APPLIED POWER 100 1000 10000 0.1 100 1000 0.0001 0.001 0.01 0.1 1 10 Axis Title 1st line 2nd line 2nd line Pulse Power (W) Pulse Duration (s) 1 kΩ 49.9 Ω 100 Ω 100 1000 10000 60 80 100 120 140 160 180 200 220 Axis Title 1st line 2nd line 2nd line Applied Power (W) Chip Surface Temperature (°C) 10 Ω 100 Ω 1 kΩ 10 kΩ PHPA2512 SINGLE PULSE CURVE PHPA2512 CHIP TEMP. VS. APPLIED POWER Case Size 2512 2512 2512 Resistance Value Up to 10 Ω Up to 100 Ω Up to 1 kΩ Temperature Power (W) 70 2.67 2.02 1.89 150 7.17 5.34 4.94 200 9.94 7.15 6.48 100 1000 10000 0.1 100 1000 0.0001 0.001 0.01 0.1 1 10 Axis Title 1st line 2nd line 2nd line Pulse Power (W) Pulse Duration (s) 1 kΩ 10 Ω 100 Ω 100 1000 10000 60 80 100 120 140 160 180 200 220 Axis Title 1st line 2nd line 2nd line Applied Power (W) Chip Surface Temperature (°C) 10 Ω 100 Ω 1 kΩ 10 kΩ

www.vishay.com Vishay Dale Thin Film Revision: 27-May-2021 4 Document Number: 60160 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) < 50 Ω “E” TCR characteristic is not available (2) Item single lot date code (3) Package unit single lot date code (4) Preferred packaging code DERATING CURVE GLOBAL PART NUMBER INFORMATION GLOBAL MODEL CASE SIZE TCR (1) RESISTANCE TOLERANCE TERMINATION PACKAGING PHPA 1206 2512 E = ± 25 ppm/°C H = ± 50 ppm/°C K = ± 100 ppm/°C The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. Example: 10R0 = 10 Ω 1000 = 100 Ω 1001 = 1 kΩ B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % J = ± 5.0 % S = wraparound 100 % electroplated pure matte tin RoHS-compliant - e3 BULK BS = 100 min., 1 mult. WAFFLE WS = 100 min., 1 mult. W0 = 100 min.,100 mult. WI = 100 min., 1 mult. (2) WP = 100 min.,1 mult. (3) TAPE AND REEL T0 = 100 min., 100 mult. T1 = 1000 min., 1000 mult. (4) T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = full reel TS = 100 min., 1 mult. TI = 100 min., 1 mult. (2) TP = 100 min., 1 mult. (3) 100 1000 10000 100 Axis Title 1st line 2nd line 2nd line Percent of Rated Power Ambient Temperature (°C) 70 155 125 06E1 02B 01 ST 1APP 2H

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED