PHG

FGG.1T.306.CLAC40Z_V01 LEMO | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 28

Technical content

IP 68 PUSH-PULL CONNECTORS

www.lemo.com ® ® 13 724 6 2 5 4 1 6 956 3 7 8 10 Fixed socket outer shell earthing crown hexagonal nut insulator female contact o-ring locking washer Straight plug outer shell latch sleeve inner shell insulator male contact split insert carrier earthing cone gasket collet collet nut Part Section Showing Internal Components Shielding efficiency > 75 dB at 10 MHz / > 40 dB at 1 GHz IEC 60169-1-3 Outershell and collet nut Latch sleeve/earthing crown Other metallic components Material Surface treatment Material Surface treatment Material Surface treatment Brass Chrome Br ass/Bronze Nickel Br ass Nickel Brass Black chrome Br ass/Bronze Nickel Br ass Nickel POM – Br ass/Bronze Nickel Br ass Nickel Material and Treatments Insulators Material Contact type Brass (UNS C 34500) M ale contact Bronze (UNS C 54400) Fem ale contact Material Contact type PEEK Crimp, solder or print Contacts T series connectors have been specifically designed for outdoor applications. They include an inner sleeve and seals to pre- vent penetration of solids or liquids.This series is watertight when mated to give a protection index of IP68 as per IEC 60529 standard and have the following main features: - IP68 mated - Compatible with existing B sockets - Push-Pull self-latching system - Same mounting hole as B sockets - Mechanical key (FGG) with multiple keys - Black-chrome plated brass and plastic outershell available to avoid cross-mating - Multipole types 2 to 32 contacts - High packing density for space savings - For cables 1.0 up to 10.5 mm - 360° shielding for full EMC shielding - Solder, crimp or print contacts T series Electrical Value Standard Technical Characteristics Mechanical and Climatical Value Standard Endurance > 1000 cycle s 1) IEC 60512-5 test 9a Humidity up to 95% at 60°C – Temperature range -55°C, +200°C / (-20°C, +80°C) 2) – Resistance to vibration 10-2000 Hz, 15 g IEC 60512-4 te st 6d Shock resistance 100 g, 6 m s IEC 60512-4 test 6c Salt spray corrosion test > 1000 h IEC 60512-6 te st 11f Protection index (mated) 3) IP68/IP66 IEC 60529 Latching retention force (average value) From 85 N up to 300 N (depending of the size) – Climatical category 50/175/21 IEC 60068-1 Note: 1) Up to 5000 cycles for size 3T. 2) operating temperature is -20°C, +80°C for watertight or vacuumtight models fitted with an FPM (Viton®) o-ring and Epoxy. 3) IP68 achieved providing that the cable is perfectly circular and that assembly process ensures a high integrity seal.

1www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. FGG FGG PHG PHG EGG EEG HGG HEG FFG FGG EGG HMG Straight plugs Fixed sockets Free sockets Chrome-plated housing models (page 2) Straight plug Fixed socket Plastic housing models (page 5) Insert configuration (page 6) Series Model (page 3) Alignment key (page 5) Fixed socket Insulator: PEEK L = for solder or print contact Y = for crimp contact Insulator: PEEK L = for solder contact Y = for crimp contact E G G 1T 3 0 6 C L L.. . EGG.1T.306.CLL = fixed socket, nut fixing, with key (G), 1T series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, female solder contacts. Z F G G 1T Insert configuration (page 6) Cable ø (page 9) Collet type (page 9) Housing: C = Chrome plated brass K = Black Chrome plated brass B = POM (black) Variant 3 0 6 Series Model (page 2) Alignment key (page 5) C L A C 4 0 Contact: A = male solder L = female solder C = male crimp M = female crimp Plug and free socket Variant .. . FGG.1T.306.CLAC40Z = Straight plug with key (G) and cable collet for bend relief, 1T series, multipole type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 4.0 mm diameter cable and nut for fitting a bend relief. Interconnections Part Numbering System Contact: L = female solder A = male solder M = female crimp C = male crimp N = female print D = male print V = female elbow print Housing: C = Chrome plated brass K = Black Chrome plated brass B = POM Fixed sockets Watertight or vacuumtight models (page 4)

2 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Chrome-plated housing models 7.0 33.2 25.2 5.5 5 9.5 39.0 29.0 7.5 7 12.0 46.0 35.0 11.0 9 15.0 55.0 43.0 14.0 12 18.8 64.0 49.0 16.0 14 Dimensions (mm) A L M S1 S2 Reference Model Series 2.4 3.0 1.0 5.0 1.3 6.5 1.3 8.5 2.6 10.5 Cable ø min. max. ø A S 1S 2 ø A S 1S 2 ø A S 1S 2 FGG Straight plug, cable collet 7.0 32.7 24.7 5.5 6 9.5 38.0 28.0 7.5 7 12.0 45.0 34.0 11.0 9 15.0 54.0 42.0 14.0 12 18.8 62.0 47.0 16.0 15 Dimensions (mm) A L M S1 S2 FGG TT FGG 0T FGG 1T FGG 2T FGG 3T Reference Model Series 2.4 3.0 1.0 5.0 1.3 6.5 1.3 8.5 2.6 10.5 Cable ø min. max. FGG Straight plug, cable collet and nut for fitting a bend relief FFG Straight plug, non latching, cable collet FGG TT FGG 0T FGG 1T FGG 2T FGG 3T ø A S 1S 2 7.0 32.0 5.5 5 9.5 38.0 7.5 7 12.0 43.5 11.0 9 15.0 52.0 14.0 12 18.8 61.5 16.0 14 Dimensions (mm) A L S1 S2 PHG TT PHG 0T PHG 1T PHG 2T PHG 3T Reference Model Series 2.4 3.0 1.0 5.0 1.3 6.5 1.3 8.5 2.6 10.5 Cable ø min. max. PHG Free socket, cable collet 7.0 33.2 25.2 5.5 5 9.5 39.0 29.0 7.5 7 12.0 46.0 35.0 11.0 9 15.0 55.0 43.0 14.0 12 18.8 64.0 49.0 16.0 14 Dimensions (mm) A L M S1 S2 Reference Model Series 2.4 3.0 1.0 5.0 1.3 6.5 1.3 8.5 2.6 10.5 Cable ø min. max. FFG TT FFG 0T FFG 1T FFG 2T FFG 3T

® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. E maxi N L maxi Mø A e ø B S 1 S 2 EGG Fixed socket, nut fixing EGG TT EGG 0T EGG 1T EGG 2T EGG 3T Reference Model Series Dimensions (mm) A B e E L M N1) S1 S2 ø A L maxi E maxi N P e ø B S 1 EEG Fixed socket, nut fixing, back panel mounting ø A S 1S 2 PHG Free socket, cable collet and nut for fitting a bend relief EEG TT EEG 0T EEG 1T EEG 2T EEG 3T Reference Model Series E●● TT E●● 0T E●● 1T E●● 2T E●● 3T Reference Model Series 6.4 7.1 12.5 8.3 9.1 14.5 10.6 12.1 18.5 13.6 15.1 22.5 16.6 18.1 27.0 Panel cut-out B C L 1.0 0.4 2.5 0.4 4.5 0.7 6.0 0.8 9.0 1.0 Mounting nut torque Metal shell Plastic shell Note: 1) maximum length with crimp contacts. Note: 1) maximum length with crimp contacts. ø C + 0.1 B + 0.1 L mini Panel cut-out 7.0 31.5 5.5 6 9.5 37.0 7.5 7 12.0 42.5 11.0 9 15.0 51.0 14.0 12 18.8 60.0 16.0 15 Dimensions (mm) A L S1 S2 PHG TT PHG 0T PHG 1T PHG 2T PHG 3T Reference Model Series 2.4 3.0 1.0 5.0 1.3 6.5 1.3 8.5 2.6 10.5 Cable ø min. max. Dimensions (mm) A B e E L N1) P S1

4 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Watertight or vacuumtight models ø A L maxi N E maxi P e ø B S 1 ø A L maxi N E maxi P e ø B S 1 L maxi N ø A E maxi e M ø B S 1 S 2 HGG Fixed socket, nut fixing, watertight or vacuumtight HEG Fixed socket, nut fixing, watertight or vacuumtight, back panel mounting HMG Fixed socket with earthing tag, nut fixing, watertight or vacuumtight, back panel mounting HMG TT HMG 0T HMG 1T HMG 2T Reference Model Series HEG TT HEG 0T HEG 1T HEG 2T Reference Model Series Reference Model Series HGG.0T.305.CLLP (5 contacts, resin potted) HGG.0T.305.CLLPV (5 contacts, resin potted and vacuumtight tested) These models are identified by a letter «P» at the end of the reference. Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end of the part number (certificate on request). Epoxy resin is used to seal these models. The temperature range is -20°C / +80°C. Part Number Example ø C + 0.1 B + 0.1 L mini Panel cut-out Dimensions (mm) A B e E L M N1) S1 S2 Dimensions (mm) A B e E L N P S1 Dimensions (mm) A B e E L N P S1 H●● TT H●● 0T H●● 1T H●● 2T Reference Model Series 6.4 7.1 12.5 8.3 9.1 14.5 10.6 12.1 18.5 13.6 15.1 22.5 Panel cut-out B C L 1.0 0.4 2.5 0.4 4.5 0.7 6.0 0.8 Mounting nut torque Metal shell Plastic shell HGG TT HGG 0T HGG 1T HGG 2T

5www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Plastic housing models ø A S 2 FGG 0T FGG 1T Reference Model Series 1.0 5.0 1.3 6.5 Cable ø min. max. FGG Straight plug, cable collet and nut for fitting a bend relief, POM outer shell EGG Fixed socket, nut fixing, POM outer shell E maxi N L maxi Mø A e ø B S 1 S 2 Alignment Key Key G A L D Contact type Plug Socket male female male female male female female male G A D L EGG 0T EGG 1T Reference Model Series Note: 1) maximum length with crimp contacts. E●● 0T E●● 1T Reference Model Series 8.3 9.1 14.5 10.6 12.1 18.5 Panel cut-out B C L ø C + 0.1 B + 0.1 L mini Panel cut-out Dimensions (mm) A B e E L M N1) S1 S2 9.7 38.5 28.5 8 13.0 45.0 34.0 10 Dimensions (mm) A L M S2

6 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. TT 0.5 ● ● ● 30 32 28 0T 0.9 ● ● ● ● 22 32 20 1T 1.3 ● ● ● ● 20 26 18 2T 2.0 ● ● ● ● 16 18 12 3T 3.0 ● ● 12 14 10 Insert configurations 302 303 304 305 306 1.00 0.95 5.0 1.00 1.05 10.0 1.50 1.35 15.0 2.10 1.75 25.0 2.10 1.55 35.0 TT 0.5 ● ● ● 30 32 28 0T 0.9 ● ● ● ● 22 32 20 1T 1.3 ● ● ● ● 20 26 18 2T 1.6 ● ● ● ● 18 22 14 3T 2.0 ● ● ● 16 18 12 0.80 0.95 3.0 1.20 0.90 8.0 1.30 1.55 12.0 2.40 1.85 17.0 1.90 1.50 25.0 TT 0.5 ● ● ● 30 32 28 0T 0.7 ● ● ● ● 22 32 22 1T 0.9 ● ● ● ● 22 32 20 2T 1.3 ● ● ● ● 20 26 18 3T 2.0 ● ● ● ● 16 18 12 0.80 0.65 2.0 0.85 0.70 7.0 1.35 1.45 10.0 1.85 1.85 15.0 1.45 1.25 19.0 TT 0.35 ● ● 30 0T 0.7 ● ● ● ● 22 32 22 1T 0.9 ● ● ● ● 22 32 20 2T 1.3 ● ● ● ● 20 26 18 3T 1.6 ● ● ● 18 22 14 0.75 1.00 1.7 1.00 0.70 6.5 1.25 1.15 9.0 1.75 1.60 14.0 1.90 1.25 19.0 TT 0.35 ● 30 1T 0.7 ● ● ● ● 22 32 22 0.60 0.75 1.5 0.85 0.65 2.5 1.05 1.20 7.0 Multipole Reference Solder contacts Crimp contacts Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. Contact type Solder contactAWG Crimp Test voltage (kV rms) Contact-contact Test voltage (kV rms) Contact-shell Rated current (A) 306 6 2T 1.3 ● ● ● ● 20 26 18 3T 1.6 ● ● ● ● 18 22 14 1.35 1.45 12.0 1.60 1.15 17.0 Note: 1) available only for connectors fitted with male contacts. ● First choice alternative ● Special order alternative

7www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. 307 308 308 309 310 1T 0.7 ● ● ● ● 22 32 22 2T 1.3 ● ● ● ● 20 26 18 3T 1.6 ● ● ● 18 22 14 0.80 0.70 2.5 0.95 1.05 7.0 1.75 1.60 11.0 1.70 1.25 15.0 2T 0.9 ● ● ● ● 22 32 20 3T 1.3 ● ● ● ● 20 26 18 0.90 1.50 2.5 1.45 1.30 8.0 1.25 0.90 12.0 1T 0.7 ● ● ● ● 22 32 22 0.95 1.15 5.0 2T 0.9 ● ● ● ● 22 32 20 3T 1.3 ● ● ● ● 20 26 18 1.50 1.25 10.0 1.65 1.15 13.0 3T ● ● ● 0.60 0.50 2.0 1.35 1.05 8x1.3 20 26 18 1x2.0 16 18 12 6.0 15.0 312 312 0T 0.35 ● ● 30 0.80 1.00 1.5 2T 0.7 ● ● ● ● 22 32 22 3T 0.9 ● ● ● ● 22 32 20 1.25 1.35 7.0 1.45 1.00 9.0 Note: 1) available only for connectors fitted with male contacts. Multipole Reference Solder contacts Crimp contacts Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. Contact type Solder contactAWG Crimp Test voltage (kV rms) Contact-contact Test voltage (kV rms) Contact-shell Rated current (A)

• First choice alternative ● Special order alternative

8 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. 314 316 316 318 1T 0.5 ● ● 28 0.80 1.25 1.5 2T 0.7 ● ● ● ● 22 32 22 3T 0.9 ● ● ● ● 22 32 20 0.95 1.25 6.0 1.20 0.85 8.0 2T 0.7 ● ● ● ● 22 32 22 3T 0.9 ● ● ● ● 22 32 20 0.85 1.20 5.5 1.20 1.05 7.0 1T 0.5 ● ● ● 28 2T 0.7 ● ● ● ● 22 32 22 3T 0.9 ● ● ● ● 22 32 20 0.80 1.20 2.0 1.15 1.35 6.5 1.20 1.20 9.0 320 319 2T 0.7 ● ● ● ● 22 32 22 0.95 1.25 5.0 3T 0.7 ● ● ● ● 22 32 22 1.00 0.90 6.0 322 3T 0.7 ● ● ● 22 32 22 1.00 0.90 5.5 324 3T 0.7 ● ● ● ● 22 32 22 0.95 0.80 4.0 326 26 2T 0.5 ● ● 28 3T 0.7 ● ● ● 22 32 22 0.95 1.30 2.0 0.95 0.70 4.0 Multipole Reference Solder contacts Crimp contacts Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. Contact type Solder contactAWG Crimp Test voltage (kV rms) Contact-contact Test voltage (kV rms) Contact-shell Rated current (A)

• First choice alternative ● Special order alternative

9www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. 3T 0.7 ● ● ● ● 22 32 22 0.80 0.70 3.5 330 332 2T 0.5 ● ● 28 0.80 1.20 1.5 1.0 1.2 1.3 1.5 1.6 2.0 2.1 2.5 2.6 3.0 3.1 3.5 3.6 4.0 4.1 4.5 4.6 5.0 C10 C15 C20 C25 C30 C35 C40 C45 C50 Cable ø (mm) min. max. Type Collets TT Cable ø (mm) min. max. Type Cable ø (mm) min. max. Type Cable ø (mm) min. max. Type 2.6 3.0 3.1 3.5 3.6 4.0 4.1 4.5 4.6 5.0 5.1 5.5 5.6 6.0 6.1 6.5 6.6 7.0 7.1 7.5 7.6 8.0 8.1 8.5 8.6 9.0 9.1 9.5 9.6 10.0 10.1 10.5 C30 C35 C40 C45 C50 C55 C60 C65 C70 C75 C80 C85 C90 C95 C10 C11 1.3 1.5 1.6 2.0 2.1 2.5 2.6 3.0 3.1 3.5 3.6 4.0 4.1 4.5 4.6 5.0 5.1 5.5 5.6 6.0 6.1 6.5 C15 C20 C25 C30 C35 C40 C45 C50 C55 C60 C65 1.3 1.5 1.6 2.0 2.1 2.5 2.6 3.0 3.1 3.5 3.6 4.0 4.1 4.5 4.6 5.0 5.1 5.5 5.6 6.0 6.1 6.5 6.6 7.0 7.1 7.5 7.6 8.0 8.1 8.5 C15 C20 C25 C30 C35 C40 C45 C50 C55 C60 C65 C70 C75 C80 C85 2.4 2.6 2.7 3.0 C27 C31 Multipole Reference Solder contacts Crimp contacts Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. Contact type Solder contactAWG Crimp Test voltage (kV rms) Contact-contact Test voltage (kV rms) Contact-shell Rated current (A)

• First choice alternative ● Special order alternative

10 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. ø (mm) Cond. AWG A C min. max. Fig. Types TT 302 / 303 / 304 0.5 0.45 1 32 28 0T 302 / 303 306 / 307 / 309 1.10 1 24 20 0.9 0.80 2 26 22 0.45 2 32 28 0.80 1 26 22 0.7 0.45 2 32 28 0.5 0.45 1 32 28 1T 302 / 303 306 / 307 / 308 310 / 314 / 316 1.40 1 20 18 1.3 1.10 2 24 20 1.10 1 24 20 0.9 0.80 2 26 22 0.80 1 26 22 0.7 0.45 2 32 28 0.5 0.45 1 32 28 2.40 1 16 12 2.0 1.90 2 18 14 1.90 1 18 14 1.6 1.40 2 22 18 1.40 1 20 18 1.3 1.10 2 24 20 0.80 2 26 22 1.10 1 24 20 0.9 0.80 2 26 22 0.45 2 32 28 0.80 1 26 22 0.7 0.45 2 32 28 FGG.0B.554.ZZC – FGG.1B.554.ZZC – 302 303 / 304 / 309 305 / 306 / 307 308 / 309 / 310 320 / 322 / 324 3.0 3.20 1 14 10 2.40 1 16 12 2.0 1.90 2 18 14 1.90 1 18 14 1.6 1.40 2 22 18 1.40 1 20 18 1.3 1.10 2 24 20 1.10 1 24 20 0.9 0.80 2 26 22 0.45 2 32 28 0.80 1 26 22 0.7 0.45 2 32 28 Contact part number Male Female 302 303 312 / 314 / 316 Insulator part number Male contact Female contact FGG.0B.30●.YL – FGG.1B.3●●.YL – Spare parts for crimp contacts

11www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. These positioners are suitable for use with both manual and pneumatic crimping tools according to the MIL-C- 22520/7-01 standard. male female ø A ø C ø A ø C Fig. 1 ø A ø C ø A ø C Fig. 2 FGG EGG FGG EGG Note: a wide variation of strand number and diameter combinations are quoted as being AWG, some of which do not have a large enough cross section to guarantee a crimp as per either MIL-C-22520/1-01 or /7-01. DCE Positioners ø 0.5, 0.7, 0.9, 1.3 mm DCE.91.202.BVCM DCE.91.162.BVCM DCE.91.303.BVCM DCE.91.203.BVCM DCE.91.163.BVCM Positioners part number Male contact Female contact Note: these turrets can be used with manual crimping tool according to MIL-C-22520/1-01 standard. DCE Turret for ø 1.6, 2.0, 3.0, 4.0 mm male female Note: each insulator can be used both for crimp contacts of normal shape (fig. 1) or with reduced solder cups (fig. 2). FGG-EGG Insulators FGG-EGG Crimp contacts Note: 2) this model is thumb-operated. Spare parts for crimp contacts DCF Automatic extraction tools Extractors part number for male/ female contacts DCF.91.050.2LT DCF.91.090.2LT DCF.92.070.3LT DCF.91.050.2LT DCF.91.131.2LT DCF.91.090.2LT DCF.91.070.2LT DCF.91.050.2LT DCC.91.202.5LA DCF.91.162.2LT DCF.91.131.2LT DCF.91.090.2LT DCF.91.070.2LT DCF.91.303.5LT DCC.91.202.5LA2) DCF.91.163.5LT DCF.91.133.5LT DCF.91.093.5LT DCF.91.073.5LT Types TT 302 / 303 / 304 0T 302 / 303 306 / 307 / 309 1T 302 / 303 306 / 307 / 308 310 / 314 / 316 3T 302 303 / 304 / 309 305 / 306 / 307 308 / 309 / 310 320 / 322 / 324 302 303 312 / 314 / 316 FGG EGG

12 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Spare parts e L ø B A Note: 3T series fixed and free sockets for back panel mounting are always delivered with a conical nut. To order this accessory separately, use the above part numbers. See page 17 for the tooling.

• Material: Chrome-plated brass (Ni 3 µm + Cr 0.3 µm) GEC Conical nuts TT Series GEC.00.240.LC GEC.0S.240.LC GEC.1S.240.LC GEC.2S.240.LC GEC.3S.240.LC Part number 8 10 M7 x 0.5 2.5 10 12 M9 x 0.6 2.5 13 16 M12 x 1.0 3.2 17 20 M15 x 1.0 3.8 20 24 M18 x 1.0 4.5 Dimensions (mm) A B e L ø C L ø A Note: to order this accessory separately, use the above part numbers. e L A øB Note: to order this part separately, use the above part numbers. The last letters «LN» of the part number refer to the nut material and treatment. If a nut in aluminium alloy or stainless steel is desired, replace the last letters of the part number by «PT» or «AZ» respectively. See page 17 for the tooling.
• Material: Nickel-plated bronze (3 µm) GBA Locking washers TT Series GBA.00.250.FN GBA.0S.250.FN GBA.1S.250.FN GBA.2S.250.FN GBA.3S.250.FN Part number 9.5 7.1 1.0 12.5 9.1 1.0 16.0 12.1 1.0 19.5 15.1 1.2 25.0 18.1 1.4 Dimensions (mm) A C L
• Material: Nickel-plated brass (3 µm), Natural anodized aluminium alloy, Stainless steel GEA Hexagonal nuts TT Series GEA.00.240.LN GEA.0S.240.LN GEA.1S.240.LN GEA.2S.240.LN GEA.3S.240.LN Part number 9 10.2 M7 x 0.5 2.0 11 12.4 M9 x 0.6 2.0 14 15.8 M12 x 1.0 2.5 17 19.2 M15 x 1.0 2.7 22 25.0 M18 x 1.0 3.0 Dimensions (mm) A B e L

13www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. e ø A ø B L ø B Le ø A Model 2 Model 1 Note: TT, 0T, 1T and 2T series fixed and free sockets for back panel mounting are always delivered with this notched nut. To order this accessory separately, use the above part numbers. See page 18 for the tooling.

• Material: Chrome-plated brass (Ni 3 µm + Cr 0.3 µm) GEG Notched nuts TT Series Model GEG.00.240.LC GEG.0S.240.LC GEG.1S.240.LC GEG.2S.240.LC Part number 8.6 10 M7 x 0.5 2.5 10.5 12 M9 x 0.6 2.5 14.0 16 M12 x 1.0 3.5 17.5 20 M15 x 1.0 3.5 Dimensions (mm) A B e L

14 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Accessories N ø A L B sliding loop BFG Blanking caps for plugs 7.0 4.0 9.0 60 9.5 5.0 11.0 85 12.0 6.0 12.4 85 15.0 6.0 13.8 85 18.8 6.0 17.6 120 Dimensions (mm) A B L N N ø 3.5 ø A L B BHG Blanking caps for fixed plugs

• Body material: Chrome-plated brass (Ni 3 µm)
• Lanyard material: Stainless steel
• Crimp ferrule material: Nickel-plated brass + polyolefin
• O-ring material: Silicone
• Maximum operating temperature: 135°C
• Watertightness: IP68 according to IEC 60529 BFG.TT.100.CAS BFG.0T.100.CAS BFG.1T.100.CAS BFG.2T.100.CAS BFG.3T.100.CAS Part number BHG.TT.100.CAS BHG.0T.100.CAS BHG.1T.100.CAS BHG.2T.100.CAS BHG.3T.100.CAS Part number N ø 3.5 ø A L M B BRE Blanking caps for sockets N ø A L M B sliding loop BRF Blanking caps for free sockets 7.0 6.5 10.5 2.5 60 9.5 7.7 12.7 2.7 85 12.0 9.5 14.4 3.5 85 15.0 10.4 16.3 4.4 85 18.8 11.4 20.2 5.4 120 Dimensions (mm) A B L M N
• Body material: Chrome-plated brass (Ni 3 µm)
• Lanyard material: Stainless steel
• Crimp ferrule material: Nickel-plated brass + polyolefin
• Maximum operating temperature: 135°C
• Watertightness: IP68 according to IEC 60529 BRF.TT.200.CAZ BRF.0T.200.CAZ BRF.1T.200.CAZ BRF.2T.200.CAZ BRF.3T.200.CAZ Part number BRE.TT.200.CAZ BRE.0T.200.CAZ BRE.1T.200.CAZ BRE.2T.200.CAZ BRE.3T.200.CAZ Part number

15www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. ø A L N ø B

• Material: CuSnZn plated brass (2 µm) GCA Earthing washers TT Series GCA.00.255.LT GCA.0S.255.LT GCA.1S.255.LT GCA.2S.255.LT GCA.3S.255.LT Part number 9.5 7.1 0.4 18.2 13.0 9.1 0.4 22.0 17.0 12.2 0.5 27.5 20.0 15.2 0.5 32.0 25.0 18.2 0.5 39.0 Dimensions (mm) A B L N L ø A Bend relief (TPU) 2.5 22 2.5 2.8 2.8 22 2.8 3.1 3.2 22 3.2 3.5 2.5 22 2.5 2.8 2.8 22 2.8 3.1 3.2 22 3.2 3.5 GMB.00.025.DG GMB.00.028.DG GMB.00.032.DG GMD.00.025.DG GMD.00.028.DG GMD.00.032.DG Bend relief Cable ø A L min. max. 4.0 36 4.0 4.5 4.5 36 4.5 5.0 5.0 36 5.0 5.5 6.0 36 6.0 6.5 7.0 36 7.0 7.7 7.8 36 7.8 8.8 GMA.2B.040.DG GMA.2B.045.DG GMA.2B.050.DG GMA.2B.060.DG GMA.2B.070.DG GMA.2B.080.DG 4.5 42 4.5 5.2 6.0 42 6.0 6.9 7.0 42 7.0 7.9 8.0 42 8.0 8.9 9.0 42 9.0 10.0 GMA.3B.050.DG GMA.3B.060.DG GMA.3B.070.DG GMA.3B.080.DG GMA.3B.090.DG Part number Bend relief Cable ø A L min. max. Part number Note: all dimensions are in millimetres. blue white grey A B G ColourRef. yellow brown black J M N ColourRef. red orange green R S V ColourRef. Note: the last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table above and replace the letter «G» by the letter of the required colour. 2.5 24 2.5 2.9 3.0 24 3.0 3.4 3.5 24 3.5 3.9 4.0 24 4.0 4.4 4.5 24 4.5 5.2 GMA.0B.025.DG GMA.0B.030.DG GMA.0B.035.DG GMA.0B.040.DG GMA.0B.045.DG 2.5 30 2.5 2.9 3.0 30 3.0 3.4 3.5 30 3.5 3.9 4.0 30 4.0 4.4 4.5 30 4.5 4.9 5.4 30 5.4 6.0 6.5 30 6.5 7.0 GMA.1B.025.DG GMA.1B.030.DG GMA.1B.035.DG GMA.1B.040.DG GMA.1B.045.DG GMA.1B.054.DG GMA.1B.065.DG TT A bend relief made from thermoplastic polyurethane elas- tomer can be fitted over LEMO plugs and sockets that are supplied with nut for fitting such bend relief. They are available in nine different colours match with the GRA insulating washers. Use the part numbers shown below to order this accessory separately.

16 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Tooling DCG Spanners for hexagonal nuts N L ø B

• Material: blackened steel TT Series DCG.91.149.0TN DCG.91.161.1TN DCG.91.201.4TN DCG.91.231.7TN DCG.91.282.2TN Part number 14 40 50 16 45 52 20 52 65 23 62 68 28 76 73 Dimensions (mm) B L N 10.1 12.8 124 48.3 12.1 14.8 124 49.3 16.1 21.0 124 51.9 20.1 22.8 129 53.5 Dimensions (mm) A B L N GEA.00.240.LN GEA.0S.240.LN GEA.1S.240.LN GEA.2S.240.LN GEA.3S.240.LN Part number of the nut N L max ø B DCA Spanners for hexagonal nuts with locator for flats on socket thread
• Material: blackened steel TT Series DCA.91.149.0TN DCA.91.161.1TN DCA.91.201.4TN DCA.91.231.7TN DCA.91.282.2TN Part number 14 65 50 16 73 52 20 85 65 23 100 68 28 120 73 Dimensions (mm) B L N GEA.00.240.LN GEA.0S.240.LN GEA.1S.240.LN GEA.2S.240.LN GEA.3S.240.LN Part number of the nut L N ø A ø B DCH Spanners for conical nuts
• Material: dark grey polyurethane TT Series DCH.91.101.PN DCH.91.121.PN DCH.91.161.PN DCH.91.201.PN Part number GEC.00.240.LC GEC.0S.240.LC GEC.1S.240.LC GEC.2S.240.LC Part number of the nut

17www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. N M L DCP Set of flat spanners for collet nuts 95 2.5 21 7.55 7.05 95 2.5 25 11.05 9.05 115 3.0 30 14.05 12.05 115 3.0 35 16.05 14.05 Dimensions (mm) L M N S1 S2 10.1 12.8 124 48.3 12.1 14.8 124 49.3 16.1 21.0 124 51.9 20.1 22.8 129 53.5 Dimensions (mm) A B L N L N ø A ø B DCH Spanners for notched nuts

• Material: blue polyurethane TT Series TT TT TT Series DCH.91.101.PA DCH.91.121.PA DCH.91.161.PA DCH.91.201.PA Part number GEG.00.240.LC GEG.0S.240.LC GEG.1S.240.LC GEG.2S.240.LC Part number of the nut M L N
• Material: chrome-plated steel DCP Flat spanners for collet nut DCP.99.050.TC DCP.99.055.TC DCP.99.060.TC Part number 78 2 12.6 5.0 78 2 12.6 5.5 78 2 12.6 6.0 Dimensions (mm) L M N S1 Series DCP.0T.110.TN DCP.0T.110.TN DCP.2T.110.TN DCP.2T.110.TN Part number
• Material: blackened steel

18 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Pneumatic crimping tools 1) According to specification MIL-C-22520/7-01. 2) According to specification MIL-C-22520/1-01. Manual crimping tools Fig. A Fig. B Crimping tools for electrical contacts LEMO DANIELS ASTRO Supplier MH8601) AF82) 6163361) 6157082) Part number contact ø 0.5-0.7 contact ø 1.6-2.0 0.9-1.3 (Fig. A) (Fig. B) According to specification MIL-C-22520/7-01. For LEMO contacts ø 0.5-0.7-0.9-1.3 mm LEMO BALMAR BUCHANAN SupplierPart number DPC.91.701.C 85230 621101 Contact Test ø A force (N) F DCK Retention testing tools for crimp contacts 0.5-0.7-0.9 and 1.3 mm diameter 0.5 8 0.7 10 0.9 14 1.3 25 Testing tool part number For male For female contact contact

19www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Fixed socket with straight print contact PCB drilling pattern 0.6 1.35 120° 0.8 2.30 120° 0.8 3.00 120° 0.8 4.60 120° 0.8 5.60 120° TT Dimensions A B C Series 0.6 1.2 0.8 2.2 0.8 2.8 0.8 4.4 TT Dimensions A B Series 0.6 3.0 60° 0.8 3.7 60° Dimensions A B C Series 0.8 5.6 72° 0.8 7.1 72° Dimensions A B C Series 0.8 3.8 51°26’1T Dimensions A B C Series ø A ø B 302 ø Aø B 303 ø A ø B 305 ø A ø B 307 ø A ø B 304 ø A ø BC° 306 ø A ø B 308 ø A ø B 306 ø A ø B 309 ø A ø B 308 H ø B ø A 310 0.6 3.2 45° 0.8 7.5 45° Dimensions A B C Series 0.8 6.4 45° 0.8 7.5 45° Dimensions A B C Series 0.6 3.95 45° 22°30’ 1.40 0.8 6.30 45° 22°30’ 2.15 0.8 7.90 45° 22°30’ 2.80 Dimensions A B C D H Series 0.5 1.7 72° 0.6 2.8 72° 0.8 3.4 72° 0.8 5.2 72° 0.8 6.7 72° TT Dimensions A B C Series 0.6 1.6 45° 0.6 2.5 45° 0.8 3.1 45° 0.8 5.0 45° 0.8 6.2 45° TT Dimensions A B C Series 0.6 3.00 60° 0.8 3.70 60° 0.8 5.80 60° 0.8 7.08 60° Dimensions A B C Series Note: all views are from the side of the socket. ø A 120° ø H ø B 312 0T 0.5 3.3 40° 20° 1.25 Dimensions A B C D H Series

20 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. 0.6 4.4 90° 1.90 1.80 0.8 6.5 90° 2.65 2.65 0.8 8.2 90° 3.40 3.40 Dimensions A B C H I Series 0.6 4.4 32°44’ 2.01T Dimensions A B D H Series 36° 36° H ø B ø A I 314 72° ø A ø B ø H 316 0.8 6.7 60° 30° 15° 3.52T Dimensions A B C D E H Series ø B ø H ø 0.6 ø E 324 ø H ø 8.8 ø 0.6 322 90° ø 0.62.6 ø 5.7 2.2 ø 9 11°15' 36° 22°30' 3T.330 ø 5.6 ø 2.1 ø 9 ø 0.6 40° 25°43' 120° 3T.326 E°C° ø A ø B ø H 318 ø A ø B ø H 319 Note: all views are from the side of the socket. 72° ø A ø B ø H 316 ø H ø 0.6 ø B 320 ø 4.2 ø 1.6 ø 7 ø 0.6 40° 25°43' 120° 2T.326 36° ø 2.2 ø 0.6 4.6 ø 7 72° 21°11' 2T.332 Dimensions A B D E H Series 0.8 6.7 60° 30° 15° 3.50 0.8 8.4 60° 30° 15° 4.34 Dimensions A B C D E H Series 8.62 51°26’ 27°42’ 4.783T Dimensions B C D H Series 45° 25°43’ 22°30’ 53T Dimensions C D E H Series 8.8 45° 25°43’ 1.8 5.303T Dimensions B C D E H Series Metal collet nut tightening torque 0.25 0.70 0.80 Maximum metal collet nut tightening torque TT Series 2.00 3.00 Maximum metal collet nut tightening torque Series 0.8 6.50 45° 22°30’ 2.80 0.8 8.20 45° 22°30’ 3.40 Dimensions A B C D H Series ø A ø H ø B 312

21www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. 306/307/309 312 0.5 7.0 5 2.5 0.35 7.0 5 2.5 306/307/308 310/314/316 1.3 10.5 7 3.5 14.5 7 4.0 0.5 13.0 7 2.5 302 303 304/305/306/307 312/314/316/318/319 2.0 16.5 8 4.0 19.5 8 5.5 0.5 14.5 8 2.5 Reference S T L ø contact (mm) Cable assembly Cable stripping lengths (mm) Solder Crimp L S T L S T 302 303 304 302 305/306/307 309 312/314/316/318 320/322/324/326/330 17.0 10 20.0 10 1.3 3.5 4.0 2.0 4.0 5.5 TT

22 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Terminating of plugs with solder contacts and cable collet Cable preparation 1. Strip the cable according to the given dimensions. (The end of the cable jacket must be cut properly). Cable termination 2. Slide it into the collet nut ➀, the collet ➁, the gland ➂ and the earthing cone ➃. 3. In case of a screened cable, fold screen back over the extremity of the earthing cone. Arrange the conductors according to the insulator ➄ marking by avoiding to twist them. Fit conductor into the contacts ➅ and solder. Verify that insulator and insulation remain clean. 4. Locate the slotted upper half ➆ of the split insert carrier over the shoulder and key on the insulator then align and press together the other half ➇ to form a complete cylinder. Push the earthing cone against the insert carriers whilst checking that the screen is being clamped around the whole circumference and cut, if nec- essary, the excess screen. Push the gland, and collet against the earthing cone. Push the cable forward and verify that cable jacket is located under the gland. 5. Next slide the plug shell ➈ over the insulator assembly making sure that the key on the insert carrier goes into the keyway (under the color point) inside the shell. Locate the key of the collet into the slot of the shell. Finally screw the collet nut with the appropriate tool and tighten to the maximum torque value (see page 20). Solder ➂ ➃

23www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Note:

24 www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Note:

25www.lemo.com ® ® DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. Note:

Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com LEMO SUBSIDIARIES LEMO DISTRIBUTORS AUSTRALIA, CHILE, CZECH REPUBLIC, GREECE, INDIA, ISRAEL, NEW ZEALAND, POLAND, RUSSIA, SOUTH AFRICA, SOUTH KOREA, TAIWAN, TURKEY, UKRAINE www.lemo.com AUSTRIA LEMO Elektronik GesmbH Lemböckgasse 49/E6-3

1230 Wien

Tel: (+43 1) 914 23 20 0 Fax:(+43 1) 914 23 20 11 sales@lemo.at BRAZIL LEMO Latin America Ltda Av. José Rocha Bonfim,

214 Salas 224 / 225

Condomínio Praça Capital Ed. Chicago Campinas / SP - Brasil 13080-650 Tel: +55 (11) 98689 4736 info-la@lemo.com CANADA LEMO Canada Inc

44 East Beaver Creek Road, unit 20

Richmond Hill, Ontario L4B 1G8 Tel: (+1 905) 889 56 78 Fax: (+1 905) 889 49 70 info-canada@lemo.com CHINA / HONG KONG LEMO Electronics (Shanghai) Co., Ltd First Floor, Block E,

18 Jindian Road, Pudong

Shanghai, China, 201206 Tel: (+86 21) 5899 7721 Fax: (+86 21) 5899 7727 cn.sales@lemo.com DENMARK LEMO Denmark A/S Gammel Mosevej 46

2820 Gentofte

Tel: (+45) 45 20 44 00 Fax: (+45) 45 20 44 01 info-dk@lemo.com FRANCE LEMO France Sàrl 24/28 Avenue Graham Bell Bâtiment Balthus 4 Bussy Saint Georges

77607 Marne la Vallée Cedex 3

Tel: (+33 1) 60 94 60 94 Fax: (+33 1) 60 94 60 90 info-fr@lemo.com GERMANY LEMO Elektronik GmbH Hanns-Schwindt-Str. 6

81829 München

Tel: (+49 89) 42 77 03 Fax: (+49 89) 420 21 92 info@lemo.de HUNGARY REDEL Elektronika Kft Nagysándor József u. 6-12

1201 Budapest

Tel: (+36 1) 421 47 10 Fax: (+36 1) 421 47 57 info-hu@lemo.com ITALY LEMO Italia srl Viale Lunigiana 25

20125 Milano

Tel: (+39 02) 66 71 10 46 Fax: (+39 02) 66 71 10 66 sales.it@lemo.com JAPAN LEMO Japan Ltd 2-7-22, Mita, Minato-ku, Tokyo, 108-0073 Tel: (+81 3) 54 46 55 10 Fax: (+81 3) 54 46 55 11 lemoinfo@lemo.co.jp MIDDLE EAST LEMO Middle East Gen. Trad. LLC Concorde Tower 6th Floor, Dubai Media City, P.O. Box 126732 Dubai, United Arab Emirates Tel: +971 55 222 36 77 info-me@lemo.com NETHERLANDS / BELGIUM LEMO Connectors Benelux De Trompet 1060

1967 DA Heemskerk

Tel. (+31) 251 25 78 20 Fax (+31) 251 25 78 21 info@lemo.nl NORWAY / ICELAND LEMO Norway A/S Stanseveien 6B, 0975 Oslo Tel: (+47) 22 91 70 40 Fax: (+47) 22 91 70 41 info-no@lemo.com SINGAPORE LEMO Asia Pte Ltd

4 Leng Kee Road,

#06-09 SiS Building Singapore 159088 Tel: (+65) 6476 0672 Fax: (+65) 6474 0672 sg.sales@lemo.com SPAIN / PORTUGAL IBERLEMO SAU Brasil, 45, 08402 Granollers Barcelona Tel: (+34 93) 860 44 20 Fax: (+34 93) 879 10 77 info-es@lemo.com SWEDEN / FINLAND LEMO Nordic AB Mariehällsvägen 39A 168 65 Bromma Tel: (+46 8) 635 60 60 Fax: (+46 8) 635 60 61 info-se@lemo.com SWITZERLAND LEMO Verkauf AG Grundstrasse 22 B

6343 Rotkreuz

Tel: (+41 41) 790 49 40 ch.sales@lemo.com UNITED KINGDOM LEMO UK Ltd 12-20 North Street, Worthing, West Sussex, BN11 1DU Tel: (+44 1903) 23 45 43 lemouk@lemo.com USA LEMO USA Inc P.O. Box 2408 Rohnert Park, CA 94927-2408 Tel: (+1 707) 578 88 11 (+1 800) 444 53 66 Fax:(+1 707) 578 08 69 info-US@lemo.com © CAT.MT.LEN.P0115, updated April 2017