PHE-3FB3-RYG PATLITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Model: PHE-3FB3□-RYG F Page SPECIFICATIONS Product Name: Interface Converter Drawing No. Rev.

UL/cUL Recognized Component : PHE-3FB3N-RYG AC Adaptor Input: 100VAC - 240VAC (50/60Hz) Output: 24VDC Page 1. General Specifications PHE-3FB3-RYG ( AC Adaptor included ) PHE-3FB3N-RYG ( AC Adaptor not included )Model Drawing No. Operating Voltage Range 90VAC - 264VAC (AC Adaptor) Rev. PHE-3FB3-W18 F Rated Voltage 24VDC (Main Unit) 5VDC (USB Bus Power) Rated Power Consumption Standby 1.2W (100VAC) 0.9W (24VDC) 0.2W (5VDC) Maximum 4.4W (100VAC) 3.9W (24VDC) 1.4W (5VDC) Operating Ambient Temperature 0℃ - +40℃ (No Dew or Condensation) Operating Ambient Humidity 20% - +85% RH (No Dew or Condensation) Storage Ambient Temperature -10℃ - +60℃ (No Dew or Condensation) Storage Ambient Humidity 20% - +85% RH (No Dew or Condensation) Mounting Location Indoor Only Mounting Direction Upright Tint Film (NHP-TF) Protection Rating IP 20 Insulation Resistance More than 10MΩ at 500VDC between live part and non-current carrying metallic part *1 Withstand Voltage 1500VAC applied for 1min (10mA or less) between live part and non-current carrying metallic part without breaking insulation *1 Condition Outer Dimensions Refer to the Outer Dimension Drawing Environmental Front direction from the center, at 1m Serial Port Asynchronous (Baud Rate: 9600bit/s, No Parity,Communication method Sound Pressure Level 80dB or more Serial Port USB Port CDC (Communication Device Class) protocol Stop bit: 1bit, Data length: 8bit, No Flow control) Conformity Standards Signal Tower Clear Lens Type Accessories Conforms to the UKCA Requirements UL/cUL Listed : PHE-3FB3-RYG Option Operating portion "Clear" Switch, "Set" Switch, "Buzzer" Switch AC Adaptor *1, Installation Manual, Rubber feet (4 pcs.), Sound Reduction sheet RoHS Directive (EN IEC 63000) EMC Directive (EN 61000-6-4 (Class A), EN 61000-6-2) FCC Part15 Subpart B Class A, ICES-003 Class A UL 60950-1 CAN/CSA C22.2 No.60950-1 PSE Compliant AC Adaptor USB2.0 Conformity (Bus-powered) Standard Type (Female) RS-232C Conformity D-Sub 9 pin (Male) Mass (Tolerance ±10%) 545g (AC Adaptor not include) Remark *1 : N type excluded Interface USB Port Conforms to the CE Requirements

2.1. Model Number Configuration 2.2. Model Number List 3.1. Information (Main Unit) 4.1. Main Unit Control Function Buzzer Control PHE Command "Clear" Switch F PHU Command Buzzer pattern 2 Buzzer pattern 3 Buzzer pattern 4 4. Function Specification Signal Tower Control ON and OFF can be controlled Signal Tower Controllable with PHE Command or PHU Command ON and Flashing and OFF can be controlled Lighting pattern for each color LED units, such as continuous lighting, flashing pattern 1, and flashing pattern 2 ON(800ms), OFF(800ms) (repetition) ON(120ms), OFF(280ms), ON(120ms), OFF(1080ms) (repetition) ON(240ms), OFF(160ms), ON(240ms), OFF(960ms) (repetition) ON(continuity) PHE Command Flashing pattern 1 Flashing pattern 2 Controllable with PHE Command ON and Pattern and OFF can be controlled Signal Tower OFF and Buzzer OFF can be controlled Buzzer Four kind of buzzer sounds, such as buzzer pattern1, 2, 3, and 4 ON(40ms), OFF(40ms) (repetition) ON(800ms), OFF(800ms) (repetition) Buzzer pattern 1 3. Action Specification Page 2. Model PHE-3FB3-RYG PHE-3FB3N-RYG Drawing No. Rev. PHE-3FB3-W18 LED Unit Color R Y AC Adaptor G From top to bottom AC Adaptor included Red Amber Green Signal Tower Tiers 3 3 tiers None N AC Adaptor not included □ - R Y GBP H E - 3 F 3/5

4.2. Main Unit Status Acquisition Function 4.3. Main Unit Setting Function Signal Tower Status, Buzzer Status Normal Operation PHU Compatible Identification number for identifying the main body can be set Page Buzzer Setting Buzzer ON and Buzzer OFF can be selected using "Buzzer" Switch Buzzer volume can be selected using DIP Switch in Buzzer Unit. Firmware Update Firmware Version, Identification number, Switch Status Status acquisition This mode is used to update main unit firmware. Identification Number Setting Body Unit Information acquisition Operation Mode Setting Normal Operation Mode, PHU Compatible Mode, Firmware Update Mode It is a mode that operates with the PHU command. Drawing No. Rev. PHE-3FB3-W18 F It is a mode that operates with the PHE command.

株式会社 パトライト 5/5PHE-3FB3-W18