PHC21025 NEXPERIA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 16
Technical content
1.1 General description
industrial applications only.
1.2 Features and benefits
1.3 Applications
1.4 Quick reference data
Table 1. Quick reference data
PHC21025 All information provided in this document is subject to legal disclaimers. thermal resistance from ambient to solder point of 90 K/W. Table 1. Quick reference data …continued Table 2. Pinning information
2 G1 gate1
4 G2 gate2
Table 3. Ordering information
PHC21025 All information provided in this document is subject to legal disclaimers. [1] Pulse width and duty cycle limite d by maximum junction temperature. [3] Maximum permissible dissipation per MOS transistor. Both devices may be loaded up to 2 W at the same time. from ambient to solder point of 90 K/W. to solder point of 27.5 K/W. [6] Pulse width and duty cycle limite d by maximum junction temperature. Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).
© Nexperia B.V. 2017. All rights reserved PHC21025 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 04 — 17 March 2011 4 of 16 Nexperia PHC21025 Complementary intermediate level FET δ = 0.01. Ts = 80 °C. (1) RDSon limitation. Fig 1. Power derating curve Fig 2. SOAR; N-channel δ = 0.01 Ts = 80 °C. (1) RDSon limitation. Fig 3. SOAR; P-channel 0 200 2.5 0.5 1.0 1.5 2.0 mlb836 Ts (°C) 50 100 150 Ptot (W) mlb833 102 11 0 VDS (V) ID (A) 10−1 10−1 10210−2 0.1 s 1 ms DC (1) tp = 10μs tp tp T P t Tδ = mbe155−102 −10−1 −10−2 −10 VDS (V) ID (A) 0.1 s 1 ms DC (1) tp = 10 μs tp tp T P t Tδ =
PHC21025 All information provided in this document is subject to legal disclaimers. Table 5. Thermal characteristics
PHC21025 All information provided in this document is subject to legal disclaimers. Table 6. Characteristics
PHC21025 All information provided in this document is subject to legal disclaimers. Table 6. Characteristics …continued
© Nexperia B.V. 2017. All rights reserved PHC21025 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 04 — 17 March 2011 8 of 16 Nexperia PHC21025 Complementary intermediate level FET Fig 5. Capacitance as a function of drain-source voltage; N-channel; typical values Fig 6. Capacitance as a function of drain-source voltage; P-channel; typical values Fig 7. Output characteristics: drain current as a function of drain-source voltage; N-channel; typical values Fig 8. Output characteristics: drain current as a function of drain-source voltage; P-channel; typical values 600 400 200 10 20 30 mbe137 C (pF) VDS (V) Ciss Coss Crss 600 400 200 −10 −20 −30 mbe144 C (pF) VDS (V) Ciss Coss Crss 0 2 10 12 mbe142 468 VDS (V) ID (A) 5 V 4 V 3 V VGS = 10 V 4.5 V 3.5 V 6 V 0 −2 −10 −12 −10 mbe154 −4 −6 −8 VDS (V) ID (A) −7.5 V −6 V −5 V −4.5 V −4 V −3.5 V −3 V −2.5 V VGS = −10 V
© Nexperia B.V. 2017. All rights reserved PHC21025 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 04 — 17 March 2011 9 of 16 Nexperia PHC21025 Complementary intermediate level FET Fig 9. Transfer characteristics: drain current as a function of gate-source voltage; N-channel; typical values Fig 10. Transfer characteristics: drain current as a function of gate-source voltage; P-channel; typical values Fig 11. Gate-source voltage as a function of gate charge; N-channel; typical values Fig 12. Gate-source voltage as a function of gate charge; P-channel; typical values 024 8 mbe141 ID (A) VGS (V) 0 −2 −4 −8 −10 mbe157 ID (A) VGS (V) 024 8 mbe136 QG (nC) VGS (V) 0 −2 −4 −10−8 −10 mbe145 Qg (nC) VGS (V)
© Nexperia B.V. 2017. All rights reserved PHC21025 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 04 — 17 March 2011 10 of 16 Nexperia PHC21025 Complementary intermediate level FET VGD = 0. (1) Tj = 150 °C. (2) Tj = 25 °C. (3) Tj = -55 °C. VGD = 0. (1) Tj = 150 °C. (2) Tj = 25 °C. (3) Tj = -55 °C. Fig 13. Source current as a function of source-drain voltage; N-channel; typical values Fig 14. Source current as a function of source-drain voltage; P-channel; typical values VDS ≥ ID x RDSon; Tj = 25 °C. (1) ID = 0.1 A. (2) ID = 0.5 A. (3) ID = 1 A. (4) ID = 2.2 A. (5) ID = 3.5 A. (6) ID = 7 A. -VDS ≥ -ID x RDSon; Tj = 25 °C. (1) ID = -0.1 A. (2) ID = -0.5 A. (3) ID = -1 A. (4) ID = -2.3 A. (5) ID= -4.5 A. Fig 15. Drain-source on-state resistance as a function of drain current; N-channel; typical values Fig 16. Drain-source on-state resistance as a function of drain current; typical values 0 0.5 1 1.5 mbe159 IS (A) VSD (V) (1) (2) (3) 0 −0.5 −1 −2−1.5 mbe158 IS (A) VSD (V) (1) (2) (3) 100 (1)(2) (6) VGS (V) RDSon (mΩ) 2468 104 103 102 mda217 (3)(4)(5) −100 VGS (V) RDSon (mΩ) −2 −4 −6 −8 104 103 102 mda165 (1) (4) (5)(2)(3)
© Nexperia B.V. 2017. All rights reserved PHC21025 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 04 — 17 March 2011 11 of 16 Nexperia PHC21025 Complementary intermediate level FET Typical VGSth at ID = 1 mA; VDS = VGS = VGSth. Typical RDSon at: (1) ID = 2.2 A; VGS = 10 V. (2) ID = 1 A; VGS = 4.5 V. Fig 17. Temperature coe fficient of gate-source threshold voltage Fig 18. Temperature coefficient of drain-source on-state resistance; N-channel Typical RDSon at: (1) ID = -1 A; VGS = -10 V. Fig 19. Temperature coefficient of drain-source on-state resistance; P-channel 0.6 0.7 0.8 0.9 1.0 1.2 1.1 0 50 100 150−50 k T j (°C) mbe138 0.6 0.8 1.0 1.2 1.4 1.8 1.6 0 50 100 150−50 k mbe139 (1) (2) Tj (°C) 0.6 0.8 1.0 1.2 1.4 1.8 1.6 0 50 100 150−50 k T j (°C) mbe146 (1) (2)
© Nexperia B.V. 2017. All rights reserved PHC21025 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 04 — 17 March 2011 12 of 16 Nexperia PHC21025 Complementary intermediate level FET 7. Package outline Fig 20. Package outline SOT96-1 (SO8) UNIT A max. A1 A2 A3 bp cD (1) E(2) (1)eH E LL p QZ y w v θ REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 5.0 4.8 4.0 3.8 1.27 6.2 5.8 1.05 0.7 0.6 0.7 0.3 8 o o 0.25 0.10.25 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. 1.0 0.4 SOT96-1 X w M θ AA1 bp D HE Lp Q detail X E Z e c L v M A (A )3 A pin 1 index y 076E03 MS-012 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.20 0.19 0.16 0.15 0.05 0.244 0.228 0.028 0.024 0.028 0.016 0 2.5 5 mm scale SO8: plastic small outline package; 8 leads; body width 3.9 mm SOT96-1 99-12-27 03-02-18
PHC21025 All information provided in this document is subject to legal disclaimers. Table 7. Revision history Modifications: • Various changes to content.
© Nexperia B.V. 2017. All rights reserved PHC21025 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 04 — 17 March 2011 14 of 16 Nexperia PHC21025 Complementary intermediate level FET 9. Legal information
9.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com .
9.2 Definitions
Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request vi a the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer , unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet.
9.3 Disclaimers
Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia accepts no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Applications — Applications that are described herein for any of these products are for illustrative purpos es only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to av oid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms , unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective Document status [1] [2] Product status [3] Definition Objective [short] data sheet Development This document contai ns data from the objective specification for product development. Preliminary [short] data sheet Qua lification This document contains data from the preliminary specification. Product [short] data sheet Production This doc ument contains the product specification.
© Nexperia B.V. 2017. All rights reserved PHC21025 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 04 — 17 March 2011 15 of 16 Nexperia PHC21025 Complementary intermediate level FET agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific Nexperia product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia accepts no liabili ty for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia’s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Nexperia’s specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia for any liability, damages or failed product claims resulting from customer design and use of the product for automotive app lications beyond Nexperia’s standard warranty and Nexperia’s product specifications .
9.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 10. Contact information For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com
Complementary intermediate level FET 11. Contents © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: