PHA-202 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Ultra High IP3, +46.1 dBm
  • Broadband High Dynamic Range without external Matching Components
  • Medium power, 1W
  • Excellent return loss over 15 dB Product Overview The PHA-202+ (RoHS compliant) is a medium power amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PHA-202+ has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability. It has repeatable performance from lot to lot and is enclosed in a 5mm x 6mm, 8 lead package for very good thermal performance. Feature Advantages Broad Band: 0.03 to 2.7 GHz Broadband covering primary wireless communications bands: Cellular, PCS, LTE Extremely High IP3 Versus DC power Consumption 46 dBm typical at 1.0 GHz The PHA-202+ matches industry leading IP3 performance relative to device size and power consumption. The combination of the design and E-PHEMT Structure provides enhanced linearity over a broad frequency range as evidence in the IP3 being typically 14-23 dB above the P1dB point. This feature makes this amplifier ideal for use in:
  • Driver amplifiers for complex waveform up converter paths
  • Drivers in linearized transmit systems
  • Secondary amplifiers in ultra High Dynamic range receivers No External Matching Components Required Unlike competing products, Mini-Circuits PHA-202+ provides Input and Output Return Loss of over 15 dB up to 2 GHz without the need for any external matching components PHA-202+ Key Features 50Ω 0.03 to 2.7 GHz CASE STYLE: DL1636

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits simplified schematic and pin description Function Pin Number Description RF-IN 2 RF input RF-OUT and DC-IN 7 RF output and DC input GND Paddle Ground NC 1,3-6,8 No connection 0.03-2.7 GHz CASE STYLE: DL1636 PHA-202+ Product Features

  • High IP3, 46.1 dBm typ. at 1 GHz
  • Gain, 17.0 dB typ. at 1 GHz
  • High Pout, P1dB 30.4 dBm typ. at 1 GHz
  • No external matching components required REV. OR M159004 PHA-202+ RS/GY/CP 170830 General Description The PHA-202+ (RoHS compliant) is a medium power amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PHA-202+ has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability. It has repeatable performance from lot to lot and is enclosed in a 5mm x 6mm, 8 lead package for very good thermal performance. Typical Applications
  • Base station infrastructure
  • CATV
  • LTE RF-IN RF-OUT and DC-IN GND +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Monolithic E-PHEMT MMIC Amplifier PHA-202+ Absolute Maximum Ratings6 Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Junction Temperature 179°C Power Dissipation 5.8W Input Power (CW) +24 dBm (5 minutes max.) +19 dBm (continuous) DC Voltage on Pin 7 14V 6. Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation. 1. Measured on Mini-Circuits Characterization test board MB018. See Characterization Test Circuit (Fig. 1) 2. Measured on Mini-Circuits Application test board TB-962+. See Characterization Test Circuit (Fig. 2) 3. Tested at Pout=16dBm / tone. 4. (Current at 85°C — Current at -45°C)/130 5. (Current at 11.5V-current - Current at 10.5V)/1000 Electrical Specifications at 25°C, 50 ohms, unless noted Parameter Condition (MHz) Vd=11V1 Vd=11V2 Units Min. Typ. Max. Typ. Frequency range 0.03 2.7 0.03-2.7 GHz Gain 30 — 18.3 — 18.3 dB 500 — 17.9 — 17.7 1000 — 17.0 — 16.8 2000 13.2 14.7 16.1 14.3 2700 — 12.7 — 12.1 Input return loss 30 21.2 20.5 dB 500 21.7 25.5 1000 19.5 28.6 2000 20.3 17.7 2700 14.9 12.0 Output return loss 30 15.1 15.5 dB 500 16.4 15.2 1000 19.4 15.7 2000 22.5 19.1 2700 9.8 9.4 Reverse isolation 2000 23 23.3 dB Output power @1dB compression 30 28.4 29.2 dBm 500 30.2 29.8 1000 30.4 29.8 2000 28.1 27.0 2700 25.7 25.2 Output IP33 30 51.0 50.3 dBm 500 48.5 48.8 1000 46.1 46.2 2000 43.2 41.7 2700 39.4 38.8 Noise figure 30 3.2 3.0 dB 500 3.3 3.0 1000 3.5 3.3 2000 4.4 4.3 2700 5.4 5.2 Device operating voltage 11 11 V Device operating current — 350 416 335 mA Device current variation vs. temperature4 188.6 188.6 µA/°C Device current variation vs voltage5 0.0485 0.0485 mA/mV Thermal Resistance, junction-to-ground lead at 85°C stage temp. 16.1 16.1 °C/W

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Monolithic E-PHEMT MMIC Amplifier PHA-202+ Characterization Test Circuit Product Marking MCL P202index over pin 1 Fig 1. Characterization Circuit Note: This block diagram is used for characterization. (DUT soldered on Mini-Circuits Characterization test board MB018) Gain, Return loss, Output power at 1dB compression (P1 dB), output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 16 dBm/tone at output. Recommended Application Circuit Marking may contain other features or characters for internal lot control Fig 2. Application Circuit Note: (DUT soldered on Mini-Circuits Application test board TB-962+) Gain, Return loss, Output power at 1dB compression (P1 dB), output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 16 dBm/tone at output. Component P/N SUPPLIER Value Size C1, C2, C3 GRM155R71E103KA01D MURATA 0.01uF 0402 L1 WA8514-AE COILCRAFT 5.6uH 1708

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Monolithic E-PHEMT MMIC Amplifier PHA-202+ MSL Test Flow Chart Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style DL1636 Plastic package, exposed paddle lead finish: Matte Tin Tape & Reel F68 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices 13” reels with 2K, 3K, 4K devices Suggested Layout for PCB Design PL-522 Evaluation Board TB-962+ Environmental Ratings ENV08T1 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start Finish Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp ESD Rating Human Body Model (HBM): Class 1B (Pass 500V) in accordance with ANSI/ESD STM 5.1 - 2001 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D