PHA-1 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 1 of 2 The Big Deal

  • Ultra High IP3
  • Broadband High Dynamic Range without external Matching Components
  • May be used as a replacement to WJ AH1a,b Product Overview PHA-1+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PHA-1+, unlike competitive models, has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability. Lead finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance. Feature Advantages Broad Band: 0.05 to 6.0 GHz Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX Extremely High IP3 Versus DC power Consumption 42 dBm typical at 2 GHz The PHA-1+ matches industry leading IP3 performance relative to device size and pow- er consumption. The combination of the design and E-PHEMT Structure provides en - hanced linearity over a broad frequency range as evidence in the IP3 being typically 20 dB above the P 1dB point. This feature makes this amplifier ideal for use in:
  • Driver amplifiers for complex waveform up converter paths
  • Drivers in linearized transmit systems
  • Secondary amplifiers in ultra High Dynamic range receivers No External Matching Components Required Unlike competing products, Mini-Circuits PHA-1+ provides Input and Output Return Loss of 14-21 dB up to 4 GHz without the need for any external matching components Low Noise Figure: 2.3dB typ. up to 4 GHz 3.5dB typ. up to 6 GHz A unique feature of the PHA-1+ which separates this design from all competitors is the low noise figure performance in combination with the high dynamic range. PHA-1+ Key Features Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The WJ AH1 part number is used for identification and comparison purposes only. * X-parameters is a registered trademark of Agilent Technologies, Inc. The X-parameters format and underlying equations are open and documented. For more information, refer to X-parameters Open Documentation, Trademark Usage & Partnerships 50Ω 0.05 to 6 GHz ☛ LTE Performance ☛ TD-SCDMA Performance SOT -89 PACKAGE FREE X-Parameters*

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 2 of 2 simplified schematic and pin description Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Ap- plication Circuit”, Fig. 2 GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. 0.05-6 GHz CASE STYLE: DF782 PHA-1+ Product Features

  • High IP3, 42 dBm typ. at 2 GHz, 5V
  • Gain, 13.5 dB typ. at 2 GHz, 5V
  • High Pout, P1dB 22 dBm typ. at 2 GHz, 5V
  • Low noise figure, 2.2 dB @2 GHz, 5V
  • Usable to 4.0V
  • No external matching components required
  • May be used as replacement for WJ AH1a,b REV. E M151107 PHA-1+ TH/RS/CP/AM 150924 General Description PHA-1+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PHA-1+ has good input and output return loss over a broad frequency range without the need for external matching components. Lead finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance. Typical Applications
  • Base station infrastructure
  • Portable Wireless
  • CATV & DBS
  • MMDS & Wireless LAN
  • LTE RF-IN RF-OUT and DC-IN GND Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The WJ AH1 part number is used for identification and comparison purposes only. ☛ LTE Performance ☛ TD-SCDMA Performance

3 RF-OUT & DC-IN

2 GROUND

1 RF-IN

+RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

Monolithic E-PHEMT MMIC Amplifier Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 3 of 4 Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Operating Current at 5V 210 mA Power Dissipation 1 W Input Power (CW) 24 dBm DC Voltage on Pin 3 6 V Note: Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation. Absolute Maximum Ratings Electrical Specifications at 25°C, unless noted PHA-1+ (1) Measured on Mini-Circuits Characterization test board TB-313. See Characterization Test Circuit (Fig. 1) (2) Measured on Mini-Circuits test fixture 90-6-20-26 characterization Circuit (Fig.1), except replace TB-313 with 90-6-20-26 (3) (Current at 85°C — Current at -45°C)/130 DC Current Histogram 110 115 120 125 130 135 140 145 150 155 160 165 170 175 DC Current (mA) LSL USL Parameter Condition (GHz) Vd=5.0V(1) Vd=4.5V(2) Vd=4.0V(2) Units Input Return Loss 0.05 — 11.7 — 10.7 10.6 dB Output Return Loss 0.05 — 14.5 — 13.7 13.5 dB Reverse Isolation 2.0 19.9 19.3 18.9 dB Output IP3 0.05 — 41.4 — 36.8 34.4 dBm Noise Figure 0.05 1.7 1.9 1.8 dB 1.0 1.9 2.3 2.1 2.0 2.2 2.4 2.2 3.0 2.3 2.5 2.5 4.0 2.7 3.0 2.9 6.0 3.5 3.7 3.6 Device Operating Current 110 146 180 119 95 mA Device Current Variation vs. Temperature(3) -12 68 67 µA/°C Device Current Variation vs Voltage 0.054 0.052 0.052 mA/mV Thermal Resistance, junction-to-ground lead 60 60 60 °C/W

Monolithic E-PHEMT MMIC Amplifier Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 4 of 4 PHA-1+ Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-313) Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 5 dBm/tone at output. Characterization Test Circuit RF-IN RF-OUT3 Vcc (Supply voltage) BLK-18+ Bias-Tee ZX85-12G-S+ DUT TB-313 2,4 +5V PHA1 Recommended Application Circuit Cblock IN Cblock Ibias OUT Vd RFC Cbypass Vcc Fig 2. Test Board includes case, connectors, and components soldered to PCB Product Marking Marking may contain other features or characters for internal lot control

Monolithic E-PHEMT MMIC Amplifier Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 5 of 5 PHA-1+ MSL Test Flow Chart ESD Rating Human Body Model (HBM): Class 1A (250 to <500V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 (>25V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style DF782 (SOT 89) Plastic package, exposed paddle lead finish: tin/silver/nickel Tape & Reel F55 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices Suggested Layout for PCB Design PL-313 Evaluation Board TB-545-1+ Environmental Ratings ENV08T1 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here