PH9400.111NL PULSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
P774.C (07/16) pulseelectronics.com High Isolation Gate Drive Transformers Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C Part Number Turns Ratio ET (V * µsec MAX) Core Loss Factor Primary Inductance (1-4) (mH +/-35%) Leakage Inductance Drive to Gate (µH MAX) Parasitic Capacitance Drive to Gate (pF MAX) DCR Drive (1-4) (Ω MAX) DCR Gates (5-6) (7-8) (Ω MAX) Hi-Pot Drive-Gate (Vrms) Gate-Gate (Vrms) PH9400.XXXNL PH9400.XXXANL Notes: 1. The max ET is calculated to limit the core loss and temperature rise at 100KHz based on a bipolar flux swing of 2100Ga Peak. This value needs to be derated for higher frequencies using the temperature rise calculation. 2. The temperature rise of the component is calculated based on the total core loss and copper loss: A. To calculate total copper loss (W), use the following formula: Copper Loss (W) = Irms * (DCR_Drive + (# of Gates) * DCR_Gates) B. To calculate total core loss (W), use the following formula: Copper Loss (W) = 5.1E-10 * (Frequency in kHz) * (K1 * ET) Where ET = (V * Duty Cycle) / Frequency Basic and Reinforced Insulation Patent Pending Sidecar package with 12mm creepage Up to 5000Vrms gate to drive isolation 600Vrms Voltage rating 3. ANL versions, which use triple insulated wire on both the drive and gate windings, are compliant with IEC 60950, IEC 61558, IEC 61010 & IEC 60601 for reinforced insulation. NL versions, which use triple insulated wire on just the drive winding, comply with basic insulation requirements. 4. 12mm package creepage distance satisfies IEC60950-1 & IEC61558-1/-2-16 reinforced insulation requirements for working voltage to 600Vrms max, OVC II, Pollution Degree 2 and altitude up to 2000m. 5. Unless otherwise specified, all testing is made at 100kHz, 0.1VAC. 6. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number reel specification EIA481. 1.42 2.5 PH9400.XXXNL and PH9400.XXXANL - SMT - Basic Insulation - Reinforced Insulation C. To calculate temperature rise, use the following formula: Temperature Rise (C) = 71 * (Core Loss(W) + Copper Loss (W))
pulseelectronics.com High Isolation Gate Drive Transformers P774.C (07/16) PH9400.XXXNL and PH9400.XXXANL Mechanicals Schematics PH9400.XXXNL/PH9400.XXXANL DRIVE GATE GATE PH9400.XXXNL and PH9400.XXXANL - SMT For More Information Pulse Worldwide Headquarters
12220 World Trade Drive
San Diego, CA 92128 U.S.A. Tel: 858 674 8100 Fax: 858 674 8262 Pulse Europe Pulse Electronics GmbH Am Rottland 12
58540 Meinerzhagen
Tel: 49 2354 777 100 Fax: 49 2354 777 168 Pulse China Headquarters B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Road High-Tech Zone Nanshan District Shenzhen, PR China 518057 Tel: 86 755 33966678 Fax: 86 755 33966700 Pulse North China Room 2704/2705 Super Ocean Finance Ctr.
2067 Yan An Road West
Tel: 86 21 62787060 Fax: 86 2162786973 Pulse South Asia
135 Joo Seng Road
#03-02 PM Industrial Bldg. Singapore 368363 Tel: 65 6287 8998 Fax: 65 6287 8998 Pulse North Asia 3F, No. 198 Zhongyuan Road Zhongli City Taoyuan County 320 Taiwan R. O. C. Tel: 886 3 4356768 Fax: 886 3 4356823 (Pulse) Fax: 886 3 4356820 (FRE) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2016. Pulse Electronics, Inc. All rights reserved. Dimension: Inches mm .010 0,25Unless otherwise specified, all tolerances are ± .024 [0.60] .161 [4.10] (.500) [(12.70)] .650 MAX [16.50 MAX] .004 MIN [0.10 MIN] (.557) [(14.15)] SUGGESTED PAD LAYOUT .005[0.127] .559 MAX [14.20 MAX] .657 MAX [16.70 MAX] .502 [12.75] .659 [16.75] .161 [4.10] .079 [ 2.00]