PH08XXCNL PULSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

1 power.pulseelectronics.com P773.H (02/18) http:/ /www.power.pulseelectronics.com/contact HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS PH08XXCNL Series (up to 160W) Power Rating: up to 160 W Height: 9.1mm to 10.1mm Max Footprint: 24.7mm x 21.6mm Max Frequency Range: 200kHz to 700kHz Isolation (Primary to Secondary): 1500 VDC Patented: US Pat 9378885 PH08XXCNL Mechanicals Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C Part³ Number Turns Schematic Primary ¹ Inductance (µ MIN) Leakage² Inductance (µ MAX) DCR (mΩ MAX) Maximum Height (mm)Primary A Primary B Secondary Primary A Primary B Secondary PH0801CNL 4T 4T (1T:1T:1T:1T) A1 153 0.45 8.5 8.5 PH0802CNL 4T 5T 194 0.45 8.5 12.5 9.1 PH0803CNL 5T 5T 240 0.55 12.5 12.5 7 PH0804CNL 5T 6T 290 0.60 12.5 14.2 PH0805CNL 6T 6T 345 0.65 14.2 14.2 PH0806CNL 4T 4T 1T & 1T A2 153 0.45 8.5 8.5 PH0807CNL 4T 5T 194 0.55 8.5 12.5 9.1 PH0811CNL 4T 4T 2T & 1T A3 PH0814CNL 5T 6T 290 0.65 12.5 14.2 PH0815CNL 6T 6T 345 0.85 14.2 14.2 10.1 9.6 PART NUMBER SEE TABLE FOR HEIGHT Dimensions: Unless otherwise specified, all tolerances are ± Inches mm .010 0.25

2 power.pulseelectronics.com P773.H (02/18) http:/ /www.power.pulseelectronics.com/contact HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS PH08XXCNL Series (up to 160W) Notes: 1. Inductance is measured with both primary windings connected in services (2 to 5, with 3 and 4 shorted). 2. Leakage inductance is measured on winding (2-5) with (3-4) and (7, 8, 9, 10, 11) shorted. 3. The “NL” suffix indicates an RoHS-compliant part number. 4. It is possible to add a primary side aux.winding to any of the above configurations as shown in the schematics. Transformers with primary side aux. winding are non- standard and can be made available upon request. The primary aux. winding can be between 2 and 16 turns. To add a primary aux. winding to a given base, use the extension .xxx. For example, to add a 4T aux. winding to the base part number PH0801CNL, use the part number PH0801.004CNL. The height increases to 10.1mm MAX for PH0810.xxxCNL. For the other part numbers there is no change to the height.. 5. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the 6. To determine if the transformer is suitable for your application, it is necessary to ensure that the temperature rise of the component (ambient plus temperature rise) not exceed its operating temperature. To determine the approximate temperature rise of the transformer, refer to the graphs below. PH08XXCNL Schematics Tape & Reel Layout for PH08XXCNL A2 A3A1

3 power.pulseelectronics.com http:/ /www.power.pulseelectronics.com/contact Pulse Worldwide Headquarters

15255 Innovation Drive Ste 100

San Diego, CA 92128 U.S.A. Tel: 858 674 8100 Fax: 858 674 8262 Pulse Europe Pulse Electronics GmbH Am Rottland 12

58540 Meinerzhagen

Tel: 49 2354 777 100 Fax: 49 2354 777 168 Pulse China Headquarters Pulse Electronics (ShenZhen) CO., LTD D708, Shenzhen Academy of Aerospace Technology, The 10th Keji South Road, Nanshan District, Shenzhen, P .R. China 518057 Tel: 86 755 33966678 Fax: 86 755 33966700 Pulse North China Room 2704/2705 Super Ocean Finance Ctr.

2067 Yan An Road West

Tel: 86 21 62787060 Fax: 86 2162786973 Pulse South Asia

3 Fraser Street

0428 DUO Tower

Tel: 65 6287 8998 Fax: 65 6280 0080 Pulse North Asia 1F., No.111 Xiyuan Rd Zhongli City Taoyuan City 32057 Taiwan (R.O.C) Tel: 886 3 4356768 Fax: 886 3 4356820 For More Information Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2018. Pulse Electronics, Inc. All rights reserved. P773.H (02/18) HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS PH08XXCNL Series (up to 160W) 3