PGSMC TUK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

 Category 6A Class EA Field Termination Plug, with 568A/B and PNO wiring label  Robust industrial fully shielded design  Works with solid or stranded cable  Suitable for use with a wide range of cable outer diameter and core sizes – 6-9mm cable OD, 22-27 AWG cores (core including insulation up to OD 1.6mm)  Reusable (27AWG cable only reusable up to 5 times)  No tools required for time saving and efficient termination on site  Rated for 750 mechanical cycles  Note: not ideal for short length (4m or less) Category 6A patch cords Specifications  Materials: o RJ45 plug: housing: nickel plated zinc-alloy, contacts: 50µ”/1.27µm gold plating over phosphor bronze plug cover: ABS, plug latch: POM o RJ45 jack: housing nickel plated zinc-alloy o IDC: housing and cover: PC FR, terminals/contacts: tin plated phosphor bronze o Earthing plate: SUS304 o Strain relief: PP 17/05/2016

Fan out all four twisted pairs, following the color coding label and allocate each conductors into proper slots on wiring cap. Trim the ends of conductors. Remove the wiring label before place wiring cap on plug. Place the wiring cap onto plug, use plier to clamp wiring cap until it completely snap-in to effect the connection. Close plug cover, make sure the drain wire is in proper contact with grounding clip on plug. Pull back strain relief boot to cover the plug, fasten supplied cable tie to secure grounding contact. Insert cable into strain relief boot, strip off 1.2 inch of cable jacket, fold back the drain wire. Remove the stopper before installation. Cover Stopper Open shielded cap Cut off cable tie, remove the boot. Using flat screw driver and pry gently on plug cover one end first and the other end subsequently to open it. Unload the cable Cut the end of boot to fit your cable OD. Boot adjustment T568A T568B INDUSTRIAL T568A T568B INDUSTRIAL T568A T568B INDUSTRIAL Wiring Label Remove boot 1.2"(30mm) Drain Wire Cable Tie Cut off cable tie NB.Designed for lengths of 4m or more. Shorter lengths may not have full Category 6A performance PGSmc