PGN-SP-001 COMUS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
PICTURE FEATURES APPLICATIONS © 2009 Copyright Assemtech Europe Limited Unit 7, Rice Bridge Indutrial Estate, Thorpe-le-Soken, Essex, England CO16 OHL Website: www.assemtech.co.uk USA: +(1) 973 777 6900 - UK: +44 (0) 1255 862236 - Belgium: + 32 (0)12 390400 - France: + 33 (0) 1 43 96 86 10 TAKE A LOOK AT OUR VARIETY OF PRODUCTS Float Switches Acceleration / Shock Switches Movement Sensors Tilt / Tip Switches Reed Relays Solid State Relays High Breakdown Switches Reed Switches Magnets Electronic Tilt / Tip Over Low Cost Non-Mercury Rubber Keymats Page Part Number : Product Data Sheet REV. NO. REVISION NOTE DATE SIGNATURE A Datasheet Update October 2009 LG As part of the company policy of continued product improvement, specifications may change without notice. Our sales office wil be pleased to help you with the latest information on this product range and the details of our full design and manufacturing service. All products are supplied to our standard conditions of sale unless otherwise agreed in writing. PGN-SP-001 Magnet VCC (red) Pull-up Resistor Output (green) Ground (black) 0.250±.030 (6.35±0.76) ø0.115 (ø2.92) See Detail A Approximate Sensing Location 0.642 (16.31)0.015 (0.38) 2X 45° X 0.120 (3.05)0.228 (5.79) 0.680 (17.27) Active Surface 0.115 (2.92) 2X R 0.130 (3.30) 0.075 (1.91) Approximate Label Location 0.324 (8.23) 47.8 2X R 0.104 (2.64) 0.105 (2.67) 0.210 (5.33) Detail A Leads = 24 AWG PVC UL1569, pre-tinned. All tolerances 0.007 (0.18) unless otherwise noted. 12±0.75 (304.8±19.05) TECHNICAL SPECIFICATIONS
Electrical Characteristics
Operating Voltage Range 4.5 - 24 VDC Supply Current 5.2 mA Max. Output 3-wire sink Output Saturation Voltage 400 mV Max. Output Current 20 mA Max. Operating Characteristics Operating Temperature -40 to 85 °C Function Unipolar Switch Operate Point 185 (south) Gauss Max. Release Point 60 (south) Gauss Min. Digital Hall-Effect Proximity Sensor in Low-Profile Flange-Mount Housing Magnet VCC (red) Pull-up Resistor Output (green) Ground (black) 0.250±.030 (6.35±0.76) ø0.115 (ø2.92) See Detail A Approximate Sensing Location 0.642 (16.31)0.015 (0.38) 2X 45° X 0.120 (3.05)0.228 (5.79) 0.680 (17.27) Active Surface 0.115 (2.92) 2X R 0.130 (3.30) 0.075 (1.91) Approximate Label Location 0.324 (8.23) 47.8 2X R 0.104 (2.64) 0.105 (2.67) 0.210 (5.33) Detail A Leads = 24 AWG PVC UL1569, pre-tinned. All tolerances 0.007 (0.18) unless otherwise noted. 12±0.75 (304.8±19.05) Note : These sensors require the use of an external pull-up resistor, the value of which is dependent on the supply voltage. Pull-up resistor should be connected between output (Green) and Vcc (Red). Note 2: Unipolar switch output turns low in presence of magnetic south pole. Bipolar latch output latches high in presence of magnetic south poles and latches low in presence of magnetic north pole. Drawings not to scale. All Dimension in mm(in) nominal DIMENSIONS OPEN COLLECTOR Sinking Block Diagram - Capable of millions of operations - Meets IEC529 IPX5 for water protection - Reverse Battery Protection to -24 VDC - South pole activated unipolar switching - Equivalent to: Cherry MP040 - Door position sensing - Flow sensing - Pedal Switch