PGFT-12V55 POWER-SONIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

PERFORMANCE SPECIFICATIONS Nominal Voltage 12 volts (6 cells) Nominal Capacity 20-hr. (3.03A to 10.80 volts) 10-hr. (5.71A to 10.80 volts) 5-hr. (10.5A to 10.50 volts) 3-hr. (15.7A to 9.60 volts) 1-hr. (38.1A to 9.60 volts) 60.6 AH 57.1 AH 51.9 AH 47.1 AH 38.1 AH Approximate Weight 39.7 lbs. (18.0 kg) Internal Resistance (approx.) 6.0 milliohms Max Short-Duration Discharge Current (10 Sec.) 600 amperes Shelf Life (% of nominal capacity at 68°F (20°C)

1 Month

3 Month

6 Month

97% 91% 83% Operating Temperature Range Charge Discharge Case ABS Plastic TERMINALS: (mm) DIMENSIONS: inch (mm) www.power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E CORPORATE HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation

7550 Panasonic Way, San Diego,

T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: customer-service@power-sonic.com POWER-SONIC EUROPE LIMITED (EMEA – EUROPE, MIDDLE EAST AND AFRICA)

3 Buckingham Square,

Hurricane Way, Wickford, Essex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: salesEMEA@power-sonic.com

FEATURES

  • Absorbent Glass Mat (AGM) technology for superior performance
  • Superb high-rate discharge characteristics ensures reliable performance in UPS and telecom applications
  • Proven valve regulated technology that guarantees safe operation without maintenance
  • Rugged impact resistant ABS case and cover (available to UL94:V-0)
  • Thick plate design and efficient gas recombination yield a service life of 10 – 12 years in standby mode
  • Front terminal design suited for 19" & 21" cabinets APPROVALS and C.A.B. certified
  • U.L recognized
  • ISO9001:2015 – Quality management systems HT L W L: 10.91 (277) W: 4.17 (106) H: 8.74 (222) HT: 8.74 (222) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. UPS Data Center Telecomms Emergency Lighting Utility Rev1: 11/18 PGFT-12V55 12V 60.6 AH @20-hr. 12V 57.1 AH @ 10-hr. Rechargeable Sealed Lead Acid Battery PG FT – Long Life Front Terminal Series T6: Threaded insert with 6mm stud fastener Torque: 3.9~5.4 Nxm 16mm 6mm T6: Threaded insert with 6mm stud fastener Torque: 3.9~5.4 Nxm 16mm 6mm T6: Threaded insert with 6mm stud fastener Torque: 3.9~5.4 Nxm 16mm 6mm

www.power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E CORPORATE HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: customer-service@power-sonic.com POWER-SONIC EUROPE LIMITED (EMEA – EUROPE, MIDDLE EAST AND AFRICA) Hurricane Way, Wickford, Essex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: salesEMEA@power-sonic.com CYCLE LIFE IN RELATION TO DEPTH OF DISCHARGE GENERAL RELATION OF CAPACITY VS. STORAGE TIME 0.5 Battery Temperature Float Life (Year) Effect of Temperature on Long Term Float Life 100 Standing Period (months) Capacity Retention Ratio (%) Shelf Life & Storage 104 122 0 2 4 6 8 10 12 14 16 18 20 Charging voltage: 2.25V/cell 5°C (41°F) 40°C (104°F) 30°C (86°F) 20°C (68°F) Charging is not necessary unless 100% of capacity is required. Charging before use is necessary to help recover full capacity. Charge may fail to restore full capacity. Do not let batteries reach this state. 0.5 Battery Temperature Float Life (Year) Effect of Temperature on Long Term Float Life 100 Standing Period (months) Capacity Retention Ratio (%) Shelf Life & Storage 104 122 0 2 4 6 8 10 12 14 16 18 20 Charging voltage: 2.25V/cell 5°C (41°F) 40°C (104°F) 30°C (86°F) 20°C (68°F) Charging is not necessary unless 100% of capacity is required. Charging before use is necessary to help recover full capacity. Charge may fail to restore full capacity. Do not let batteries reach this state. PGFT-12V55 12V 60.6 AH @20-hr. 12V 57.1 AH @ 10-hr. Rechargeable Sealed Lead Acid Battery PG FT – Long Life Front Terminal Series CHARGING Cycle Applications: Apply constant voltage charge at Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Temperature Compensation: Charging Voltage for both Cyclic and Standby applications should be regulated in relation to ambient temperature. As temperature rises charging voltage should be reduced to prevent overcharge and increased as temperature falls to avoid undercharge. For further charging information including temperature compensation factors, see Power Sonic Technical Manual/ Power Sonic Charger specifications.

APPLICATIONS

A whole range of CYCLIC applications including but not limited to:

  • UPS
  • Data Center CHARGERS Power Sonic offers a wide range of chargers suitable for batteries with a variety of capacities. Please refer to our website for more information on our switch mode and transformer type chargers. Please contact our technical department for advice if you have difficulty in locating a suitable charger. FURTHER INFORMATION Please refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc.
  • Telecommunications
  • Emergency Lighting
  • Utility Rev1: 11/18