PGA-122-75 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal Product Overview PGA-122-75+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range with low noise figure and flat gain. Lead finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance. Feature Advantages Application circuit for 5 to 200 MHz available Supports bandwidth requirements for upstream CATV applications. See application note AN-60-087. Recommend Evaluation Board, TB-885+ High IP3 Versus DC power Consumption: 43 dBm typical at 0.5 GHz The PGA-122-75+ matches industry leading IP3 performance relative to device size and power consumption. The combination of the design and E-PHEMPT structure provides enhanced linearity over a broad frequency range as evidence in the IP3 being typically 15-20 dB above the P 1dB point. This feature makes this amplifier ideal for use in CATV applications. High IP2, 54 dBm at 0.5 GHz Suppresses second order product on wideband applications such as CATV Low Noise Figure, 2.9 dB at 0.5 GHz Low noise figure performance in combination with the high output IP3 results in high dynamic range. Excellent CSO/CTB* CSO, -59 dBc CTB, -80 dBc Measured at channel 78 Competitive performance at lower current and supply voltage. PGA-122-75+ Key Features 75Ω 5 to 1500 MHz SOT -89 PACKAGE

  • High IP3
  • Flat Gain / Excellent Return Loss
  • Low Noise Figure Flat Gain, High Dynamic Range *78 channels flat, 30 dBmv/channel at output, 6 MHz channel spacing.

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits simplified schematic and pin description Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Ap- plication Circuit”, Fig. 2 GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. 5-1500 MHz CASE STYLE: DF782 PGA-122-75+ Product Features

  • High IP3, 43 dBm typ. at 0.5 GHz
  • Gain, 15.6 dB typ. at 0.5 GHz
  • High Pout, P1dB 73.1 dBmV typ. at 0.5 GHz
  • Low Noise Figure, 2.9 dB at 0.5 GHz
  • Usable over 5-200 MHz REV. OR M151478 PGA-122-75+ TH/RS/CP 170406 General Description PGA-122-75+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT* technol- ogy and offers extremely high dynamic range over a broad frequency range and with low noise figure and flat gain. In addition, the PGA-122-75+ has excellent input and output return loss over a broad frequency range. Lead finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance. Typical Applications
  • CATV, DOCSIS 3.1
  • GPON
  • MOCA
  • DBS 75Ω Flat Gain, High Dynamic Range *Enhanced mode pseudomorhic High Electron Mobility Transistor.

Monolithic E-PHEMT MMIC Amplifier Page 3 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits PGA-122-75+ 1. Measured on Mini-Circuits Characterization Eval board TB-859+. See Characterization Test Circuit (Fig. 1) 2. Output IP2 measured at sum frequency of the two tones (f meas= f1+f2). 3. Junction to ground lead. 4. (Current at 85°C - Current at -45°C)/130 Electrical Specifications at 25°C, 75Ω and 9V1 unless noted Parameter Condition (GHz) Vd=9V Vd=8V UnitsMin. Typ. Max. Typ. Frequency range 0.04 1.5 0.04-1.5 GHz Gain 0.04 — 15.5 — 15.5 dB 0.5 — 15.6 — 15.6 1.25 — 15.4 — 15.3 1.5 — 15.1 — 15.0 Gain flatness over 0.04-1.25 ±0.1 ±0.1 dB Input return loss 0.04 17.8 17.6 dB 0.5 21.2 20.8 1.0 18.7 18.0 1.25 16.1 15.9 1.5 14.2 13.8 Output return loss 0.04 19.8 20.2 dB 0.5 24.3 24.1 1.0 16.4 16.7 1.25 13.0 13.0 1.5 10.0 9.8 Reverse isolation 1.0 21.0 21.0 dB Output IP3 0.04 43.3 42.3 dBm 0.5 43.2 43.6 1.0 41.4 39.9 1.25 38.8 37.0 1.5 37.9 35.4 Output IP22 0.04 59.5 56.9 dBm 0.5 54.9 53.0 1.0 58.5 57.5 1.25 52.2 50.1 1.5 49.4 47.2 Noise figure 0.04 2.9 3.0 dB 0.5 2.9 2.8 1.0 2.8 2.9 1.25 3.0 2.9 1.5 3.0 3.2 Device operating voltage 8.5 9.0 9.5 8.0 V Device operating current — 115 140 102 mA Device current variation vs temperature4 22 25 µA°/C Device current variation vs voltage 0.0146 0.0146 mA/mV Thermal resistance, junction-to-ground lead3 30 30 °C/W Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Operating Current at 9.0V 167 mA Power Dissipation 1.5 W Input Power (CW) +20 dBm over 40-1200 MHz, and +24 dBm over 1200-1500 MHz (5 minutes) +17 dBm over 40-1200 MHz, and +20 dBm over 1200-1500 MHz (continuous) DC Voltage on Pin 3 11 V Absolute Maximum Ratings5 5. Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation.

Monolithic E-PHEMT MMIC Amplifier Page 4 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits PGA-122-75+ Fig 1. Block Diagram of Test Circuit used for characterization. (DUT tested on Mini-Circuits Characterization Eval board TB-859+) Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3), output IP2 (OIP2) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 5 dBm/tone at output. 3. Output IP2 (OIP2): Two tones, spaced 11 MHz apart, 5 dBm/tone at output. Characterization Test Circuit Recommended Application Circuit (TB-850+) Product Marking Fig 2. Evaluation board includes case, connectors, and components soldered to PCB Note: R1, D3 and Q1 are for reverse voltage protection and may be ommited. TB-859+ P122 Marking may contain other features or characters for internal lot control

Monolithic E-PHEMT MMIC Amplifier Page 5 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits PGA-122-75+ MSL Test Flow Chart ESD Rating Human Body Model (HBM): Class 1A (250 to <500) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 (25V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) 5-200 MHz Operation See Application Note AN-60-087 Case Style DF782 (SOT 89) Plastic package, exposed paddle lead finish: tin-silver over nickel Tape & Reel F55 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices Suggested Layout for PCB Design PL-477 Evaluation Board TB-850+ (40-1500 MHz) TB-885+ (5-20 MHz) Environmental Ratings ENV08T1 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start Finish Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp