PGA-102 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 1 of 5 The Big Deal Product Overview PGA-102+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addi - tion, the PGA-102+ has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability. Lead finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal perfor - mance. Feature Advantages Broad Band: 0.05 to 6.0 GHz Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX High IP3 Versus DC power Consumption: 33 dBm typical at 2 GHz at +3.3V Supply Voltage and only 83mA The PGA-102+ provides good IP3 performance relative to device size and power con - sumption. The combination of the design and E-PHEMT Structure provides enhanced linearity over a broad frequency range as evidence in the IP3 being typically 15 dB above the P 1dB point. This feature makes this amplifier ideal for use in:

  • Driver amplifiers for complex waveform up converter paths
  • Drivers in linearized transmit systems
  • Secondary amplifiers in ultra High Dynamic range receivers No External Matching Components Required Unlike competing products, Mini-Circuits PGA-102+ provides Input and Output Return Loss of 16-19 dB up to 4 GHz without the need for any external matching components Low Noise Figure: 2.3 dB up to 0.8 GHz A unique feature of the PGA-102+ which separates this design from all competitors is the low noise figure performance in combination with the high dynamic range. PGA-102+ Key Features 50Ω 0.05 to 6 GHz SOT -89 PACKAGE
  • High IP3
  • Broadband High Dynamic Range without external Matching Components Ultra High Dynamic Range ☛ LTE Performance

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 2 of 5 simplified schematic and pin description Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Ap- plication Circuit”, Fig. 2 GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. 0.05-6 GHz CASE STYLE: DF782 PGA-102+ Product Features

  • 3.3V, 83mA operation
  • High IP3, 33 dBm typ. at 2 GHz
  • Gain, 14.0 dB typ. at 2 GHz
  • P1dB 17.5 dBm typ. at 2 GHz
  • Low noise figure, 2.4dB at 2 GHz
  • No external matching components required REV. B M151107 PGA-102+ TH/RS/CP 150924 General Description PGA-102+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PGA-102+ has good input and output return loss over a broad frequency range without the need for external matching components. Lead finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance. Typical Applications
  • Base station infrastructure
  • Portable Wireless
  • CATV & DBS
  • MMDS & Wireless LAN
  • LTE

3 RF-OUT & DC-IN

2 GROUND

1 RF-IN

Low Noise, High IP3 ☛ LTE Performance +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Monolithic E-PHEMT MMIC Amplifier Page 3 of 5 Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Operating Current at 3.3V 300 mA Power Dissipation 1.0 W Input Power (CW) 28 dBm DC Voltage on Pin 3 5.5 V Note: Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation. Absolute Maximum Ratings Electrical Specifications1 at 25°C, 50Ω and 3.3V, unless noted PGA-102+ Parameter Condition (GHz) Min. Typ. Max. Units Frequency Range 0.05 6 GHz Gain 0.05 — 17.7 — dB 0.8 14.4 15.9 17.4 2.0 — 14.0 — 3.0 — 12.5 — 4.0 — 11.5 — 6.0 — 10.4 — Input Return Loss 0.05 — 14.0 — dB 0.8 15 18.4 — 2.0 — 12.4 — 3.0 — 10.5 — 4.0 — 9.4 — 6.0 — 6.7 — Output Return Loss 0.05 — 18.3 — dB 0.8 15 18.6 — 2.0 — 17.6 — 3.0 — 17.1 — 4.0 — 15.3 — 6.0 — 11.0 — Reverse Isolation 2.0 21.9 dB Output Power @1 dB compression 0.05 — 17.6 — dBm 0.8 16.0 17.4 — 2.0 — 17.5 — 3.0 — 17.5 — 4.0 — 17.3 — 6.0 — 16.5 — Output IP3 0.05 30.8 dBm 0.8 32.7 2.0 33.0 3.0 33.0 4.0 33.4 6.0 33.2 Noise Figure 0.05 2.1 dB 0.8 2.3 2.0 2.4 3.0 2.8 4.0 3.0 6.0 3.9 Device Operating Voltage 3.1 3.3 3.5 V Device Operating Current 60 83 120 mA Device Current Variation vs. Temperature 49 µA/°C Device Current Variation vs Voltage 0.066 mA/mV Thermal Resistance, junction-to-ground lead 73 °C/W 1. Measured on Mini-Circuits Characterization test board TB-313. See Characterization Test Circuit (Fig.

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Monolithic E-PHEMT MMIC Amplifier Page 4 of 5 PGA-102+ Fig 1. Block Diagram of Test Circuit used for characterization. (DUT tested on Mini-Circuits Characterization test board TB-313) Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 10 MHz apart, 2.5 dBm/tone at output. Characterization Test Circuit PGA1 Recommended Application Circuit Fig 2. Evaluation board includes case, connectors, and components soldered to PCB Product Marking RF-IN RF-OUT3 Vcc (Supply voltage) BLK-18+ Bias-Tee ZX85-12G-S+ DUT TB-313 2,4 +3.3V Cblock=0.001µF, Bias-Tee=TCBT-14+, Cbypass=0.1µF

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Monolithic E-PHEMT MMIC Amplifier Page 5 of 5 PGA-102+ Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start MSL Test Flow Chart ESD Rating Human Body Model (HBM): Class 1B (500 to <1000V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1(50V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Attention Observe precautions for handling electrostatic sensitive devices Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style DF782 (SOT 89) Plastic package, exposed paddle lead finish: tin-silver over nickel Tape & Reel F55 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices Suggested Layout for PCB Design PL-313 Evaluation Board TB-596-1+ Environmental Ratings ENV08T1 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here