PG640480FRT-ANN-I POWERTIP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 18
Technical content
Datasheet sections
- 1.1 Features
- 1.2 Mechanical Specifications
- 1.3 Absolute Maximum Ratings
- 1.4 DC Electrical Characteristics
- 1.5 Optical Characteristics
- 1.6 Backlight Characteristics
- 2.1 Counter Drawing
- 2.2 Interface Pin Description
- 2.3 Timing Characteristics
- 3.1 Quality Assurance Flow Chart
- 3.2 Inspection Specification
- 4.1 Reliability Test Condition
- 5.2 Handling
- 5.4 Terms of Warranty
CUSTOMER ： SAMPLE CODE ： (This Code will be changed while mass production) MASS PRODUCTION CODE ： PG640480FRT-ANN-I Customer Approved Date: Sales Sign QC Confirmed Checked By Designer Approval For Specifications Only. * This specification is subject to change without notice. Please contact Powertip or it’s representative before designing your product based on this specification. □ Approval For Specifications and Sample. Powertip Corporation Headquarters: No.8, 6th Road, Taichung Industrial Park, Taichung, Taiwan 台㆗市 407 工業區六路 8 號 □ LCD Division: TEL: 886-4-2355-6888 FAX: 886-4-2355-6898 E-mail: sales@display.powertip.com.tw Http://www.powertip.com.tw ▓ LCM Division: TEL: 886-4-2355-8168 FAX: 886-4-2355-8166 E-mail: sales@mail.powertip.com.tw Http://www.powertip.com.tw NO.PT-A-005-3
PG640480FRT-ANN-I Rev. 0 Page2 RECORDS OF REVISION Date Rev. Description Note Page 2003/04/21 0 Mass Production Total：18 Page
PG640480FRT-ANN-I Rev. 0 Page4 1. SPECIFICATIONS
1.1 Features
Display Type 640*480 Dots LCD Type FSTN, Negative, Transmissive Driver Condition LCD Module：1/240 Duty，1/13Bias Viewing Direction 6 O’clock Backlight CCFL B/L Weight 260g Interface Dual 4 bits parallel data input Other(controller/driver IC) －
1.2 Mechanical Specifications
Outline Dimension 197.0 (L) * 145.0 (w) * 11.0 (H)(Max) mm Viewing Area 153.0 (L) * 115.74 (w) mm Active Area 151.66 (L) * 113.74 (w) mm Dot Size 0.217 (L) * 0.217 (w) mm Dot Pitch 0.237 (L) * 0.237 (w) mm Note：For detailed information please refer to LCM drawing
1.3 Absolute Maximum Ratings
Item Symbol Condition Min. Max. Unit Power Supply Voltage V DD － 0 6.0 V LCD Driver Supply Voltage V DD-VEE － 0 45 V Input Voltage V IN － -0.3 V DD+0.3 V Operating Temperature T OP Excluded B/L -20 70 °C Storage Temperature. T ST Excluded B/L -30 80 °C Storage Humidity H D Ta＜40 ℃ 20 60 %RH
PG640480FRT-ANN-I Rev. 0 Page5
1.4 DC Electrical Characteristics
VDD = 5.0 V ± 10%，VSS = 0V，Ta = 25℃ Item Symbol Condition Min. Typ. Max. Unit Logic Supply voltage V DD - 3.0 5.0 5.5 V “H” input voltage V IH - 0.8 V DD - V DD V “L” input voltage V IL - 0 - 0.2 V DD V “H” output voltage V OH I OH=-0.4mA V DD-0.3 - 0.3 V “L” output voltage V OL I OL=+0.4mA 0 - 0.4 V Supply current I DD V DD=5V - 3 - mA VDD - VO (0°C) - 23.5 - VDD - VO (25°C) - 22.3 - LCM Driver Voltage V OP VDD - VO (50°C) - 20.5 - V
1.5 Optical Characteristics
LCD Panel：1/240 Duty，1/13 Bias，VLCD = 22.3V，Ta = 25℃ Item Symbol Conditions Min. Typ. Max. Reference View Angle θ C> 2.0,∅ = 0° -22 ° - 37° Notes 1 & 2 Contrast Ratio C θ= 5°, ∅ = 0° - 4 - Note 3 Response Time(rise) tr θ= 5°, ∅ = 0° - 150 ms - Note 4 Response Time(fall) tf θ= 5°, ∅ = 0° - 200 ms - Note 4 Luminance (LCM) L - 100 120 - Cd/m 2
PG640480FRT-ANN-I Rev. 0 Page6 Light (when reflected) z ( θ=0°) Note 1: Definition of angles θ and ∅ Note 2: Definition of viewing angles θ1 and θ2 θ1 θ2 viewing angle θ (∅ fixed) Note : Optimum viewing angle with the naked eye and viewing angle θ at Cmax. Above are not always the same Note 3: Definition of contrast C Note 4: Definition of response time Brightness (reflection) of unselected dot (B2) Brightness (reflection) of selected dot (B1) Contrast Non-selected state VLCD -VLCD tf 90% tr 10% Selected state Non-selected state Time
0 Note: Measured with a transmissive LCD
operating voltage (v) panel which is displayed 1 cm2 VLCD : Operating voltagefFRM : Frame frequency t r : Response time (rise) t f : Response time (fall) (%) Brightness (reflection) Brighness (reflection) of selected dot Brightness (reflection) of unselected dot Cmax. Contrast C 2.0 Sensor LCD panel X(∅ =90°) Light (when transmitted ) Y(∅ =0°) ( θ=90°) Y’(∅ =180°) θ
PG640480FRT-ANN-I Rev. 0 Page7
1.6 Backlight Characteristics
LCD Module with CCFL Backlight
Electrical Characteristics
Item Symbol Conditions Spec Unit Lamp current I L Ta=25℃ 5 ±1.0 mArms Lamp voltage V L Ta=25℃ 295 V rms Lamp Frequency F L Ta=25℃ 55 KHz Lamp Power P L Ta=25℃ 1.5 W rms Lamp Life Time Hr > 15,000 Hour Operating Temperature T OP 20~90%RH 0 60 ℃ Storage temperature T ST 5~90%RH -30 70 ℃ Optical Characteristics Item Symbol Condition Min. Typ. Max. Unit Average Brightness (With LCD) IV Note1 - 233 - cd/m 2 Brightness Uniformity - Note1 70% 85% 100% Color White N o t e 1：Inverter use TDK CXA-L10A ( Power Supply 5.0V ) at Ta=25 ℃
PG640480FRT-ANN-I Rev. 0 Page8 2. MODULE STRUCTURE
2.1 Counter Drawing
- See Appendix
2.2 Interface Pin Description
LCM Connector : MOLEX 53261-1590 Pin No. Symbol Level Function
1 FLM H The FLM signal indicating the beginning of each display cycle
2 LP H->L Display data latch pulse
3 CL2 H->L Display data shift clock
4 /DISP H/L ‘H’ : Display ON ; ’L’ : Display OFF
5 VDD Power supply for logic curcuit
6 VSS Ground
7 VEE Contrast adjustment voltage , VEE-VSS=22.5 V at 25°C 8~11 UD0~UD3 H/L Upper Screen Display data 12~15 LD0~LD3 H/L Lower Screen Display data Mating connector : MOLEX 51021-1500(HOUSING)*1 + MOLEX 50058-8000(TERMINAL)*15 CCFL Connector : MITSUMI : M63-M83-04 Interface Pin Signal Function
1 VCCFL Power supply for CCFL back light
2~3 NC No connection CCFL Back Light
4 VCCFL Power supply for CCFL back light
Mating connector : MITSUMI : M61M73-04/M60-04-30-114P(STRAIGHT)/ M60-04-30-134P(ANGLE)
PG640480FRT-ANN-I Rev. 0 Page9
2.3 Timing Characteristics
ITEM Symbol TEST CONDITIONS Min Max Units Clock Cycle tc - 125 - ns CL2 Pulse Width TcwH，tcwL - 50 - ns DATA Set-up Time t DSU - 50 - ns DATA Hold Time t DHD - 50 - ns CL2 Rise/Fall Time tr,tf - - (*5) ns LP Rise Time t LRP - 50 - ns LP Fall Time t LFP - 50 - ns LP Pulse Width t LW - 45 - ns CL2-to-LP Delay Time t SL - 40 - ns LP-to- CL2 Delay Time t LS - 40 - ns EIO-in Fall Time t EIFP - 40 - ns EIO-in Pulse Width t EIW - 40 - ns CL2-to-EIP Delay Time t SE - 20 - ns EIO-out Delay Time t EOD (*6) - 80 ns
PG640480FRT-ANN-I Rev. 0 Page10 POWER SUPPL Y Ω BLOCK DIAGRAM
PG640480FRT-ANN-I Rev. 0 Page11 DISPLAY PATTERN
PG640480FRT-ANN-I Rev. 0 Page12 3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
Item Customer Sales R&D Q.A Manufactu ring Product control Purchase Inventory control Marketing Design Sample Approval Pilot Run Mass Product Ship Out OK Request Info Survey Inquiry Project evaluation Project Validation Quote OK NG Contract Design check Sample test Verification Sample approval NG NG Pilot run & Reliabilit y test Verification Specification preparation OK Mass production Inspection NG OK Shipment NG Ship out OK
PG640480FRT-ANN-I Rev. 0 Page13 Item Customer Sales R&D Q.A Manufact uring Product control Purchase Inventory control Sales Service Q.A Activity 1. ISO 9001 Maintenance Activities 2. Process improvement proposal 3. Equipment calibration 4. Education And Training Activities 5. Standardization Management Info Claim Failure analysis Corrective action Tracking Analysis report
PG640480FRT-ANN-I Rev. 0 Page14
3.2 Inspection Specification
Inspection Standard：MIL-STD-105E Table Normal Inspection Single Sampling Level Ⅱ。 Equipment：Gauge、MIL-STD、Powertip Tester、Sample。 IQC Defect Level：Major Defect AQL 0.4; Minor Defect AQL 1.5。 FQC Defect Level：100% Inspection。 OUT Going Defect Level：Sampling。 Specification： NO Item Specification Judge Level
1 Part Number The part number is inconsistent with work order of
production N.G. Major
2 Quantity The quantity is inconsistent with work order of
production N.G. Major The display lacks of some patterns. N.G. Major Missing line. N.G. Major The size of missing dot, A is＞1/2 Dot size N.G. Major There is no function. N.G. Major Electronic characteristics of LCM A=( L + W ) ÷2 Output data is error N.G. Major Material is different with work order of production N.G. Major LCD is assembled in inverse direction N.G. Major Bezel is assembled in inverse direction N.G. Major Shadow is within LCD viewing area + 0.5 mm N.G. Major The diameter of dirty particle, A is＞0.4 mm N.G. Minor Dirty particle length is ＞3.0mm, and 0.01mm＜ width ≦0.05mm N.G. Minor Display is without protective film N.G. Minor Conductive rubber is over bezel 1mm N.G. Minor Polarizer exceeds over viewing area of LCD N.G. Minor Area of bubble in polarizer, A＞1.0mm, the number of bubble is ＞1 piece. N.G. Minor Appearance of LCD A=( L + W ) ÷2 Dirty particle (Including scratch、bubble ) 0.4mm＜Area of bubble in polarizer, A＜1.0mm, the number of bubble is ＞4 pieces. N.G. Minor Burned area or wrong part number is on PCB N.G. Major The symbol, character, and mark of PCB are unidentifiable. N.G Minor The stripped solder mask , A is＞1.0mm N.G. Minor 0.3mm＜stripped solder mask or visible circuit, A ＜ 1.0mm, and the number is ≧4 pieces N.G. Minor There is particle between the circuits in solder mask N.G Minor The circuit is peeled off or cracked N.G Minor There is any circuits risen or exposed. N.G Minor 0.2mm＜Area of solder ball, A is ≦0.4mm The number of solder ball is ≧3 pieces N.G Minor Appearance of PCB A=( L + W ) ÷2 The magnitude of solder ball, A is ＞0.4mm. N.G Minor
PG640480FRT-ANN-I Rev. 0 Page15 NO Item Specification Judge Level The shape of modeling is deformed by touching. N.G. Major Insufficient epoxy: Circuit or pad of IC is visible N.G. Minor Excessive epoxy: Diameter of modeling is ＞20mm or height is ＞2.5mm N.G. Minor 6 Appearance of molding A=( L + W ) ÷2 The diameter of pinhole in modeling, A is ＞0.2mm. N.G. Minor The folding angle of frame must be ＞45∘+10∘ N.G. Minor The area of stripped electroplate in top-view of frame, A is ＞1.0mm. N.G. Minor Rust or crack is (Top view only) N.G. Minor 7 Appearance of frame A=( L + W ) ÷2 The scratched width of frame is ＞0.06mm. (Top view only) N.G. Minor The color of backlight is nonconforming N.G. Major Backlight can’t work normally. N.G. Major The LED lamp can’t work normally N.G. Major The unsoldering area of pin for backlight, A is ＞1/2 solder joint area. N.G. Minor Electrical characteristic of backlight A=( L + W ) ÷2 The height of solder pin for backlight is ＞2.0mm N.G. Minor The mark or polarity of component is unidentifiable. N.G. Minor The height between bottom of component and surface of the PCB is floating ＞0.7mm N.G. Minor D＞1/4W W D D ’ P a d N.G. Minor End solder joint width, D’ is ＞50% width of component termination or width of pad N.G. Minor Side overhang, D is ＞25% width of component termination. N.G. Minor Component is cracked, deformed, and burned, etc. N.G. Minor The polarity of component is placed in inverse direction. N.G. Minor
10 Assembly parts
A=( L + W ) ÷2 Maximum fillet height of solder extends onto the component body or minimum fillet height is ＜0.5mm. N.G. Minor
PG640480FRT-ANN-I Rev. 0 Page16 4. RELIABILITY TEST
4.1 Reliability Test Condition
1 High Temperature
Storage at 80 ±2℃ 96~100 hrs Surrounding temperature, then storage at normal condition 4hrs
2 Low Temperature
Storage at -30 ±2℃ 96~100 hrs Surrounding temperature, then storage at normal condition 4hrs
3 High Temperature
/Humidity Storage 1.Storage 96~100 hrs 60 ±2℃, 90~95%RH surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer). or 2.Storage 96~100 hrs 40 ±2℃, 90~95%RH surrounding temperature, then storage at normal condition 4 hrs.
4 Temperature Cycling
(30mins) (5mins) (30mins) (5mins)
10 Cycle
5 Vibration 10~55Hz ( 1 minute ) 1.5mm X,Y and Z direction ﹡(each 2hrs) Air Discharge: Apply 6 KV with 5 times discharge for each polarity +/- Contact Discharge: Apply 250V with 5 times discharge for each polarity +/-
6 ESD Test
Testing location: Around the face of LCD Testing location: 1.Apply to bezel. 2.Apply to Vdd, Vss. Packing Weight (Kg) Drop Height (cm) 0 ~ 45.4 122 45.4 ~ 90.8 76 90.8 ~ 454 61
7 Drop Test
PG640480FRT-ANN-I Rev. 0 Page17 5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
5.1.2 If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1 Avoid any strong mechanical shock which can break the glass.
5.2.2 Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using. 5.2.3 Do not remove the panel or frame from the module. 5.2.4 The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.)
5.2.5 Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
surface of plate. 5.2.6 Do not touch the display area with bare hands , this will stain the display area. 5.2.7 Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent.
5.3 STORAGE
5.3.1 Store the panel or module in a dark place where the temperature is 25 ℃ ±5℃
and the humidity is below 65% RH. 5.3.2 Do not place the module near organics solvents or corrosive gases. 5.3.3 Do not crush , shake , or jolt the module.
5.4 TERMS OF WARRANTY
5.4.1 Applicable warrant period
The period is within thirteen months since the date of shipping out under normal using and storage conditions.
5.4.2 Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronicequipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required.
PG640480FRT-ANN-I Rev. 0 Page18 × ×