PG2289.101HLT PULSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Current Rating: 16A Inductance: 100nH Height: 4.5mm Max Footprint: 4.7mm x 4.5mm Max NOTES: Mechanical Schematic PG2289.XXXHLT 1. Inductance measured at 100kHz, 100mVrms. 2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current. 3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat- ing current depending on which value is lower. 4. The nominal DCR is measured at point 2. , as shown below on the mechanical drawing. 5. The saturation current is the typical current which causes the inductance to drop by 20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 6. The heating current is the DC current which causes the part temperature to increase by approximately 40°C when used in a typical application. 7. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. To determine the approximate total losses (or temperature rise) for a given application, the core loss and temperature rise curves can be used. 8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to industry standard tape and reel specification EIA-481. The tape and reel for this product has a width (W=16mm), pitch (P1=8mm) and depth (Ko=4.8mm). Samples of these parts can be ordered by removing the HLT suffix and replacing with HL. 9. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 10. Sample Value only. Guaranteed by Design and not tested in production Weight: 0.26grms Tape &Reel: 1500/ Reel Dimensions: mm Unless otherwise specified , all tolerances are ± 0.25 Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C 7 Part Number Inductance1 @ 0ADC (nH +/- 20%) Inductance2 @Irated (nH TYP) Irated3 (ADC) DCR (1-3) (mΩ Norminal) Saturation Current5 (A TYP) Heating Current6 (A TYP)25°C 100°C PG2289.101HLT 100 80 16 0.105+/-15% 16 13 35 SMT Power Inductors Power Beads - PG2289.XXXHLT Series P916.A (08/21) PulseElectronics.com
SURFACE MOUNTING TYPE, REEL/TAPE LIST TYPE REEL SIZE (mm) QTY W P1 PCS/REEL PG2289.XXXHLT 16 8 1500 TAPE & REEL INFO PIN 1 INDICATOR SIDE CIRCULAR HOLES W SMT Power Inductors Power Beads - PG2289.XXXHLT Series P916.A (08/21) PulseElectronics.com
PG2289.101HLT, L vs I Curve 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 0 3 6 9 12 15 18 21 24 Inductance (nH) Current I (A) PG2289.101HLT L vs I curve At 25℃ At 100℃ PG2289.101HLT, Core Loss 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0 200 400 600 800 1000 1200 1400 1600 1800 2000 CoreLoss (W) ΔB where ΔB = 1.79* L(nH) * ΔI PG2289.XXXHL CoreLoss (W) 200 KHz 200 KHz 800 KHz 500 KHz 600 KHz 700 KHz 400 KHz 300 KHz P916.A (08/21) SMT Power Inductors Power Beads - PG2292.XXXHLT Series For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2021. Pulse Electronics, Inc. All rights reserved. PulseElectronics.com