DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Shielded Power Inductors – PFL2015 Document 876-1 Document 876-1 Revised 09/13/15

  • Low cost, low profile 0805 size power inductor
  • Can handle current of much larger inductors; up to 1900 mA Inductance2 DCR (mOhms)3 SRF typ4 Isat (mA)5 I rms (mA)6 Part number1 ±20% (µH) typ max (MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise PFL2015-561ME_ 0.56 60 70 600 1300 1600 1900 1300 1800 PFL2015-681ME_ 0.68 62 75 460 1200 1600 1800 1100 1500 PFL2015-102ME_ 1.0 110 130 450 900 1200 1400 940 1200 PFL2015-222ME_ 2.2 175 210 100 640 840 1050 770 1000 PFL2015-332ME_ 3.3 255 280 60 480 650 720 700 900 PFL2015-472ME_ 4.7 275 340 50 450 620 700 600 770 PFL2015-682ME_ 6.8 340 400 40 380 520 600 520 680 Core material Composite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver- platinum-glass frit. Other terminations available at additional cost. Weight 14.1 mg Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.63 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 1. When ordering, please specify termination and packaging codes: PFL2015-682MEC Termination: E = RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-A test fixture with an Agilent/HP 4286 impedance analyzer and Coilcraft-provided cor- relation pieces. 3. DCR measured using a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

L vs Current L vs Frequency Dimensions are in inches mm 0.1 Inductance (µH) 0.1 1 10010 Frequency (MHz) 6.8 µH 4.7 µH 2.2 µH 3.3 µH 1.0 µH 0.56 µH 0.68 µH 0.1 Inductance (µH) 0.01 0.1 101 Current (A) 6.8 µH 4.7 µH 3.3 µH 2.2 µH 1.0 µH 0.56 µH 0.68 µH Terminal wraparound: approx 0.010/0,254 both ends Recommended Land Pattern 0.087 2,20 0.015 0,38 0.059 1,50 max max 0.057 1,45 0.040 1,02 max 0.012 0,305 0.012 0,305 0.056 1,42 0.050 1,27 0.070 1,78 0.070 1.78 Document 876-2 Revised 09/13/15