PFKC05-12S33 P-DUKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Page 1 of 3 Issued Date：2008/05/21 INPUT SPECIFICATIONS Input voltage range 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Pi type Input surge voltage 100mS max 12V input 24V input 48V input 36VDC 50VDC 100VDC Input reflected ripple current Nominal Vin and full load 150mAp-p Start up time Nominal Vin and constant resistive load Power up 30mS, typ. ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -25ºC ~ +71ºC(non derating) Storage temperature range -55ºC ~ +105ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 Class A ESD EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 6) EN61000-4-4 ± 2K V Perf. Criteria B Surge (Note 6) EN61000-4-5 ± 1K V Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A OUTPUT SPECIFICATIONS Output power 5 Watts, max. Voltage accuracy Full load and nominal Vin ± 1% Minimum load (Note 7) See table Line regulation LL to HL at Full Load ± 0.2% Load regulation Min. Load to Full Load Single Dual ± 0.5% ± 2% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ±0.02% / ºC, max. Transient response recovery time 25% load step change 500μS Over load protection % of FL at nominal input 180%, typ. Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output Standard Suffix “ H ” 1600VDC, min. 3000VDC, min. Isolation resistance 109ohms, min. Isolation capacitance 300pF, max. Switching frequency 100KHz, min. Approvals and standard IEC60950-1, UL60950-1, EN60950-1 Case material Non-conductive black plastic Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) Dimensions 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) Weight DIP SMD 14g (0.48oz) 15g (0.52oz) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 3.731 x 10 hrs 2.591 x 10 hrs TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted
FEATURES
- 5 WATTS REGULATED OUTPUT POWER
- OUTPUT CURRENT UP TO 1000mA
- STANDARD 1.25 X 0.80 X 0.40 INCH
- HIGH EFFICIENCY UP TO 81%
- 2:1 WIDE INPUT VOLTAGE RANGE
- SWITCHING FREQUENCY (100KHz, MIN)
- OVER CURRENT PROTECTION
- STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
- CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
- UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
- ISO9001 CERTIFIED MANUFACTURING FACILITIES
- COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS SMD TYPE
DESCRIPTION
The PFKC05 series offer 5 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible with PFKC03, FKC03, FKC05 series. PFKC05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC.
APPLICATIONS
Page 2 of 3 Issued Date：2008/05/21 Output Current Input Current Model Number Input Range Output Voltage Min. load Full load Output(4) Ripple & Noise No load(3) Full load(2) Eff (4) (%) Capacitor(5) Load max PFKC05-12S33 9 – 18 VDC 3.3 VDC 100mA 1000mA 75mVp-p 25mA 404mA 72 2200μF PFKC05-12S05 9 – 18 VDC 5 VDC 100mA 1000mA 75mVp-p 10mA 579mA 76 1000 μF PFKC05-12S12 9 – 18 VDC 12 VDC 47mA 470mA 120mVp-p 30mA 618mA 80 220μF PFKC05-12S15 9 – 18 VDC 15 VDC 40mA 400mA 150mVp-p 20mA 658mA 80 150 μF PFKC05-12D05 9 – 18 VDC ± 5 VDC ±50mA ± 500mA 75mVp-p 20mA 571mA 77 ± 680μF PFKC05-12D12 9 – 18 VDC ± 12 VDC ±20mA ± 230mA 120mVp-p 50mA 605mA 80 ± 100 μF PFKC05-12D15 9 – 18 VDC ± 15 VDC ±19mA ± 190mA 150mVp-p 30mA 625mA 80 ± 68μF PFKC05-24S33 18 – 36 VDC 3.3 VDC 100mA 1000mA 75mVp-p 15mA 202mA 72 2200 μF PFKC05-24S05 18 – 36 VDC 5 VDC 100mA 1000mA 75mVp-p 10mA 278mA 79 1000μF PFKC05-24S12 18 – 36 VDC 12 VDC 47mA 470mA 120mVp-p 10mA 306mA 81 220 μF PFKC05-24S15 18 – 36 VDC 15 VDC 40mA 400mA 150mVp-p 10mA 325mA 81 150μF PFKC05-24D05 18 – 36 VDC ± 5 VDC ±50mA ± 500mA 75mVp-p 10mA 282mA 78 ± 680 μF PFKC05-24D12 18 – 36 VDC ± 12 VDC ±23mA ± 230mA 120mVp-p 40mA 299mA 81 ± 100μF PFKC05-24D15 18 – 36 VDC ± 15 VDC ±19mA ± 190mA 150mVp-p 10mA 309mA 81 ± 68 μF PFKC05-48S33 36 – 75 VDC 3.3 VDC 100mA 1000mA 75mVp-p 5mA 100mA 73 2200μF PFKC05-48S05 36 – 75 VDC 5 VDC 100mA 1000mA 75mVp-p 5mA 141mA 78 1000 μF PFKC05-48S12 36 – 75 VDC 12 VDC 47mA 470mA 120mVp-p 5mA 153mA 81 220μF PFKC05-48S15 36 – 75 VDC 15 VDC 40mA 400mA 150mVp-p 5mA 162mA 81 150 μF PFKC05-48D05 36 – 75 VDC ± 5 VDC ±50mA ± 500mA 75mVp-p 10mA 143mA 77 ± 680μF PFKC05-48D12 36 – 75 VDC ± 12 VDC ±23mA ± 230mA 120mVp-p 10mA 149mA 81 ± 100 μF PFKC05-48D15 36 – 75 VDC ± 15 VDC ±19mA ± 190mA 150mVp-p 10mA 154mA 81 ± 68μF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. 7. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. PFKC05-48S05 Derating Curve 100 120 - 2 5- 5 1 53 55 57 59 5 1 1 5 AMBIENT TEMPERATURE( ℃) OUTPUT POWER (%) 71 PFKC05-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) EFFICIENCY(%)
Page 3 of 3 Issued Date：2008/05/21 DIP PIN CONNECTION PIN SINGLE DUAL 2 - INPUT - INPUT 3 - INPUT - INPUT
9 NC COMMON
10 NC NC 15 NC NC
11 NC - OUTPUT 14 + OUTPUT + OUTPUT
- All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) Suffix-SMD