PFKC05_14 P-DUKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Page 1 of 3 www.pduke.com 2014/4/30 PFKC05 SERIES
5 WATTS DC-DC CONVERTER
Output power 5 Watts, max. Voltage accuracy ± 1% Minimum load (Note 7) See table Line regulation LL to HL at Full Load ± 0.2% Load regulation Min. Load to Full Load Single Dual ± 0.5% ± 2% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ± 0.02% / ºC, max. Transient response recovery time 25% load step change 500 µs Over load protection % of FL at nominal input 180% Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output Standard Suffix “ H ” 1600VDC, min. 1minute 3000VDC, min. 1minute Isolation resistance 500VDC 10 9ohms, min. Isolation capacitance 300pF, max. Switching frequency 100kHz, min. Safety approvals IEC60950-1, UL60950-1, & EN60950-1 Case material Non-conductive black plastic Base material Non-conductive black plastic Potting material Epoxy (UL94 V-0) Dimensions 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) Weight DIP SMD 14g (0.48oz) 15g (0.52oz) MTBF (Note 1) MIL-HDBK-217F 5.953 x 10 6 hrs INPUT SPECIFICATIONS Input voltage range 12VDC nominal input 24VDC nominal input 48VDC nominal input 9 ~ 18VDC 18 ~ 36VDC 36 ~75VDC Input filter Pi type Input surge voltage 12VDC input 24VDC input 48VDC input 36VDC 100ms , max. 50VDC 100ms , max. 100VDC 100ms, max . Input reflected ripple current 150mAp-p Start up time Nominal input and constant resistive load Power up 30ms ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -25ºC ~ +71ºC(non der ating) Storage temperature range -55ºC ~ +125 ºC Thermal shock MIL-STD-810 F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 Class A ESD EN61000-4-2 Air Contact ± 8kV ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 6) EN61000-4-4 ± 2kV Perf. Criteria B Surge (Note 6) EN61000-4-5 ± 1kV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
FEATURES
- 5 WATTS REGULATED OUTPUT POWER
- OUTPUT CURRENT UP TO 1000mA
- STANDARD 1.25 X 0.80 X 0.40 INCH
- HIGH EFFICIENCY UP TO 81%
- 2:1 WIDE INPUT VOLTAGE RANGE
- SWITCHING FREQUENCY (100kHz, MIN)
- OVER CURRENT PROTECTION
- STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
- UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
- CE MARKED
- COMPLIANT TO RoHS II & REACH OPTIONS SMD TYPE
DESCRIPTION
The PFKC05 series offer 5 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible with PFKC03, FKC03, FKC05 series. PFKC05 series have 2:1 wide input voltage of 9 ~18, 18 ~36 and 36 ~75VDC.
APPLICATIONS
Page 2 of 3 www.pduke.com 2014/4/30 PFKC05 SERIES PFKC05-48S05 Derating Curve PFKC05-48S05 Efficiency VS Input V oltage PFKC05-48S05 Efficiency VS Output Current Output Current Model Number Input Range Output Voltage Min. load Full load Output (2) Ripple & Noise No load (3) Input Current Eff (4) (%) Capacitor (5) Load max PFKC05-12S33 9 ~18 VDC 3.3 VDC 100mA 1000mA 75mVp-p 25mA 72 2200 µF PFKC05-12S05 9 ~18 VDC 5 VDC 100mA 1000mA 75mVp-p 10mA 76 1000 µF PFKC05-12S12 9 ~18 VDC 12 VDC 47mA 470mA 120mVp-p 30mA 80 220µF PFKC05-12S15 9 ~18 VDC 15 VDC 40mA 400mA 150mVp-p 20mA 80 150 µF PFKC05-12D05 9 ~18 VDC ± 5 VDC ±50mA ± 500mA 75mVp-p 20mA 77 ± 680µF PFKC05-12D12 9 ~18 VDC ± 12 VDC ±20mA ± 230mA 120mVp-p 50mA 80 ± 100 µF PFKC05-12D15 9 ~18 VDC ± 15 VDC ±19mA ± 190mA 150mVp-p 30mA 80 ± 68 µF PFKC05-24S33 18 ~ 36 VDC 3.3 VDC 100mA 1000mA 75mVp-p 15mA 72 22 00 µF PFKC05-24S05 18 ~ 36 VDC 5 VDC 100mA 1000mA 75mVp-p 10mA 79 1000 µF PFKC05-24S12 18 ~36 VDC 12 VDC 47mA 470mA 120mVp-p 10mA 81 220 µF PFKC05-24S15 18 ~ 36 VDC 15 VDC 40mA 400mA 150mVp-p 10mA 81 150µF PFKC05-24D05 18 ~ 36 VDC ± 5 VDC ±50mA ± 500mA 75mVp-p 10mA 78 ± 680µF PFKC05-24D12 18 ~ 36 VDC ± 12 VDC ±23mA ± 230mA 120mVp-p 40mA 81 ± 100 µF PFKC05-24D15 18 ~ 36 VDC ± 15 VDC ±19mA ± 190mA 150mVp-p 10mA 81 ± 68 µF PFKC05-48S33 36 ~ 75 VDC 3.3 VDC 100mA 1000mA 75mVp-p 5mA 73 2200 µF PFKC05-48S05 36 ~ 75 VDC 5 VDC 100mA 1000mA 75mVp-p 5mA 78 1000 µF PFKC05-48S12 36 ~ 75 VDC 12 VDC 47mA 470mA 120mVp-p 5mA 81 220µF PFKC05-48S15 36 ~ 75 VDC 15 VDC 40mA 400mA 150mVp-p 5mA 81 150 µF PFKC05-48D05 36 ~ 75 VDC ± 5 VDC ±50mA ± 500mA 75mVp-p 10mA 77 ± 680µF PFKC05-48D12 36 ~ 75 VDC ± 12 VDC ±23mA ± 230mA 120mVp-p 10mA 81 ± 100 µF PFKC05-48D15 36 ~75 VDC ± 15 VDC ±19mA ± 190mA 150mVp-p 10mA 81 ± 68 µF Note 1. MIL-HDBK-217F @Ta=25 ºC, Full load. 2. Typical value at nominal input and full load. (2 0MHz BW.) 3. Typical value at nominal input and no load. 4. Typical value at nominal input and full load. 5. Test by minimum input and constant resistive loa d. 6. An external input filter capacitor is required i f the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V. 7. The output requires a minimum loading on the out put to maintain specified regulation. Operation under no- load condition will not damage these devices, however they may not meet all listed specification. CAUTION: This power module is not internally fused. An input line fuse must always be used.
Page 3 of 3 www.pduke.com 2014/4/30 PFKC05 SERIES MECHANICAL DRAWING ：： ：： DIP TYPE SMD TYPE DIP PIN CONNECTION PIN SINGLE DUAL PIN SINGLE DUAL 2 -INPUT -INPUT 23 +INPUT +INPUT 3 -INPUT -INPUT 22 +INPUT +INPUT
9 NC COMMON 16 -OUTPUT COMMON
10 NC NC 15 NC NC
11 NC -OUTPUT 14 +OUTPUT +OUTPUT
PIN SINGLE DUAL PIN SINGLE DUAL 2 -INPUT -INPUT 23 +INPUT +INPUT 3 -INPUT -INPUT 22 +INPUT +INPUT
10 NC NC 15 NC NCZ
- All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1)