DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 www.pduke.com 2013/5/3 PFKC05 SERIES

5 WATTS DC-DC CONVERTER

Output power 5 Watts, max. Voltage accuracy ± 1% Minimum load (Note 7) See table Line regulation LL to HL at Full Load ± 0.2% Load regulation Min. Load to Full Load Single Dual ± 0.5% ± 2% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ± 0.02% / ºC, max. Transient response recovery time 25% load step change 500µs Over load protection % of FL at nominal input 180% Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output Standard Suffix “ H ” 1600VDC, min. 1minute 3000VDC, min. 1minute Isolation resistance 500VDC 109ohms, min. Isolation capacitance 300pF, max. Switching frequency 100kHz, min. Design meet safety standard IEC60950-1, UL60950-1, EN60950-1 Case material Non-conductive black plastic Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) Dimensions 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) Weight DIP SMD 14g (0.48oz) 15g (0.52oz) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 3.731 x 106 hrs 2.591 x 106 hrs INPUT SPECIFICATIONS Input voltage range 12VDC nominal input 24VDC nominal input 48VDC nominal input 9 ~ 18VDC 18 ~ 36VDC 36 ~75VDC Input filter Pi type Input surge voltage 12VDC input 24VDC input 48VDC input 36VDC 100ms , max. 50VDC 100ms , max. 100VDC 100ms, max . Input reflected ripple current 150mAp-p Start up time Nominal input and constant resistive load Power up 30ms ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -25ºC ~ +71ºC(non derating) Storage temperature range -55ºC ~ +125ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 Class A ESD EN61000-4-2 Air Contact ± 8kV ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 6) EN61000-4-4 ± 2kV Perf. Criteria B Surge (Note 6) EN61000-4-5 ± 1kV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

  • 5 WATTS REGULATED OUTPUT POWER
  • OUTPUT CURRENT UP TO 1000mA
  • STANDARD 1.25 X 0.80 X 0.40 INCH
  • HIGH EFFICIENCY UP TO 81%
  • 2:1 WIDE INPUT VOLTAGE RANGE
  • SWITCHING FREQUENCY (100kHz, MIN)
  • OVER CURRENT PROTECTION
  • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
  • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC
  • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1
  • ISO9001 CERTIFIED MANUFACTURING FACILITIES
  • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU OPTIONS SMD TYPE

DESCRIPTION

The PFKC05 series offer 5 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible with PFKC03, FKC03, FKC05 series. PFKC05 series have 2:1 wide input voltage of 9 ~18, 18 ~36 and 36 ~75VDC.

APPLICATIONS

Page 2 of 3 www.pduke.com 2013/5/3 PFKC05 SERIES PFKC05-48S05 Derating Curve PFKC05-48S05 Efficiency VS Input V oltage PFKC05-48S05 Efficiency VS Output Current Output Current Model Number Input Range Output Voltage Min. load Full load Output(2) Ripple & Noise No load(3) Input Current Eff (4) (%) Capacitor(5) Load max PFKC05-12S33 9 ~18 VDC 3.3 VDC 100mA 1000mA 75mVp-p 25mA 72 2200µF PFKC05-12S05 9 ~18 VDC 5 VDC 100mA 1000mA 75mVp-p 10mA 76 1000 µF PFKC05-12S12 9 ~18 VDC 12 VDC 47mA 470mA 120mVp-p 30mA 80 220µF PFKC05-12S15 9 ~18 VDC 15 VDC 40mA 400mA 150mVp-p 20mA 80 150 µF PFKC05-12D05 9 ~18 VDC ± 5 VDC ±50mA ± 500mA 75mVp-p 20mA 77 ± 680µF PFKC05-12D12 9 ~18 VDC ± 12 VDC ±20mA ± 230mA 120mVp-p 50mA 80 ± 100 µF PFKC05-12D15 9 ~18 VDC ± 15 VDC ±19mA ± 190mA 150mVp-p 30mA 80 ± 68µF PFKC05-24S33 18 ~ 36 VDC 3.3 VDC 100mA 1000mA 75mVp-p 15mA 72 2200 µF PFKC05-24S05 18 ~ 36 VDC 5 VDC 100mA 1000mA 75mVp-p 10mA 79 1000µF PFKC05-24S12 18 ~36 VDC 12 VDC 47mA 470mA 120mVp-p 10mA 81 220 µF PFKC05-24S15 18 ~ 36 VDC 15 VDC 40mA 400mA 150mVp-p 10mA 81 150µF PFKC05-24D05 18 ~ 36 VDC ± 5 VDC ±50mA ± 500mA 75mVp-p 10mA 78 ± 680 µF PFKC05-24D12 18 ~ 36 VDC ± 12 VDC ±23mA ± 230mA 120mVp-p 40mA 81 ± 100µF PFKC05-24D15 18 ~ 36 VDC ± 15 VDC ±19mA ± 190mA 150mVp-p 10mA 81 ± 68 µF PFKC05-48S33 36 ~ 75 VDC 3.3 VDC 100mA 1000mA 75mVp-p 5mA 73 2200µF PFKC05-48S05 36 ~ 75 VDC 5 VDC 100mA 1000mA 75mVp-p 5mA 78 1000 µF PFKC05-48S12 36 ~ 75 VDC 12 VDC 47mA 470mA 120mVp-p 5mA 81 220µF PFKC05-48S15 36 ~ 75 VDC 15 VDC 40mA 400mA 150mVp-p 5mA 81 150 µF PFKC05-48D05 36 ~ 75 VDC ± 5 VDC ±50mA ± 500mA 75mVp-p 10mA 77 ± 680µF PFKC05-48D12 36 ~ 75 VDC ± 12 VDC ±23mA ± 230mA 120mVp-p 10mA 81 ± 100 µF PFKC05-48D15 36 ~75 VDC ± 15 VDC ±19mA ± 190mA 150mVp-p 10mA 81 ± 68µF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Typical value at nominal input and full load. (20MHz BW.) 3. Typical value at nominal input and no load. 4. Typical value at nominal input and full load. 5. Test by minimum input and constant resistive load. 6. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. 7. The output requires a minimum loading on the output to maintain specified regulation. Operation under no- load condition will not damage these devices, however they may not meet all listed specification. CAUTION: This power module is not internally fused. An input line fuse must always be used.

Page 3 of 3 www.pduke.com 2013/5/3 PFKC05 SERIES MECHANICAL DRAWING：： ：： DIP TYPE SMD TYPE DIP PIN CONNECTION PIN SINGLE DUAL PIN SINGLE DUAL 2 -INPUT -INPUT 23 +INPUT +INPUT 3 -INPUT -INPUT 22 +INPUT +INPUT

9 NC COMMON 16 -OUTPUT COMMON

10 NC NC 15 NC NC

11 NC -OUTPUT 14 +OUTPUT +OUTPUT

PIN SINGLE DUAL PIN SINGLE DUAL 2 -INPUT -INPUT 23 +INPUT +INPUT 3 -INPUT -INPUT 22 +INPUT +INPUT

10 NC NC 15 NC NCZ

  1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1)