PFKC03-48S12

PFKC03-05S33 P-DUKE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Page 1 of 3 Issued Date：2008/05/21 OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy Full load and nominal Vin ±1% Minimum load (Note 7) See table Line regulation LL to HL at Full Load ± 0.2% Load regulation Single 3.3Vout Min. Load to Full Load Others D u a l ± 0.3% ± 0.2% ± 2% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ±0.02% / ºC, max. Transient response recovery time 25% load step change 500μS Over load protection % of FL at nominal input 180%, typ. Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output Standard Suffix “ H ” 1600VDC, min. 3000VDC, min. Isolation resistance 109ohms, min. Isolation capacitance 300pF, max. Switching frequency 100KHz, min. Approvals and standard IEC60950-1, UL60950-1, EN60950-1 Case material Non-conductive black plastic Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) Dimensions 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) Weight DIP SMD 14g (0.48oz) 15g (0.52oz) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 3.690 x 10 hrs 3.082 x 10 hrs INPUT SPECIFICATIONS Input voltage range 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5 – 6VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Pi type Input surge voltage 100mS max 5V input 12V input 24V input 48V input 15VDC 36VDC 50VDC 100VDC Input reflected ripple current Nominal Vin and full load 120mAp-p Start up time Nominal Vin and constant resistive load Power up 30mS, typ. ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -25ºC ~ +71ºC(non derating) Storage temperature range -55ºC ~ +105ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 Class A ESD EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 6) EN61000-4-4 ± 2KV Perf. Criteria B Surge (Note 6) EN61000-4-5 ± 1KV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

• 3 WATTS REGULATED OUTPUT POWER
• OUTPUT CURRENT UP TO 600mA
• STANDARD 1.25 X 0.80 X 0.40 INCH
• HIGH EFFICIENCY UP TO 80%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SWITCHING FREQUENCY (100KHz, MIN)
• OVER CURRENT PROTECTION
• STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS SMD TYPE

DESCRIPTION

The PFKC03 series offer 3 watts of output power from a package in an IC compatible 24 pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible to PFKC05, FKC03, FKC05 series. PFKC03 series have 2:1 wide input voltage of 4.5-6, 9-18, 18-36 and 36-75VDC.

APPLICATIONS

Page 2 of 3 Issued Date：2008/05/21 Output Current Input Current Model Number Input Range Output Voltage Min. load Full load Output(4) Ripple & Noise No load(3) Full load(2) Eff(4) (%) Capacitor(5) Load max PFKC03-05S33 4.5 – 6 VDC 3.3 VDC 60mA 600mA 75mVp-p 20mA 649mA 66 2200μF PFKC03-05S05 4.5 – 6 VDC 5 VDC 60mA 600mA 75mVp-p 20mA 909mA 70 1000 μF PFKC03-05S12 4.5 – 6 VDC 12 VDC 25mA 250mA 120mVp-p 35mA 835mA 76 170μF PFKC03-05S15 4.5 – 6 VDC 15 VDC 20mA 200mA 150mVp-p 35mA 845mA 75 110 μF PFKC03-05D05 4.5 – 6 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 20mA 857mA 74 ± 500μF PFKC03-05D12 4.5 – 6 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 25mA 845mA 75 ± 96 μF PFKC03-05D15 4.5 – 6 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 55mA 870mA 73 ± 47μF PFKC03-12S33 9 – 18 VDC 3.3 VDC 60mA 600mA 75mVp-p 10mA 266mA 70 2200 μF PFKC03-12S05 9 – 18 VDC 5 VDC 60mA 600mA 75mVp-p 10mA 353mA 75 1000μF PFKC03-12S12 9 – 18 VDC 12 VDC 25mA 250mA 120mVp-p 15mA 333mA 79 170 μF PFKC03-12S15 9 – 18 VDC 15 VDC 20mA 200mA 150mVp-p 15mA 343mA 77 110μF PFKC03-12D05 9 – 18 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 15mA 348mA 76 ± 500 μF PFKC03-12D12 9 – 18 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 20mA 338mA 78 ± 96μF PFKC03-12D15 9 – 18 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 25mA 333mA 79 ± 47 μF PFKC03-24S33 18 – 36 VDC 3.3 VDC 60mA 600mA 75mVp-p 10mA 123mA 71 2200μF PFKC03-24S05 18 – 36 VDC 5 VDC 60mA 600mA 75mVp-p 10mA 174mA 76 1000 μF PFKC03-24S12 18 – 36 VDC 12 VDC 25mA 250mA 120mVp-p 10mA 164mA 80 170μF PFKC03-24S15 18 – 36 VDC 15 VDC 20mA 200mA 150mVp-p 10mA 164mA 80 110 μF PFKC03-24D05 18 – 36 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 10mA 172mA 77 ± 500μF PFKC03-24D12 18 – 36 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 10mA 167mA 79 ± 96 μF PFKC03-24D15 18 – 36 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 10mA 167mA 79 ± 47μF PFKC03-48S33 36 – 75 VDC 3.3 VDC 60mA 600mA 75mVp-p 5mA 61mA 72 2200 μF PFKC03-48S05 36 – 75 VDC 5 VDC 60mA 600mA 75mVp-p 5mA 88mA 75 1000μF PFKC03-48S12 36 – 75 VDC 12 VDC 25mA 250mA 120mVp-p 5mA 84mA 79 170 μF PFKC03-48S15 36 – 75 VDC 15 VDC 20mA 200mA 150mVp-p 5mA 84mA 79 110μF PFKC03-48D05 36 – 75 VDC ± 5 VDC ±30mA ± 300mA 75mVp-p 5mA 86mA 77 ± 500 μF PFKC03-48D12 36 – 75 VDC ± 12 VDC ±12mA ± 125mA 120mVp-p 5mA 84mA 79 ± 96μF PFKC03-48D15 36 – 75 VDC ± 15 VDC ±10mA ± 100mA 150mVp-p 5mA 84mA 79 ± 47 μF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. 7. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. PFKC03-48S05 Derating Curve 100 120 - 2 5- 51 53 55 57 59 5 1 1 5 AMBIENT TEMPERATURE( ℃) OUTPUT POWER (%) 71

Page 3 of 3 Issued Date：2008/05/21 SMD PIN CONNECTION PIN SINGLE DUAL 2 -I N P U T - INPUT 3 - INPUT - INPUT

9 NC COMMON

10 NC NC 15 NC NC

11 NC -O U T P U T 14 + OUTPUT + OUTPUT

11 NC - OUTPUT 14 + OUTPUT + OUTPUT

10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) EFFICIENCY(%) 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) Suffix-SMD