DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Specifications subject to change without notice. Please check our website for latest information. Document 1005W-1 Revised 09/08/15 Document 1005W-1 Dimensions are in inches mm Wideband Transformers – PFD2015 Insertion DCR Bandwidth loss max L min2 max2 Part number1 (MHz) (dB) (µH) (Ohms) PFD2015-102ME_ 4.6 – 750 0.5 0.80 0.165 PFD2015-122ME_ 4.0 – 730 0.4 0.96 0.175 PFD2015-182ME_ 2.2 – 490 0.4 1.44 0.294 PFD2015-272ME_ 1.5 – 410 0.4 2.16 0.477 PFD2015-332ME_ 1.2 – 340 0.5 2.64 0.670 PFD2015-472ME_ 0.8 – 230 0.4 3.76 1.00 PFD2015-682ME_ 0.6 – 200 0.5 5.44 1.75 PFD2015-822ME_ 0.5 – 174 0.5 6.56 2.50 PFD2015-103ME_ 0.4 – 130 0.7 8.00 3.40 1. When ordering, please specify packaging code: PFD2015-103MEC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance is for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. 3. DCR is for each winding. 4. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

  • Miniature surface mount component, only 2.2 × 1.45 mm footprint and 1.5 mm tall
  • Typical applications are as impedance or isolation transformer
  • Can be used for balanced to unbalanced (balun) conversion
  • 1/4 Watt input RF power rating 1 4 11: 30.059 1,5 max max0.060 1,52 0.017 0,432 0.044 1,118 0.028 0,711 0.016 0,406 0.022 0,559 0.054 1,36 0.014 ±0.003 0,356 ±0,076 0.010 0,25 Recommended Land Pattern max0.090 2,29 4 3 1 2 4 3 Core material Ferrite Environmental RoHS compliant, halogen free Weight 13 – 23 mg Terminations RoHS compliant silver-palladium-platinum-glass frit. Ambient temperature –40°C to +125°C Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Winding to winding isolation 250 Vrms, one minute Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.63 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCBt_Washing.pdf.

Specifications subject to change without notice. Please check our website for latest information. Document 1005W-2 Revised 09/08/15 Document 1005C-W PFD2015 Wideband Transformers Typical Wideband Response Curves Attenuation (dB) 0.1 1 100010 100 Frequency (MHz) PFD2015-102 3 dB bandwidth:4.6 – 750 MHz Attenuation (dB) 0.1 1 100010 100 Frequency (MHz) PFD2015-122 3 dB bandwidth:4.0 – 730 MHz Attenuation (dB) 0.1 1 100010 100 Frequency (MHz) PFD2015-182 3 dB bandwidth:2.2 – 490 MHz Attenuation (dB) 0.1 1 100010 100 Frequency (MHz) PFD2015-272 3 dB bandwidth:1.5 – 410 MHz Attenuation (dB) 0.1 1 100010 100 Frequency (MHz) PFD2015-332 3 dB bandwidth:1.2 – 340 MHz Attenuation (dB) 0.1 1 100010 100 Frequency (MHz) PFD2015-472 3 dB bandwidth:0.8 – 230 MHz Attenuation (dB) 0.1 1 100010 100 Frequency (MHz) PFD2015-682 3 dB bandwidth:0.6 – 200 MHz Attenuation (dB) 0.1 1 100010 100 Frequency (MHz) PFD2015-822 3 dB bandwidth:0.5 – 174 MHz Attenuation (dB) 0.1 1 100010 100 Frequency (MHz) PFD2015-103 3 dB bandwidth:0.4 – 130 MHz